Kytes lights platform lights how i wire them up

  Рет қаралды 18,939

Chelmswood junction

Chelmswood junction

Күн бұрын

In this video i show you how I wire up the platform lights I get from kytes lights.
I will leave the links for the lights below.
Hope you enjoy the video please feels free to like, comment, share and subscribe to the channel.
kytes lights website.
kyteslights.com
kytes lights 6 ultra slim platform lights.
www.kyteslight...
kytes lights double platform lights height adjustable.
www.kyteslight...
amazon cock blocks.
www.amazon.co....
stay home, protect the nhs, savwe lives

Пікірлер: 36
@Rollercoastermadness1943
@Rollercoastermadness1943 Жыл бұрын
Hi peter Yet another brilliant tutorial and an easy way of doing electrics and keeping track and lighting away from each other.
@chelmswoodjunction
@chelmswoodjunction Жыл бұрын
hello thank you for the brill comments means im doing something right. hope you are still enjoying the videos in the future. peter
@rydermike33
@rydermike33 3 жыл бұрын
Many thanks. I'm never too great with electrics but you have explained wiring LEDs very clearly. Thanks again.
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Hi Mike A very merry Christmas to you and your family. Glad the video was of help to you. Peter
@roystudds1944
@roystudds1944 3 жыл бұрын
Great demonstration of how to connect the terminal blocks. Thanks for sharing. Roy.
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Hi Roy Glad you enjoyed the video. Peter
@AnneShowell
@AnneShowell Жыл бұрын
Great video baby you always put all your heart and soul into your videos.
@chelmswoodjunction
@chelmswoodjunction Жыл бұрын
i do try and do my best on my videos but still get nervous making them.
@TheHunterg30
@TheHunterg30 3 жыл бұрын
on thin wires , burn the end with a gas lighter, the outer covering comes off without damaging the wire
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Thanks for the tip I will bare that in mind when I get my next load of lights. Peter
@scotabot7826
@scotabot7826 2 жыл бұрын
Stupid question, but could you explain how the actual bus works? What is seperating the current in the bus? How does all the power not run together between each terminal. Are sections insulated from each other? Thanks a bunch!
@chelmswoodjunction
@chelmswoodjunction 2 жыл бұрын
the bus wiree system works using blocks the top row has one red wire goes to pin 1 and out on pin 5 to the next block same as the bacl in one 6 out on 10. then the bus wires go to the track from the bottom of the block ie red pin 1 black pin 6 to the same piece of track etc etc
@steve1000017
@steve1000017 3 жыл бұрын
Great video but how did you connect the variable voltage supply to your bus wire as these units come fitted a variety of ends
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Hi Steve The answer to your question is a very easy one I cut the end off and used the wires as you normally would. Hope the answer helps. Peter
@steve1000017
@steve1000017 3 жыл бұрын
I thought that might be the answer thanks
@Timwellsphotos
@Timwellsphotos 4 жыл бұрын
Them terminal blocks are very good been using them on my sons 00 layout and the n gauge budget build layout, good video and keep it up. Tim
@chelmswoodjunction
@chelmswoodjunction 4 жыл бұрын
Hi Tim Thank you for your comment im glad you enjoyed the video and I'm glad I'm not the only one using this way of doing things. More videos to come. Peter
@Crookedriverandeasternrr
@Crookedriverandeasternrr 3 жыл бұрын
Thanks for the info. I liked and subbed.
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Glad you liked the video and glad it was of help and welcome aboard my channel hope you enjoy more videos. Peter
@Crookedriverandeasternrr
@Crookedriverandeasternrr 3 жыл бұрын
@@chelmswoodjunction you’re welcome and I look forward to catching up on your channel
@paulmacey9084
@paulmacey9084 3 жыл бұрын
how did you wire up your voltage adapter to the block did you cut the wire and fix it to a block brilliant video
