La Trokita Roja Gets 2” Blocks 4/10 Drop + Cutting my Bed for Tubs

Follow me on instagram @1clean_Silverado

[@benitobanuelos1912]

did you fully cut the crossmember where it holds the gas tank or did you just notch it for clearance

[@Legendaryyy]

Good shit bro! Just subscribed!🤘🏽

[@jeffreyolivas]

La Guera bet g 🔥new videos coming this week

[@Santiagosanchez-ej6tc]

Hey bro would you say the 1” drop springs was exactly 1 inch? I wanna go from 4 to 5 inches in the front. I don’t want it to rub so I hope it’s exactly an inch or a little less

[@jeffreyolivas]

Yes bro it’s about 1 inch or less it’s barely noticeable

[@dylanb7003]

What’s the song called when you were showing the white truck ?

[@kennethvazquez7966]

Cumbia calejera

[@trevortysinger8434]

Where did you order the drop blocks ,mine won’t line up right and it ends up being offset from the axel flip kit

[@jeffreyolivas]

Got mine of ebay, look up in there

[@chris.lowhoe7417]

Sick

[@jeffreyolivas]

Thanks bro💯🔥

[@sasukeuchiha-uh4ne]

Wondering if you could help me with this I lowered mine for 9 inch in the back but my driver side tire is rubbing through the plastic to the fuse box wiring harness how to fix it if you got any ideas

[@jeffreyolivas]

How low are you on the front?

[@josevilleda4739]

my truck on a 4/8 and i put 2in drop blocks to make it to a 4/10 and my cross member was hitting my drive shaft

[@jeffreyolivas]

Urs a exteded cab or single cab? Mine was a single cab and i just cut the crossmember for the gas tank and i was good

[@lsxleo1182]

2:20 , what’s dat on top of the block , where’d u get it ? it’s in between the diff and the block , it’s like wrapped in the diff

[@jeffreyolivas]

Thats part of my drop kit bro thats how they come from DJM

[@CarlosRuiz-pq3zs]

Can you send me measure of where you cut the bed for the notch?

[@jeffreyolivas]

I dont have the truck no more

[@squadhd5661]

1:20 what's the name of the song and u guys have some clean trucks

[@jeffreyolivas]

Thanks g & its called El ferrocarril slowed version

[@squadhd5661]

No problem g , but that's not the song bro

[@jvjrangel]

Did you have to go with a 2 piece drive shaft?

[@jeffreyolivas]

Negative one piece

[@luisangelgarcia3553]

hey bro When you dropped your truck did you move the gas tank to another part or u just leave it where it originally was?

[@jeffreyolivas]

I never did anything to the tank bro but i was planning on lifitng it up 2” inches

[@luisangelgarcia3553]

@@jeffreyolivas thanks bro is that i wanna drop my truck 10 inches but my brother said va a pegar el tanque en piso something like that but thank u bro

[@jeffreyolivas]

@@luisangelgarcia3553 yeah bro it is gona scrape but it aint too bad tbh

[@luisangelgarcia3553]

@@jeffreyolivas alrrr thank u bro

[@Eric-hm6qr]

Where did you get your lowering blocks and do you have the link?

[@jeffreyolivas]

On ebay bro the link dont exist no more

[@eduardomulato9725]

i want a 4/8 drop on 22s do i have to cut my bed? 04 chevy

[@jeffreyolivas]

Na u good bro

[@ElChristoYT]

how did you fix your pinion angle on the differential

[@jeffreyolivas]

Dint have a issue with that tbh

[@1low_stepside]

Rip to the tank 🤦🏽‍♂️

[@jeffreyolivas]

Never had a problem with the tank⚡️🥱

[@jtx2144]

Does anyone know where I can get something lower than a 5/7 drop kit?

[@benjaminmunoz9990]

I’d buy a 5/7 drop kit bro and then add blocks after in order to go lower

[@aydengoldsberry5721]

I’m sitting at a 5/8 drop on my extended cab rn but I have a rear rake nothing too crazy but I’m thinking I wanna go to a 9” drop in the back should I just buy 1” drop blocks or 1/4” it’s nothing too crazy but idk

[@chevydito]

So you cut your crossmember. Also bro, did you fix your pinion angle ? Cause it has to be in a certain angle to operate correctly if not it’ll fuck your tranny seal up, needs to be at a certain degree, just tryna find out if you did, if so how, I put pinion angle shims but didn’t mean too much , I’m at 10in in the back

[@menacenavarro6470]

Did you rub on the crossmember I’m rubbing

[@luxurnathan4353]

Did you cut or rolled for the back so it won’t rub?

[@jeffreyolivas]

I cut little slits on the inner part of the quarterpanel and then once they were cut i hit them with a rubber mallet to make it almost flat bro and then once that was done i was good but if you are on low pros u should be good

[@peluche201]

Algún día tendré una troca así roja,chaparrita y chingona

[@jeffreyolivas]

Todo se puede 🔥

[@jesusshinojosaa]

Ya la tienes carnal ?

[@alexurquizaa3939]

What are the wheels on the white truck? 👍

[@jeffreyolivas]

24” Escalade Rep wheels bro

[@ericsandoval3016]

Do you have a link for the drop blocks bro?

[@jeffreyolivas]

There it is g www.amazon.com/Suspension-Solid-Blocks-Square-Spring/dp/B017JF5PHQ/ref=mp_s_a_1_6?dchild=1&keywords=lift+blocks&qid=1609466493&sr=8-6

[@ericsandoval3016]

@@jeffreyolivas appreciate it bro

[@fitcardYT]

I don’t get it if it says lift how would that lower 2 inches if it says lift 2 inches

[@juliancastillo2844]

Donde puedo conseguir Los lowering blocks bro 💯🔥

[@jeffreyolivas]

Yo los compre en Ebay bro

[@juliancastillo2844]

La Trokita Roja como Los puedo buscar en eBay bro ? Son universal

[@rosalioalvarado8564]

Saludos desde Chicago

[@jeffreyolivas]

Saludos primo🔥🔥

[@alfonsogarcia3626]

Where did u buy the blocks and how much cuhh?

