LabVIEW Tutorial - Data Acquisition

[@ahmad....5962]

Thank you so much... it is really an easy explaination with understandable language...

[@mailtomigara]

fantastic i never thought it is so easy..........

[@liljaker]

Great video Dr Anas, your videos are very helpful, Keep it up, A link to order the DAQ would be appreciated, thanks

[@ivankudrenko9340]

Very useful, thank you!

[@naseerhaboubi165]

السلام عليكم لدي daq ni-6009 وارغب بقراءة درجة الحرارة من خلال ثرموكبل حاولت ولم اتمكن هل يجب اضافة مكبر ad595 على سبيل المثال مع جزيل الشكر

[@emreaydeniz8801]

Thanks for video. But I have a problem. I used your matlab code. When I rotate the potatiometer, the value chaneged 0 to 0.9 between. I used daqnavi 1710HG. It's support to analog and digital process. Do you have a recommend ?

[@gro5757]

Thanks for his well thought out video. Please I keep confusing the concept of selecting a sampling rate during analogue to digital conversion with sampling rate feature on the DAQ assistant configuration palette . do we need to consider the Nyquist Theory while deciding the sampling rate on the DAQ assistant just like in A to D conversion. Please share your thoughts on this. Thanks

[@michaelmeisman1672]

I am aware this is an old video. I am using the NI cDAQ-9174 with the NI 9214 Thermocouple input module. Can you help with that?

[@sakshimehta2091]

hey, I have an arduino board(standard UNO). I need to diaplay the data acquired by the arduino on a labview setup. Can i do this without the interfacing unit ? will the labview system be able to read the data that is coming in serially from the arduino?

[@SuperZlatev]

Hey i am trying to measure temperature with thermocouples using a homemade DAQ hardware? Will it work with Lab View without drivers?

[@kristiandame6988]

Great, can you give tutorial about labview with arduino?

[@AnasKuzechie]

I did this video more than a decade ago when I had the hardware and the software. Thanks for the feedback.

[@izzamizmawie2516]

does we need to install driver first for DAQ or it just plug and play

[@jamieyeap91]

Hi there, may I know how do I get the DAQ Assistant appear on the express VI Function panel?

[@tejashyamgopal]

www.ni.com/download/ni-daqmx-14.2/5046/en/

[@medaviss]

thank you

[@Al3aqrabChannel]

great Video Dr.Anas BTW, i uploaded 2 videos for Labview

[@arduinomaquinas]

Like 618 👏👏👏👏👏

[@mailtomigara]

very usefull..............

[@alibehrouz9833]

my regard for you

[@irhoumahmiftah2430]

merci pour

[@jeff8794]

Your video does not include a hardware diagram or a schematic for the circuit you're showing. Not a good practice when trying to demonstrate or teach. Even if you components are simply, you should all way provide a guide to show how their physically connected, i.e., anode versus cathode for the LED, where wires are connected for potentiometer, where wires connect at NI USB-6008, etc.

[@AnasKuzechie]

Thanks for your feedback. I did this tutorial 10 years ago, and I was new to KZbin tutorials. If you checkout my recent tutorials, you’ll see everything is well documented. Thanks again.

[@jeff8794]

@@AnasKuzechie I didn't notice the date. Do you remember how you had everything connected. I need to start working with NI DAQ at work and thought this would be a good start.

[@AnasKuzechie]

@@jeff8794 I can add link in the description to circuit diagram

[@AnasKuzechie]

@@jeff8794 I can add link in the description to circuit diagram

[@AnasKuzechie]

@@jeff8794 You can find a link in the description to access the circuit diagram. Again, thanks for your feedback.