KTM Duke 390 Full Mods Overview

[@MotoMedicine904]

Links to most all of the parts have been listed in the description!

[@christophschwarzherz5909]

I recently bought a 2017 KTM 390 Duke - after a week it died. It had one of those Coober intake mods - well that closed-cell foam filter came loose and got sucked down into the throttle body which explains the P2111 code. I used a cable extractor tool to pull out the wad of foam and the bike worked after that. I'm getting rid of that Coober crap and restoring the the factory cover plate. Besides, without a piggy back ECU, you're giving extra air, without extra fuel, so it will run lean and harm the engine.

[@BrickTop70]

Good job, the first thing I too, had to do was to install a PowerTronic, the thing was so jerky at low rev

[@gordlockwood1213]

Thanks for the video! I like that engine slider guard. Looks cool. Is there a video showing the install?

[@montgomery3605]

Excellent narration skills!

[@jakedeadmon1183]

l live and ride only on a twisty mountain road. Also a 2018, full cat/ pre-muffler delete( 14 lbs)- it is louder than I'd like but not enough for that cast iron teapo t, w/ stock silencer, removed passenger bracket/pegs. Rapidbike Evo, seat cowl, Woodcraft clip-ons, Andreani Fork Cartridges, Olins shocks, adjustable pegs, Michelin Power Cup Evo tires w/ warmers.

[@bve7397]

Did you notice a big power difference with the powertronic unit?

[@Navroze]

Yes, and I have put YSS fully adjustable rear suspension

[@kwixx]

your power mods, the ECU , pipe, air intake..what or how much of a difference did it make, and have you Dyno'd the bike before and after?

[@ragul6356]

Dude apart from weight reduction with full system , air intake and piggy bank ecu , I've seen people say they got increase in gains like 55 hp and 49 nm torque and an extra 1000 rpm unlocked just so you could rev a lil extra. And I'm not so sure, just saying what I've heard :)

[@rdbreno559]

one of the first things i did was remove the passenger pegs, so clean... :-P

[@petergoudy9013]

I'm leaving them in case of the rare event that I get lucky. ;)

[@charlesbatsold31]

Ive got an old lady... I cant ditch mine..😞 😄

[@mikepalmer71]

Good video. Thanks for the links to products.

[@Navroze]

I have changed my mirrors. The windshieled is the same but transparent yellow..I wanted a clear one but not available. Plus tiny crash bars which are unobtrusive and good looking

[@yvanglav4344]

Shovell head. I can not unsee it now!

[@Navroze]

I too have small unobtrusive crash bars and a yellow windscreen..couldn't get a clear one which is what I wanted

[@superbyke125]

Those indicators are gigantic

[@bryangonzalez5570]

Thus the Mimi cat delete helps to do pops and bags?

[@Robocoppat]

Great product placement video. I've been wondering and had to ask, doesn't the bar end mirrors get in the way when braking or using the clutch? Does your hands ever hit the mirrors???

[@MotoMedicine904]

Never had an issue with them getting in the way.

[@petergoudy9013]

Excellent rundown.

[@phmiii]

I Love K&N Filters!

[@juanpolanco2691]

Nice mods! 👍🏽

[@chriscvgg3611]

Any ecu for the 2016 😢

[@thebronextdoor3583]

I've installed the same cat delete and a leo vince slip on all running of stock ecu. Will that affect my bike's engine life long term ?

[@robertocastillo5180]

Hi! Great video! Where can I find the engine slider? Thanks for the answer!

[@MotoMedicine904]

The ones around the engine cases came from Aliexpress. They're hard to find

[@jaidenblake8566]

Hey bro, where did you get the orange fairings from?

[@MotoMedicine904]

They’re factory. They just didn’t have any decals on them at the time

[@osamaaijaz4055]

hey motomed, what rear tires re you using on ur bike?

[@MotoMedicine904]

Dunlop GPR 300

[@osamaaijaz4055]

@@MotoMedicine904 thanks

[@bman_-ze4gu]

Just picked ap a used 2017 duke and it has the comp werks mini cat and premuffler delete aswell as the comp werks slip on and I'll tell you it's super loud. Definitely do the mini cat and slip on first. Unless I get my hands on a stock pre muffler I'm stuck with the loud pipes.

[@MotoMedicine904]

You can find them on ebay for pretty cheap. Just take a look around.

[@shanemarcum8116]

Could you send me a video or audio clip, I’m curious😂

[@MohammadHamza]

which map returns better mileage ? I have installed it on my duke 200 PLanning to use one map for city use/mileage and second map for top end/highway Running on the maps provided by powertronics

[@MotoMedicine904]

You're not going to notice much of a measurable difference in MPG between the 2 maps.

[@MohammadHamza]

@@MotoMedicine904 Okay one more thing Duke 200 lacks initial punch that's under 4500 rpm and there are no changes made on Powertronics map under 4500..So anyways to reduce the jerks and sluggish performance under 4500 rpm?