[@jeffreyolivas]

Got them on ebay bro i belive $50 bucks with everything needed

[@nbscarloslsx]

What wing is that on the red truck

[@jeffreyolivas]

Cresspo wing

[@Low-bp6xt]

do you need flip kit before adding drop blocks

[@jeffreyolivas]

Yeah bro because the u bolts are longer and the plate

[@The1971chevy]

Fallowing saludos desde Lexington Nebraska

[@jeffreyolivas]

Saludos primo

[@menacenavarro6470]

Did you rub on the crossmember I’m rubbing bad

[@jeffreyolivas]

It all depends on the size wheels bro if u runnning 24s u gona rub bad since ur pitting the shaft closer to the crossmember. When i was on 17s it was perfect but then on 22s i did rub more. I suggest notching the crossmembers bro

[@jeffreyolivas]

It all depends on the size wheels bro if u runnning 24s u gona rub bad since ur pitting the shaft closer to the crossmember. When i was on 17s it was perfect but then on 22s i did rub more. I suggest notching the crossmembers bro

[@chrisduarte4299]

Ur on monster notch bro I got a under bed would it’ still work?

[@jeffreyolivas]

No bro it wouldnt work

[@eddieluna8202]

Do you have drop shackles on this truck

[@jeffreyolivas]

Yess 2” shackles

[@JustABlackTacoma]

Hey bro how you running a 4inch drop upfront with 17s ?

[@jeffreyolivas]

I was dropped on control arms bro with stock spindles

[@JustABlackTacoma]

Oo I see bro because I have a 3/8 but when I wanna put my spindles it hits with 17s I’m wanting a 5/8

[@jeffreyolivas]

@@JustABlackTacoma go back to stock spindles & run control arms & springs

[@diegomon5056]

Quick question bro how much do you be hitting your frame now😂?

[@jeffreyolivas]

Like scraping bro?

[@diegomon5056]

@@jeffreyolivas yeah

[@Grillinwithaj]

Are you going to put airbags on the truck cuh

[@jeffreyolivas]

Sold the truck like 1 year and half ago

[@raulvega9333]

Patrick star?

[@jeffreyolivas]

Yes sir live in action

[@JuanReyes-lw6iv]

Does the drive line hit the frame?

[@jeffreyolivas]

No sirrrri i cut the crossmember that holds the gas tank and i was fine

[@wubzzy]

what tire size you running bro

[@jeffreyolivas]

Honestly cant remember man its been too long

[@albertdiaz1496]

Where’d you get your blocks from bro ? Link?

[@jeffreyolivas]

www.ebay.com/itm/264685174423

[@jeffreyolivas]

Albert Diaz that’s what i got bro

[@foldingchair9545]

@@jeffreyolivas u have new link?

[@The1971chevy]

What tire size you running on the stock steels right now

[@jeffreyolivas]

On front 275/70/17 and rear 265/55/17

[@Error343434]

La Trokita Roja does it rub in the front?

[@jeffreyolivas]

Kaspar40oz not at all bro

[@Error343434]

La Trokita Roja do u have mini tubs or rolled fender?

[@jeffreyolivas]

Kaspar40oz full tubs with fenders rolled as well

[@TonyLopez-ww7ko]

What drop shocks bro for rear for that drop what do I need

[@jeffreyolivas]

You need a flip kit, Shackles, 2” blocks That will put you at a 10” drop

[@TonyLopez-ww7ko]

@@jeffreyolivas can you tell me what shocks would I need could I use my stocks bro

[@jeffreyolivas]

@@TonyLopez-ww7ko u need belltech shocks bro look them up

[@Superspeeeed]

@@jeffreyolivas which part #

[@cristianSanchez-ln6pu]

Ay bro how did you go from 4 in the front to 5? I wanna go from a 4/9 to a 5/9

[@jeffreyolivas]

I added 1 inch drop springs i was on oem ones

[@cristianSanchez-ln6pu]

@@jeffreyolivas Thanks bro. And where did you get the lowering ones from? Or what brand are they?

[@jeffreyolivas]

@@cristianSanchez-ln6pu honestly they were ebay brand bro but they rode good tbh not bad at all i had belltech shocks with them as well

[@cristianSanchez-ln6pu]

@@jeffreyolivas can you send the link bro?

[@jeffreyolivas]

@@cristianSanchez-ln6pu there it is bro ---> www.ebay.com/itm/392613045819

[@edwincampos2314]

What size are the u bolts bro ?

[@jeffreyolivas]

Honestly cant remember bro they came in the kit with the Drop blocks

[@ramonguerrero9359]

Monster notch or underbed notch?

[@jeffreyolivas]

Monster notch

[@ramonguerrero9359]

@@jeffreyolivas i got a extended cab bro, I was wondering what’s better having, the 2 bars or single bar ?

[@jeffreyolivas]

@@ramonguerrero9359 2 bars bro for sure

[@troydreams2742]

V6 gang or V8?

[@jeffreyolivas]

V8 bro

[@sergioramirez5417]

Esta.n chingonas

[@jeffreyolivas]

Gracias primo🙏🙏🙏

[@sergioramirez5417]

Hey primo. Aver cuando areglas mi troka. 2003 chevy silverado

[@jeffreyolivas]

@@sergioramirez5417 que tiene? Hmu on insta @strictly_statik