Kuat Sherpa 2.0 Platform Hitch Mount Bike Rack Assembly, Install and Overview

[@rackattack]

🛒 Order here with FREE delivery: www.rackattack.com/hitch-bike-racks/kuat-sherpa-2.0-2-bike/ Want to transport heavier, bigger tire bikes? Check out the Kuat NV 2.0 kzbin.info/www/bejne/rV7di5uVr9N4nc0

[@suzannecarpenter9077]

This is THE VERY BEST instruction on assembly of this bike rack there is anywhere! Only two things of note: they don’t provide written instructions in the box anymore. They have a card with a QR code, and that takes you to the instructions, and another QR code for a video on assembly, which is LAME and unhelpful! The only other thing is that he opens the box and he has everything all ready to start assembly. This sucker is packed with tons of stuff on it that he obviously removed prior to the video. I wish he had shown removal of all that packing too. Seems like it should be obvious, but not for everyone! His instructions on actual assembly were FLAWLESS! Awesome, awesome. I’m a 62 year old woman and did it myself with only him teaching me! I never looked at the instructions online!

[@burhanco]

The best unboxing video. Narrator took his time with the essential steps. Great! Thank you.

[@rackattack]

Hello. Thanks for the positive feedback!

[@DavidTwedt-kx1tu]

Great demonstration! No need to read instructions and the process was simple. I wish all how to videos were as good as this one. Thanks

[@mrktm65sx]

Thank you for your very helpful video! I was able to easily assemble the rack by following your simple-to-follow instructions; never even touched the paper instructions!

[@RyanConklin]

Great video! Excellent narration, Paul! Thanks!

[@56silverado]

Fantastic video! I somehow lost the paper instructions within 5 minutes, and the video was absolutely invaluable. Great clarity of presentation. Cannot thank you enough!

[@rackattack]

Glad it helped, Robert!

[@jennyssewingroom6324]

THANK YOU. This was the most helpful of the videos we came across. Saved the day.

[@jeremyjackson8643]

Great video! Is there a vehicle compatibility chart? Trying to see if this would work on a 2008 Toyota Yaris and which size version to get.

[@bodyfusionsmassage7774]

This is an exceptional video showing exactly how to put this rack together and how to secure your bike in place. Thank you so much.

[@UTube4Junky]

Can’t thank you enough for this video. Purchased Kuat Sherpa at REI thinking instructions would be inside and that it’d be an easy install. Well, for whatever reason there were no instructions inside the box and I hit the wall BUT then I found your video (thanks google) and you made the process a breeze... very detailed, methodical and easy to understand. Thank you!!!

[@richyg3993]

Pretty sweet rack. How well does it work with a large or extra large mountain bike that’s modern and has slicker head tube angle. The slacker head tube angle makes for a longer wheel base. Would a large, slack, modern enduro/trail bike be too long for this rack?

[@LynwoodPearcy]

Great video. Thank you!

[@rackattack]

You are welcome!

[@peteclay4390]

Great vdo...don't ever think a cable will protect your bike from being stolen...bolt cutters will cut through any cable...all bikes over $5k should come with an alarm system to stop bike thieves. Some bikes cost as much as a car and it is a huge business for thieves.

[@RichardsWorld]

Like in the video. Put it together while in the box. I took it all out and it was difficult. I ended up putting it in my hitch receiver to put it together from there.

[@rackattack]

Hello. Kuat created a unique in-box assembly method to ease installation. I can still be assembled using other methods, it's just more cumbersome. Thanks!

[@philh1245]

you explained everything, I'm having trouble with using with 2 bikes just awkard to hold it to lower it to access the trunk. this is a great product! bought one and loving it.

[@rackattack]

Hi Phil, I always find if you have someone to help guide the weight of the bikes and rack down as you reach for the lever its a lot easier. On some taller vehicles you can use the lever as a foot peg. Glad you like it otherwise.

[@cordovasantiago]

I have one, but I am afraid that the heat from the exaust will damage either the wheels or the rack, how far from the exhaust need to be installed?

[@TrekkingTogether3]

Thank you! This video was VERY helpful. The Kuat instructions on video on their website were poorly lacking.

