KTM 390 Oil Change / Service Light Reset

[@andywyatt5194]

Haven't worked on bikes for years so a bit apprehensive. I've just finished changing the oil.Great video,thankyou 👍

[@tonytrevino3204]

I'm so glad you speak english and the info you put in for resetting the service was very helpful

[@MotoMedicine904]

A lot of reason I make these videos is because I need that sometimes as well and none of the info was in English

[@tonytrevino3204]

@@MotoMedicine904 then we feel each other's pain lol Brothers in arms lol

[@hatchetjack1031]

And the RC390!😊 changed oil ,screens and filter today. Service bar will light up after another 60 km. Thx for the Tips! Ride safe!

[@rishiagarwal3300]

Just did my first oil change on my Duke. This guide was perfect. Great pacing and details.

[@MotoMedicine904]

Thank you!

[@motoadventurer7780]

Outstanding tutorial! I just purchased a 2020 KTM 390 Adventure, and since it's the same engine as the 390 Duke, your video is applicable for both bikes. Well done!

[@eyedrz]

I've looked at several of these videos and this is the best one, by far. Very informative with extremely clear video of where it all is

[@MotoMedicine904]

Thanks

[@devonheiduk7497]

I just snagged a 390 and your videos have been really helpful with all the next steps, thanks man!

[@MotoMedicine904]

Thank you! Always glad to hear people are finding the content useful.

[@alejandrotorres8649]

Thank you so much for this. Nervous to do my first oil change on my own but this video helped tremendously. 10/10

[@MrEquequ]

Excellent instructions. All DIY videos should be this good.

[@gowengetter4599]

I’m very very very seriously considering getting one of these bike as my first road bike. Thanks for all the videos content on this Duke!

[@ekfotos]

Its fantastic ! Do it !

[@FatherGixxer]

Thanks really helpful, never knew a bike oil change would be harder than a car lol. I love my 390 my first bike ever and I gotta say I really love it. I feel like KTM is trolling us with the filter removal, I had to puncture it with a screw and wedge it out.

[@tonygiovanni7598]

Awesome video bro. Just got my own duke 390 today and I’m gonna do a service on it. Thorough and easy explanation, you got a new subscriber. Ride safe.

[@RVAMotorsports]

Thanks man, I just bought a 2015 Duke 390 and I'll be changing the oil and filters in it tomorrow. Huge help!

[@PicturePilot]

Great video...clear, straight to the point and very informative. Made my oil change a snap...thanks for posting!

[@hatchetjack1031]

Saw an offer on Amazon that features quantity discounts for KTM/HUSKY kits w/o oil. 4 liter oil separate, good for 2 changes.

[@bowhunter7565]

Wow a step by step tutorial on how to actually do it properly. Great job man. Except I can’t find these kits for $50 more like $70😫

[@chisedevilla]

Great video! When it's time to change the engine oil and filter on my Husqvarna Svart 401, I'll be watching this again. Thanks mate.

[@joshmcaden]

Thank you for doing this. I know it’s a lot to ask, but could you possibly share a link to some kind of “starter pack” service kit”? I don’t know what tools I need, nor do I know what products to buy…or even where to buy them! I only know what kind of oil I need. I’m brand new to motorcycle riding and I just surpassed the break-in mileage on my new Vitpilen 401. Any help is greatly appreciated.

[@GrowthGuided]

Thank you kindly for uploading this one. About to get down to business on my 2018 390.

[@buzzmorales4339]

Good video, thank you for being through, other don’t even tell you how much oil to add back in ! Way to go this is a GREAT How To Video.

[@hannahhankins8289]

Thanks for linking the kit!

[@gordlockwood1213]

Thanks for the great video! I just bought a 2015 Duke 390 so this video will be a great reference guide. I subscribed and will check out your video on the slider cover that you mentioned.

[@tylerwall5075]

Thanks for the video it was very helpful I just did my first oil change on my 2020 390 duke

[@Alien937]

Excellent video. Subscribed!

[@HamsterNeedWorld]

I am using fully synthetic oil from 1 year can I use this semi synthetic oil now Thank man

[@foldi001]

The only video where you can see what's on the display.

[@felixgutierrez1871]

Thxs ! Helped on my 401 Husqvarna.

[@manybikes]

Great step by step video!

[@MotoMedicine904]

Thanks bro

[@manybikes]

MotoMedicine Yes Sir!

