Arc welding of two KUKA KR 5 arc HW robots - - - - Schutzgasschweißen von zwei KUKA KR 5 arc HW Robotern
Пікірлер: 53
@PebelWasTaken10 жыл бұрын
coolest one yet.
@BisdremisKostas8 жыл бұрын
there is a small delay on the beginning of the second robot, i guess no matter what there would always be a lazy guy at work.
@anarchomarko6 жыл бұрын
The company I work for bought two of these about 2 years ago and they've never successfully produced a single part.
@christopherlyle82856 жыл бұрын
anarchomarko that's the programmers fault... Gotta know how to weld too.
@messaoudbernia62566 жыл бұрын
christopher, are u a kuka programmer
@christopherlyle82856 жыл бұрын
messaoud bernia nope but I have experience on troubleshooting robots and I've been welding for 5 years
@christopherlyle82856 жыл бұрын
If you're not a welder don't even try this
@rahulbindhu2 жыл бұрын
Is it aluminium?
@mandataruu86858 жыл бұрын
you can put 1 mm pendulation , bcuz the arcweld sound wery on the limit.
@Vivungisport4 жыл бұрын
Sounds like two bumblebees on high octane.
@gredangeo7 жыл бұрын
This is the kind of welding I could do. I can know the theory as much as needed. But my arms aren't going to move properly and where they need to go, (I blame that lack of ability on also not knowing how to draw). I'm sure I can program a bot.
@christopherlyle82856 жыл бұрын
gredangeo or maybe knowing how to weld would be a start...
@capnthepeafarmer10 жыл бұрын
Why is it so slow on the approach and retract movements? And why for the delay?
@superdude90778 жыл бұрын
So they don't put much stress on the servo motors?
@davidrichards36058 жыл бұрын
+capnthepeafarmer It is slow because it is in teach execute mode which is about 25% of full auto speed. The delay between the 2 is usually because with synchronised robots one is the master, the other the slave so the master controls everything and gives the start signal and you can get a slight delay from the slave robot receiving it.
@kwamerobinson93645 жыл бұрын
what is the worker function does this make it easier for the welder
@sictransitgloriamundi70333 жыл бұрын
Its goal is to replace not help
@kkknotcool2 жыл бұрын
@@sictransitgloriamundi7033 Bull shit. This robot is not smart enough to totally replace and QC products. The point of industrial welding robots is almost always as a way to increase productivity. You take a good welder and teach him programming and give him a robot or two with one of these swivel jigs and he can double his productivity by setting up the material in the jigs and tacking it together for full welding. And when the robot runs out of wire or gas or gets a gummed up nozzle or whatever he's there to fix it for the robot.
@mwanikimwaniki68012 жыл бұрын
@@kkknotcool exactly. Robots work best when a human is around
@kkknotcool2 жыл бұрын
@@mwanikimwaniki6801 I'd go so far as to say the vast majority of the time robots ONLY work when a human is around. Most industrial robots are glorified CNC machines,(no feedback or logic, just machine paths and error sensors) somebody still has to babysit, even under the best case automation scenario.
@MoonchildTWXZG30003 жыл бұрын
kuka robot know how work perfect
@nailademirovic75805 жыл бұрын
Can someone explain what is function of commutation in robotics
@firesculpturevideo9 жыл бұрын
Do robots make robots? Do kuka bots weld on kuka bots?? I'm Kookoo for kuka puffs!
@MrBen5279 жыл бұрын
+justin gray They do have a vid somewhere of Kuka robots assembling new Kuka robots.
@rakeshkumarp.s.r.52294 жыл бұрын
Can it be customised according to our usage ?
@KUKARobotGroup4 жыл бұрын
Yes, of course. Let us know if you have any questions about robotics systems or automation at www.kuka.com/en-ca/about-kuka/contact/contact-form or in a direct message on Facebook at facebook.com/KUKAGlobal/
@BERRADAYouness10 жыл бұрын
is it acr welding method using TIG technology ?
@ewamat7739 жыл бұрын
it's MIG/MAG method
@BERRADAYouness9 жыл бұрын
ok thank's
@malikjalaluddin32396 жыл бұрын
👍
@horatio38524 жыл бұрын
From the shadow))
@miltoncoimbra69143 ай бұрын
Muito profissional essi robotico
@theberf53256 жыл бұрын
Sounds like a bunch of cats dying
@billnguy17756 жыл бұрын
eyyy du olle
@DeepFrydTurd Жыл бұрын
Way steadier than a human
@aguiluzhuisa904210 жыл бұрын
sumac kasan
@AnilKumar-xe9th8 жыл бұрын
Anil kumar
@rameshwarampackagingindust28184 жыл бұрын
dos
@itspassiono85085 жыл бұрын
Kuca cai cc
@theberf53256 жыл бұрын
First
@williamhuang53292 жыл бұрын
Hanzhen harmonic gear ,robot gear reducer, over 30 years experience