KT100 Swap vs Predator 212 did it work?

[@larryslade4117]

Loved that 2cycle sound! Don’t give up on it.

[@Disneyland1951]

PROBLEM IS GEARING! You are geared for 115mph. You are starting with a super high top gear... it will never get there. Put a 9 tooth sprocket and it will not KILL the clutch over and over.....

[@catalinnicolaevici2061]

That exhaust kinda sucks ass too I just got one with the 2 engines plus 2 actual racing exhausts that are ment for it.

[@chefscorner7063]

And here I was thinking you'd built a pretty good little racer. Just goes to show the difference in your experience (years), to my experience (hours). LOL.Wish I had more neighbors like you guys when growing up in the 70s and 80s. ;)

[@bjlracer1380]

Try 9 teeth on the clutch and about 84 on the rear sprocket, stall speed should be around 10,000 rpm

[@BillSibole]

Need to adjust the clutch inside of it It is adjustable .

[@mttoolguy1]

The clutch is toast. Buy a Tomar dry clutch. The Hortsman wet clutch is meant for racing and not just riding around

[@Lukas-c7c]

You’re losing all your power from no expansion chamber, just adapt a 3/4in clutch on it or cvt…

[@vgnope]

Put a patriot 100 triple disc dry clutch on it. I had the horstman wet, did the same thing. Went to dry and was way better

[@jasonblok9273]

Clutxh setting was to high more for a kt100 pipe class...with the small can exhaust 8800-9100 stall on the clutch...I've never had good luck with engine clutches...a jackshaft setup is best way to go...plus your gearing was off

[@jasonblok9273]

A can more will only rev 12,000 ish...where a pipe motor will rev 14,500 to 15,500...but don't go above that and this is all depending on what pipe you have

[@guillermo3471]

Should jackshaft it

[@martinjulecki2728]

On my KT100 I've got a two disk clutch on it and seems to be working great. Possibly made by Quarter Master but not sure on that. Pieced together the clutch with what I found.

[@darinbirge7250]

Gotta run type f transmission fluid and set the spring heights and air gap properly before trying to run the clutch or you’ll smoke like what was happening in the video there’s a manual for those clutches online and it would give most of the basic information on those clutches, it’s a horstman dxl clutch, they run really good as long as it’s set up properly

[@reesemolloy6109]

Part 2 Murray?

[@danielyepes4831]

Ill sell you my kt100 with 5 gears for your project k100 with a dt 100 bottom end running

[@ellgwapo.1754]

Soo' i nearly Sure That's Race Kart Not Work fore' 100% nice!.

[@jordi20180]

You need a good expansión chamber, in 2 stroke engines that is very importnat

[@vdubnickk]

try moving the engine more straight toward the sprocket or vise versa

[@catalinnicolaevici2061]

Mint right.... lol 😂 .... i just picked up 2 of them for 300$ no carbs tho everythings else. One of the blocks is brand spanking new. My only issue is someone had a plate welded to my frame for briggs style engines so im gonna have some work to do and spend some cash on at least one carb

[@TeamUnknownRacing]

you need to switch to a 2 disk bully clutch

[@USMC-Sniper-0137]

Just use a Comet clutch

[@SDS-1]

I don't know what is wrong but man alive she was SCREAMING 😮😮!!!!!!

[@danielfontes4240]

Go back to the lighter chain .get 80 rear sprocket and two disç dry clutch and put a bushing bet ween clutch and motor with 5000 play Depending on how and ware you ride ingage clutch around 4500 rpm to 6500 rpm

[@kiwiJetsurf]

id order a sprocket off aliexpress the same bore size as your kt100 shaft then bolt it on no clutch. push start it or start on jacks so it doesnt take off,

[@agathabergen7538]

She was screaming

[@toroagardiner]

Put a fuel filter in and a new exhaust made for the kt. Don’t use a clutch and see if it runs and if it does then the cheaper clutches aren’t gonna do it.

[@coolbeansinc.427]

Try a dry 2 or 3 disk clutch instead of the wet clutch

[@BlakeWagner-zt3mo]

Those type of engines take a while to get up to speed

[@rxity8580]

guys just go direct drive

[@richardhead3211]

damn

[@kerimgolos7101]

So cool

[@alexb4090]

sad