[@MotoMedicine904]

@@MohammadHamza take it to a place who can professionally tune it on a dyno.

[@gekolizzard]

Looks like you drilled out the baffle..

[@1990-t1j]

Handlebar sizing: what is unique about it, please? I am a new 390 owner, and this video is very interesting. Not so keen on the screen, though. I have subscribed.

[@MotoMedicine904]

The handlebar is lighter and stronger. Has less rake towards the rider and makes inputs for steering sharper and more responsive.

[@tedost]

What map are you using for your powertronic with these mods?

[@MotoMedicine904]

A custom dyno tune file.

[@luisalvarado1901]

top speed?

[@alimehrozi2828]

I'm 6'4 220 lbs and I'd like to take my gf on this bike with me she's 5'7 150 lbs will this bike be able to carry us both ? It will be city riding / suburb riding no more than 60 mph

[@MotoMedicine904]

It will do it. Just don't expect it to be a power house. But you're within the weight capacity

[@alimehrozi2828]

@@MotoMedicine904 lol too late just bought a MT 07

[@MotoMedicine904]

Can't argue with that. I want one myself.

[@tri7272]

When u say "to be honest with you" it makes me think if you dont say it first its not the truth haha. Just teasing. How much HP extra did u gain from the mods? Thanks.

[@MotoMedicine904]

The bike I share that tune with and the exact same mods made 48whp on the dyno. A stock 390 makes about 40whp

[@tri7272]

Thanks 🏁🏁

[@airdreams1]

I just wish there was something that could be done to make the Duke look better. I mean it just looks terrible all the way around. Adding that windscreen really doesn't make it look any worse than it already does LOL

[@demonsync57]

Yea its called a Svartpilen 401.

[@llerradish]

Hi I just bought a used 2017 came with tail tidy and same exhaust you damaged. I like it so far, just turned 5k miles. Mine has a pretty loud engine tick, I thought it was valves needed adjusting but I've been hearing that it's more likely the cam chain. Do you know anything about that? and does anyone make a manual cam chain adjuster for it?

[@MotoMedicine904]

These engines are noisy by nature as well. You may be hearing injector tick as well, which is normal. As long as it doesn't sound like a bucket of bolts rattling around, you should be fine.

[@vibhumpatsute2116]

Silly question, but what does that coober filter cap do? What are the gains?

[@MotoMedicine904]

Allows extra intake airflow. Without a tune its usless. With a tune it seems to liven up the mid to top end power.

[@MotoTrist]

Shweeet dude 😁🔥👌🏼

[@Dabetus01]

Can i get the powertronics map that you have?

[@MotoMedicine904]

DM me on IG

[@MrCocoawesome]

Yo I tried but can't find you on instagram

[@MrCocoawesome]

@@MotoMedicine904 can I have map link please

[@JTravis2015]

@@MotoMedicine904 I also can’t find you on ig

[@thenneshvijayan1510]

That windshield is not suit for Duke390

[@gabrielputra5655]

Did you remove your db killer on your stock muffler?

[@MotoMedicine904]

Yep, Theres no DB killer in mine.

[@gabrielputra5655]

@@MotoMedicine904 do you have sound clip of it?

[@MotoMedicine904]

I dont think I have any but its not much different from when I had the Yoshimura on it

[@gabrielputra5655]

@@MotoMedicine904 does the performance improved after you remove the db killer?

[@MotoMedicine904]

Not not really. Its just for sound. If you want power you need an ECU

[@private.eyepublisher]

What the size of your tire?

[@MotoMedicine904]

Same size as OEM

[@RANDY23WEI]

how tall is this guy we talking about?

[@MotoMedicine904]

What guy? Me?

[@zjw663]

@@MotoMedicine904 yes sir, I am considering if I should change the handle bar in video

[@akeenonwamarah3554]

Where can I get the piggy back is it plugged and play

[@MotoMedicine904]

Links in the description and yes its plug n play

[@akeenonwamarah3554]

Why didn't you leave a link to the parts that u use

[@MotoMedicine904]

I'm working on compiling the list

[@Smylesatticus]

The only mod worth mentioning is the ktm seat upgrade the rest are just nonsense

[@ratneshparkar5543]

Can you send me coober cap?

[@MickVB73]

Tried to find you on Instagram. The stupid AI says you’re a KZbin channel and not in Instagram.

[@MotoMedicine904]

I converted my IG back to a personal account during my off time from the channel because I wasn’t sure if I’d be back

[@MickVB73]

Cool. I subscribed through yt. I’ll hit ya up to pick your brain after I secure the bike.

[@RhoadsChristopher]

Needs a stretch

[@MotoMedicine904]

You're no longer the winner of the giveaway for that comment 🤣

[@RhoadsChristopher]

Hahaha

[@gekolizzard]

That windshield is crap..