[@rackattack]

I am so glad it was helpful!

[@carlaweinkauf9495]

Great video. The paper instruction never even mentioned the front plate on the front tray. Perhaps it was because it was taped in place, but still a strange omission.

[@rackattack]

Hello. Yes, the plate is "preinstalled" temporally with tape, this saves an installation step. Thanks!

[@skchang168]

Once you tighten the front wheel hook to hold the bike, what's the space given if you rock the bike back-and-forth? As I drive I can see clearly see my bikes are rocking back-and-forth and I am wondering is that okay or what? Thanks.

[@rackattack]

Hello. It is important to position the front wheel arm hook as close to the first point of contact at the front fork as possible and apply very firm downward pressure. Test the stability by rocking the bike(s) side to side by hand. The amount of movement while driving should be no more than the stability test. Also, confirm the tires are inflated to the recommended tire pressure. Thanks!

[@dorothereijnders335]

Thanks - it made assembling the bike rack a breeze!

[@rackattack]

Great to hear!

[@saintEmory]

Outstanding work, you make everything looks so easy. Bravo!

[@rackattack]

Hello. Thanks for the encouraging feedback!

[@Skirkly]

Thank you. Excellent. I think I can put it together myself without husband with this video. One question, do you know how this compares to the Yakima Holdup. We plan on taking bikes on trips where the driving distance is about 7 to 8 hour drives.

[@minniefloyd5536]

Shirker - did you? because I am afraid to start

[@Skirkly]

My husband did help but this video was very helpful. It would have taken us forever without the video. We paused and fast forwarded a lot.

[@mirandasi8302]

Can you demonstrate how to access the trunk with 2 bikes? It’s so difficult to access the clip.

[@rackattack]

Hello. The hand lever is also a foot lever, it may be easier for some to access the foot lever to lower the platform. Thanks!

[@janepaulafrancisco6021]

Thank you for this, we'll install the bike rack later.

[@rackattack]

Very good, thanks!

[@2906rick]

Thank you!! I just did assemble mine!! Clear explanation and helpful tips!!

[@rackattack]

Glad it helped!

[@DeuceDeuceBravo]

Great video, thank you. I did not see the note about leaving it in the box, and naturally I just pulled everything out. Big mistake. Install took easily three times longer than it should have. ASSEMBLE IN THE BOX! 😄

[@rackattack]

Thanks for sharing! Yes, that step helps a lot!

[@michaeltartaglia2112]

Great help with assembly and use, thanks

[@rackattack]

Glad it helped! Thanks for the comment!

[@user-id6sy2nl9l]

We looked at several other videos and were so relieved to find yours! Thanks for your meticulous directions--the manual is horrible. We would have dissolved into two groaning puddles without your help.

[@rackattack]

Glad we helped you stay a solid! Happy you found us, enjoy the ride!

[@vladmex]

Great demonstration video guys

[@rackattack]

Hello. Thank you!

[@jackzhang3742]

Very clear instructions!

[@miahurr23]

Thank you for the video. Will be very helpful before I start my installation!!!

[@anitamcentofanti3277]

My bike is a step-thru with front fender and rear rack. I have yet to find a platform rack that can work with my bike.

[@rackattack]

Hello. Consider the Yakima OnRamp, check it out here: www.rackattack.com/hitch-bike-racks/yakima-onramp-2-inch/ Thanks!

[@dtmchemistry5279]

Wow sounds like such a great bike rack!!

[@rackattack]

Hello. Yes, ideal for those wanting to transport two bikes with a very light, easy to manage rack. Thanks!

[@ShantaKarunaratne]

Very detailed and clear instructions. Thank you so much.

[@rackattack]

Glad it was helpful!

[@JuanCruz-dt9rb]

I would love to know if this rack can be used on a Jeep Wrangler with the spare tire on.

[@rackattack]

Hello. Can't say for sure without a test fit, we'd invite you to visit the store closest to you for a test fit: www.rackattack.com/store/ Thanks!