[@pace8956]

my man !! you just saved me many $$$ tyvm !

[@ricardoardiano1550]

Really helpful and nice easy to understand video, big thanks for taking the time to do it

[@AverageCarGuy]

Excellent job. Got done in no time.

[@khreiff]

I appreciate you. Nice job on the torque specs.

[@19chrisrego79]

How frequent or km interval you replace all the oil strainer.

[@markgilgorobat5296]

Awesome tutorial video! Thanks!

[@twonk890]

Very good video. Nice work.

[@BobMeowley]

Hey whats with the yellow Motor LED. Its on at my bike too and when i start it its still there. Ty

[@joelw2409]

Thanks for this video. Makes it quick an easy. I just did my 3k mile oil change. Last changed at 600. Is it normal to have metal shavings on that first filter? My bike was stolen and I stole it back and had a low oil pressure warning on. So I decided to change the oil. Thanks

[@MotoMedicine904]

Yes its normal to see what looks like a lot of metal shavings on the 1st oil change because this is the period in which the motor is seating in. After that it should be very minimal.

[@amihateyou3756]

That strainer on the left side and the bottom, is it the same? Or just another type of strainer? Hope you notice me.

[@alastairtheduke]

Do you have a link to the gloves you're using?

[@thomasloupe2583]

Thanks for the video. I like your windscreen. What is it??

[@MotoMedicine904]

Its made by Puig. Theres a lot of knock off brand ones that are the same as well for a little cheaper.

[@vsnutz]

Why the svartpilen does not have the TFT is beyond me, that would be awesome.

[@Pablo-hi8gl]

Este video me sirve para mi husqvarna svartpiten 401!!! Gracias ✌Bssss

[@almaflores7189]

How much is .8 quarts more then half?

[@mtbiker64]

Shouldn't the bike be level front to rear as well as side to side when you check the oil level? Yours is elevated in the rear causing the oil level in the sight glass to appear lower than it actually is. Otherwise, very good video. Thanks for posting it.

[@MotoMedicine904]

After checking it in both on the stand and off it actually makes maybe only a millimeters of difference in the sight glass.

[@picooo-pt5191]

Very nice !!

[@user-to3jr6qp3y]

how do we know the exact pressure of the bolts,is there a chance cracking the engine due to increased pressure?

[@MotoMedicine904]

You use a torque wrench which indicates when you've reach the right torque for each bolt. The threads on the engine case can strip if you go too tight but it takes quite a bit of over torque to do that.

[@theweejr]

where can i order those oil change kit

[@dimitriszafeiropoulos272]

hello the kit is not available anymore. Do you know where can i get one for ktm 250? Thank u very much

[@markprater72]

Very good video. Thank you

[@miketran4289]

There's a VERY good reason why you didn't fill it with the full 1.7L.. it's because the oil filter cavity wasn't filled until you ride the bike. You need to put in more oil after the ride since 200ml is now inside the oil filter cavity.

[@MotoMedicine904]

That’s explained in the video…

[@sdefiel3719]

I have heard this is good for the 390 Adventure, correct?

[@MotoMedicine904]

Yes, the motors are the same

[@zixianliu4388]

Hi, is it possible to reverse the net service time? I accidentally put next service on next 500kms but the service time goes 1year forward. Thank you.

[@MotoMedicine904]

You can adjust the mileage at any time. Ut only by the built in intervals. The 1 year stays the same no matter what. It will trigger the light at the miles when passed or 1 year whichever comes 1st.

[@riccardobrancato8864]

Hi. Super helpful video. I’m doing my own oil changes from now on. Where did you get your screws to cap where the stock mirrors were? Thank you.

[@MotoMedicine904]

You can buy them on amazon. Just search for Duke 390 mirror plugs.

[@gabrielrigby4984]

Can’t seem to find any concrete answers even in the manual so here it goes. For the 401 Vitpilen, does anybody know the easiest way to replace the lower oil screen? Asking because the exhaust on the Husqvarnas is routed directly beneath the oil screen. Trying to avoid removing exhaust. Any feedback would be awesome. Thanks

[@brxconspiracy]

You’re gonna have to loosen the exhaust don’t completely take off the bolts just loosen it till it has play and you should be able to reach the bolt

[@gabrielrigby4984]

@@brxconspiracy I appreciate the response that’s exactly what I did. Now I’m dealing with the skid plate vibrating against the exhaust. I have moved the exhaust but I still get that vibration coming through.