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Hi Paul You have answered your own question that's exactly how I did it just cut the multi voltage adapter of cut the wire and then done negative to black and positive to red and then daisy changed the blocks. Peter
@richardbaker5127
@richardbaker5127 2 жыл бұрын
Just came across your video, very interesting, going to use 12volts as the supply, do all the lights come with resistors or do you buy them separately
@chelmswoodjunction
@chelmswoodjunction 2 жыл бұрын
Hi richard Yes all the lights come with resisters supplied with the order but when ordering speak to them on how your going to power them. Peter
@GreenhillJunction
@GreenhillJunction 4 жыл бұрын
Hi. Thanks for the video. Considering doing lighting on my layout for the first time and using Kytes Lights so a wee search brought this up. Like the idea of those connectors, I've been using the Wago connectors which are a similar idea. One question, how many lights can you run off of one transformer?
@chelmswoodjunction
@chelmswoodjunction 4 жыл бұрын
at the moment I have one multi voltage adapter running at 3 volts and at the mo I have 26 street platform and depot lights and 4 double led lights all on that one circuit. multi voltage adapter cost me £9.99 from ebay and well worth the money.
@barra8771
@barra8771 3 жыл бұрын
With the multi voltage adapter what colour is the positive wire? Barra.
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
The positive wire if I remember should be the one side with white on it. Hope this helps. Peter
@barra8771
@barra8771 3 жыл бұрын
@@chelmswoodjunction thank you Peter. At 56 I am knew to model railway.OO gauge on a 6x4 board is my plan. Should get started in April, all going well. Barra.
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
@@barra8771 hi barra you are never to old to start in the hobby. peter
@simp-sons2354
@simp-sons2354 6 ай бұрын
Best explain
@chelmswoodjunction
@chelmswoodjunction 6 ай бұрын
Hello Thank you for the kind comments. peter
@chrispicard3404
@chrispicard3404 3 жыл бұрын
How do you connect the wire from the lights to the main power?
@chelmswoodjunction
@chelmswoodjunction 3 жыл бұрын
Hi chris The wire from the lights go to one of the positive blocks and the other to the negative and the block itself is powered by a 12 volt multi voltage adapter plug set at 3 volts for the lights. Hope this helps. Peter
@kendrawatkins8290
@kendrawatkins8290 Жыл бұрын
i have 3 volt supply do I still need resistor and if so what size
@chelmswoodjunction
@chelmswoodjunction Жыл бұрын
Hi kendra If the power supply is 3 volts and the items you wire into the terminal blocks are 3 volt then they will be fine without resistors but if the plug voltage is higher than the item i would consult with the manufacturer for resistor size. Hope this helps. Peter
26. Wiring LED lights to your Layout or Diorama
9:33
Donegal Dad-Rail
Рет қаралды 32 М.
Layout LIGHTING on your Model Railroad! - N Scale
11:45
Nscaler454
Рет қаралды 5 М.
The selfish The Joker was taught a lesson by Officer Rabbit. #funny #supersiblings
00:12
Funny superhero siblings
Рет қаралды 11 МЛН
REAL 3D brush can draw grass Life Hack #shorts #lifehacks
00:42
MrMaximus
Рет қаралды 6 МЛН
😜 #aminkavitaminka #aminokka #аминкавитаминка
00:14
Аминка Витаминка
Рет қаралды 419 М.
Light Up Your Structures With LEDs (93)
14:02
Model Railroading
Рет қаралды 31 М.
Fitting Platform Lighting. Hornby Triang & All Brands.
13:27
Johns Amazing Trains - chambs123
Рет қаралды 38 М.
HOW TO ADD LIGHTING TO YOUR OO GAUGE MODEL RAILWAY
16:18
Piccadilly Sidings OO Gauge Model Railway
Рет қаралды 13 М.
How To Wire PECO UNIFROG POINTS - Model Railway Tutorial
14:28
That Model Railway Guy
Рет қаралды 21 М.
Which Splicing Device is Best?  Push Ins Vs. Wago Vs. Wirenuts
13:06
How To Home
Рет қаралды 1,4 МЛН
Terminal Blocks for model railway wiring at Chadwick Model Railway | 85.
17:41
Chadwick Model Railway
Рет қаралды 107 М.
#46 - Easy wiring for lights etc  and layout update
15:36
LeisureWorld Model Railway
Рет қаралды 10 М.
How does DCC Work and how do I wire my Model Railroad for it?
15:09
DIY and Digital Railroad
Рет қаралды 158 М.
How to wire up Kytes lights and model railway lights.
11:04
Paul Briden
Рет қаралды 11 М.