[@scotteger6271]

I have two questions/concerns about this rack. First, do you have to go as close to the fork as possible? I’m adding fenders and rear rack to our bikes (to carry a child seat) so I need it away from the fork some to clear the front fender. Second, when this is in the upward stowed position, it looks like the inward tray’s front wheel tray/arm would be right near the vehicles exhaust, if it exists on the right side. I’ve seen some melted rack pictures on Amazon…is there anything that can be done to prevent this damage?

[@rackattack]

The rack does need to close to the front fork as that is the main component which holds the rack. If you will be running front fenders, I would not recommend this rack. As far as the exhaust issue, the solution which Kuat has designed is called the Hi-Lo pro. This product will raise of lower the rack to avoid the pesky exhaust flumes.

[@scotteger6271]

@@rackattack can you recommend a rack that functions well with rack and fenders? Preferably one that doesn’t cost a fortune…thank you

[@ShaneHarderPhoto]

Great video, one question, it doesn't seem like there's a lot of adjust ability for different sized bikes. My wife has a small frame 29er and I have a Large frame 29er but plan on buying a 27.5 plus bike this year (probably around a 3 inch wide tire). Seems like the NV 2.0 would be a better rack for me, is that a correct assumption?

[@rackattack]

Shane, The Sherpa 2.0 does not have adjustability, but with the spacing design, it is very rare to have clearance issues. The NV 2.0 does have adjustable front wheel holders which do help offset the bikes.

[@danfuerthgillis4483]

The only thing I don't like is that the front wheel on that mountain bike is taking all the bumps from the road which will lead to issues with the disc brakes as the front wheel is literally holding up the whole bike.

[@Nick-kq2sw]

Great instructions. Thanks!!!

[@rackattack]

Glad it was helpful!

[@richardsworldtraveleryoutu9274]

Do dome police stop you if you can't see the license plate?

[@rackattack]

Hello. Most states require the rear license plate to be clean, lit at night and visible at all times, whether or not a particular law officer will enforce this is unpredictable. There are license plate relocation kits available for those concerned with this situation, eg: www.rackattack.com/hitch-bike-racks/yakima-platemate-license-plate-mount/ Thanks!

[@richardsworldtraveleryoutu9274]

@@rackattack Thanks for the info.

[@minniefloyd5536]

The hole in the back was not alligned for the bolt to go through.

[@rackattack]

If you have that issue while assembling the rack, insert the rack into the hitch so you'll have leverage to lift on the end of the rack which will align the holes for the bolt to go through.

[@minniefloyd5536]

thanks! i will try it tomorrow.

[@donnakoenig2624]

Great demo

[@rackattack]

Hello. Thanks for the encouraging feedback!

[@PathfinderGregg]

Excellent video. Very informative.

[@tll39564]

What size hitch is that?

[@rackattack]

Hello. The hitch size on the featured vehicle is 2 inch. The Sherpa 2.0 is offered in both 2 inch and 1-1/4 inch.

[@davidwu5444]

Does it fit my Tacoma truck?

[@rackattack]

Most Tacoma's have a 2 inch receiver hitch, the Sherpa 2.0 is offered with a dedicated 2 inch stinger, here's a link to details: www.rackattack.com/hitch-bike-racks/kuat-sherpa-2.0-2-bike/

[@AlexBikemtb]

Thanks my brother and good explanation 👍.

[@rackattack]

Right on! You're welcome!

[@petercogan3396]

excellent.. thank you,

[@sebastianeschenbacher5856]

A great purchase

[@rackattack]

We're glad you like it!

[@texasanarchy]

Thanks!

[@DIYManiacJohnP]

Nice rack but the NV2.0 is a far superior design

[@rackattack]

Hello. Yes, the NV 2.0 is Kuat's heavy-duty, full featured, four bike capable rack. The Sherpa 2.0 is Kuat's light-weight, two bike only carrier. Both are great choices in their category. Thanks!

[@choski76]

good video.

[@samj1185]

nice rack but the price is up there.

[@rackattack]

Hello. Yes, this is among Kuat's premium models. Consider the Kuat Transfer 2, it will have many of Kuat's popular features but it's less expensive. Thanks! www.rackattack.com/hitch-bike-racks/kuat-transfer-v2-2-inch-2-bike-black/