L200 Suspension Leaf Spring and shackle bush Replacement

[@diydaly]

New Milners Leaf spring kit Ebay - ebay.us/hK8kmh Leaf spring hanger bracket / shocker mount - ebay.us/yHcqin Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site) Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site) Tools : Socket set - amzn.to/3eGx2Ak Dewalt 3/8 impact driver - amzn.to/3njemLY Spanner set - amzn.to/3gteqpG MAP Gas Burner torch - ebay.us/8uw93o MAP Gas bottle - ebay.us/xr89cu Copper hammer - ebay.us/GbuTjZ Punch set - amzn.to/3gp7Cuv Oxy acetilene setup - ebay.us/mNMJ4Y Air Chisel - ebay.us/O69p82 Compressor - ebay.us/rrvsAC Vertical Jack - ebay.us/nAThQv Deblock oil / Penetrating oil - ebay.us/KVNVyQ copper grease - ebay.us/J3gm1u 1/2" Impact driver - ebay.us/YBBmKq Mains grinder - ebay.us/KknEnW Mechanics flat head Battery grinder - ebay.us/4Luw6R Wire brush - ebay.us/38nQvQ Hammer - ebay.us/X74Reh 1/2" breaker bar - ebay.us/N9jx3l Check out my other L200 Videos : Rear prop UJ replacement - kzbin.info/www/bejne/m2TTZ2SvoaeGnJI

[@simonignatius3284]

Thank you for this video, I had been having loud knocking and screeching sounds with my triton when its moving or turning, took them a while to identify that the sounds were coming from this area of the truck(after spending so much money changing other parts), now I sort of have an idea of what needs to be done, will proceed and fix this and test out to see if the sounds disappear.

[@diydaly]

Thanks for the comment, hopefully this job sorts your noise out!

[@sandroscavino9962]

Good Hi guys, can you tell me if the Leaf spring and shocks can be fitted on Starwagon L300 1991 4x4 ? I know most of the parts fit well on it. Thanks

[@diydaly]

Im really not sure to be honest mate, will try find out for you

[@sandroscavino9962]

@@diydaly Thanks you mate, it's very kind 🙏

[@seanhammon6639]

Thanks. Why were they replaced?

[@diydaly]

Just for a HD upgrade 👍

[@prohkunz]

Dont you have to put the load of the car on the leaf springs first and THEN torque the shackle bolt/nut properly?

[@diydaly]

Some people may do mate .. different opinions .. I rarely do

[@prohkunz]

@@diydaly I was just curious whether it made any difference. Thanks.

[@diydaly]

@@prohkunz 👍

[@grazrat3]

torque settings for the bolts?

[@diydaly]

I couldn't seem to find the torque settings Andy, they weren't listed in autodata.

[@hog8035]

Final tightening should be done when vehicle is bearing its own weight. 150 Newton Meters front Rear 52 U bolts 80

[@diydaly]

👍 thanks

[@brianregan4503]

no spec. settings for suspension parts,...final tightening should have been done with vehicle on ground ,suspension taking full load

[@diydaly]

Thanks for the comment

[@jamesmears6493]

whats the reason for changing them?

[@diydaly]

1 was broken

[@filipemarques-k8p]

English please😂😂😂