[@hatchetjack1031]

Been searching for a month, checked manual. Asked everyone.. CAN YOU PLEASE TELL ME HOW TO SWITCH DISPLAY FROM KPH TO MPH???Bless you if you will!😊 thx!

[@Iam-ix4he]

You'll find it in the display itself... Just go through the options you'll find it

[@caronibalogna]

You didn’t mention that you have to take off part of the exhaust to get to the second bolt for the smaller screen :/

[@MotoMedicine904]

You must have a 2021 duke because on the 2017-2020 you do not have to do that. My generation has an exhaust that sweeps around the side where the newest one goes underneath

[@slyrez]

Is the process and parts identical to a svartpilen?

[@MotoMedicine904]

Exactly the same since the motor in the Husqvarna is the same motor.

[@slyrez]

@@MotoMedicine904 perfect. Thank You

[@stonebeard2194]

Yo thx so much!

[@Davojo]

If you have 0.1 liters left then you really overfilled the manual says you have to put 1.7L in there. When i changed the oil in i also put a little more in there because i could not see it at the glass but when i went for a long ride and checked the oil it was above the glass. So a bit overfill (50ml) should not be a problem but i think 200ml is. Just do what the manual says... Good luck!

[@ghostc3566]

U are correct when u say so what the manual says but also wrong u shouldn’t check oil while ur bikes warm it’ll expand and show more then u rlly have always check while ur bike is cold much more accurate reading

[@Iam-ix4he]

@@ghostc3566 That's wrong. Always check oil while engine is on operating temperature after switching it off for 2 mins

[@SOLO-ht2cc]

How long du you have to drive before the bike Starts overheating?

[@MotoMedicine904]

My bike has never overheated. Ever.

[@SOLO-ht2cc]

@@MotoMedicine904 what model is it ?

[@MotoMedicine904]

@@SOLO-ht2cc 2018 KTM Duke 390

[@SOLO-ht2cc]

@@MotoMedicine904 thanks for letting me know, cuz I heard that the 2017s heats a lot..

[@sameersam896]

In my duke390 showing a oil pressure low warning in TFT screen ,plz help

[@MotoMedicine904]

Check your oil level 1st. Of your oil level looks fine there has been some people who reported faulty oil pressure switches and had to get them replaced.

[@sameersam896]

@@MotoMedicine904 today only I fill 1.7L oil , but it's not gone ,now what I want to change 😔

[@sameersam896]

@@MotoMedicine904 thanks for reply

[@cjderosier8589]

Where do U buy the kit online?

[@MotoMedicine904]

AOMC sold it but I've heard they aren't doing them anymore. You'll have to check.

[@thomaskurek3524]

The first oil change at 600 miles should I do myself or should I go to the dealer, I change oils on my cars on my life so I would like to do the same on my bike 390 adventure, but I heard there is something they have to unlock the engine RPM, or there is a way I can do this myself. If anybody know anything about this please write me back thanks.

[@MotoMedicine904]

You can do it yourself. They don't unlock anything manually. The RPM shift warning settings will unlock on their own.

[@thomaskurek3524]

Thanks for Quick answer

[@rustyshackleford6259]

now WHY doesn't all other oil containers have those sweet flex tubes???

[@MotoMedicine904]

Personally I found them annoying 😂

[@Chris-yy7qc]

11:50 The engine filled the oil filter case with oil again...

[@MotoMedicine904]

What you might be seeing is this little bit of oil that gets stuck up against the glass in the very bottom of it. Even when the bike was empty you would see that little millimeter of a line in it cause it was stuck

[@Chris-yy7qc]

@@MotoMedicine904 Wrong. Its the same on every other engine. Even engines with dip sticks. When you start the engine for the first time the oil pump fills the empty oil filter case with oil. Thats why the oil level is lower after the first run.

[@MotoMedicine904]

@@Chris-yy7qc i think we are both thinking of two different things. But I stated in the video that the reason you have to run the bike and check again was because oil has now filled passages that cannot be filled by simply pouring the oil in the motor

[@Chris-yy7qc]

@@MotoMedicine904 Jep and I told you thats wrong. There is no spaces/cavities which hold a big amount of oil. That woulnt help when changing the oil at all. The only reason the oil level drops us because the filter case is filled with oil again.

[@MotoMedicine904]

I said any spaces and cavities. Which would include the oil filter case...so how is that wrong..I think you're over analyzing it

[@trehanero]

Crap