ktm HOW to Clean O2 Sensor

o2 sensor
is controlled via the ecu to regulate fuel
and air for combustion
wrond reading due to carbon buildups will cause iregular
engine operation and rpms (autothruttle )
the best is to replace the part
after cleaning it
its better then it was before
thanks 4 watching
Mechanics & DIY
Cylinder Seven מאת Chris Zabriskie Attribution 4.0 של Creative Commons. creativecommon...
chriszabriskie....
: chriszabriskie....

[@scooba42084]

love the menacing music fits very well lmao

[@scooba42084]

@@MechanicsDIY second track sounds better in my opinion 🤙. Also I don't know if you've got a theory, but I have the same 125 engine in an RC. It's come up with an engine light after riding for a few hours, after an oil change, also sluggish throttle response. Can't wrap me head around it.

[@MechanicsDIY]

​@@scooba42084 did you replace the oil filter too ? 2 sluggish thruttle can be solved by fuel addtive cleaner like k44

[@scooba42084]

@@MechanicsDIY Replaced oil filter, spark plug and fuel filter. The bike wouldn't turned on beforehand but after replacing fuel filter it was running again. The engine light didn't come until about 4-5 hours of riding spaced out between two days.

[@MechanicsDIY]

@@scooba42084 you can do a k44 fuel addetive engine cleanup and see if it's solved ,, the lights pop for varios reasons . carbon buildups is an issue solved by an addetive - slkuggish thruttle is a symptom for a dirty engine

[@scooba42084]

@@MechanicsDIY cool I'll try that thanks bro

[@PemadamGergasi]

If the bike suddenly use more petrol than usual, should replace this sensor?

[@MechanicsDIY]

dirty engine/sparkplug causes more fuel consumtion . the sensor can affect this too ( if all the rest is clean ) using a fuel adddetive like k44 will clean the intake valves /sparkplug /injector . and can restor the engine normal power

[@PemadamGergasi]

@@MechanicsDIY 👍👍

[@alvinartuz9023]

Does pulsar rs200 oxygen sensor same with ktm oxygen sensor???

[@kuttalu]

yes

[@tsamokingn6599]

How to we know if sensor has to be clean

[@MechanicsDIY]

after 25k km or 5 years . or fuel to air control issues