CDHPOWER Flex Fit Poo Poo

[@HighTreason610]

The torque bites in just a little harder once it gets rolling, eh? Mounting it the way you did is probably better for use on trails anyway, less likely to be hit by a stray twig or stone. For road use I rather liked having it mounted from a spare chain tensioner, that tensioner being upside down with a bolt through where the idler wheel would be so that the chamber and silencer were sat below the left chainstay. Definitely not the ultimate all-round pipe and the elitists will probably tell you countless things are wrong with it, but for the price it can be found at it's certainly not terrible - besides, throwing stacks of cash at these bikes almost seems to defy the object, one of their main appeals is their relatively low cost and simplicity; cobble it together and go, then mess with it, break it at least once, fix it and overall have fun without the need to sell a kidney.

[@LAHover]

Well said, and good point about mounting for both style of builds!

[@ericwheeler2733]

@@LAHover hey what's ur discord server #?

[@LAHover]

@@ericwheeler2733 LA Hover#1036

[@LAHover]

Server invite discord.gg/mTD5267p

[@johnryan7396]

I love that you test your builds and mods out on trails instead of like most guys who ride in parking lots or perfectly paved roads.

[@kevinmeahan4603]

I ride alot at night. But like I mentioned before. The officer that is always on duty at night. Him and I was the only one that was out on the highway a couple of nights ago. One officer that had stopped me several months ago said my lights have to be hard mounted and shine 500 feet. So I went and bought 2 night lights that shine 762 feet. Haven't been stopped by him since. I'm grateful to have about five miles of highway I can ride and perty much flat. Have a great day. I'm getting ready to go ride my bikes. Sounds like definitely a missfire. Please keep the great videos coming.

[@marcs4091]

I have one of those on a 79cc 4 stroke. Didn't do anything for performance. But omg made it sound so much better (much deeper tone) and a lot quieter. Also no more backfiring. I also put an exhaust wrap that made it even quieter.

[@engineguyrojo6893]

I have a 49cc 4 stroke and its a complete riper

[@marcs4091]

@@engineguyrojo6893, hey just curious, what is your top speed with one of those on flat ground? Trying to figure out what my next kit is going to be 79cc Predator or 49cc HS. The 79cc I'm referring to is actually a Phatmoto. I can't seem to get this thing to go any faster than 37 miles per hour on flat ground. Wondering if the 79cc is really any better than the 49cc. I know that those 49 cc can be run wide open all day long without any problems. And they rev a lot higher. The 79cc can handle it but you're kind of pressing your luck a little bit.

[@midnightangel4129]

Me 53cc

[@jorelldye4346]

4 stroke bikes do not benefit much at all from changing the exhaust. 2 stroke engines work very differently, and having a less restrictive exhaust makes a massive difference.

[@onway78]

Can you help me if you can I try starting mine up for the first time with the choke open wide soon as I close the chuk it shuts right off but it started fine

[@panzerwolf494]

I put one of these on my trike a while back and it really improved the motor. More torque in lower ranges, steadier run, easier to start, I have a larger bore motor and it really lets the engine shine. Since then I've added an exhaust tip that gives it a deeper sound

[@clutch6654]

"Grabbing more power" is called the power band" THAT'S the HAPPY SPOT,

[@LAHover]

lol, well her happy spot is too dang high for this build :P ... Wonder if we can get it a bit lower? I'm guessing I'd need the MZ pipe to get the mid and high tune?

[@clutch6654]

@@LAHover the "knock " you are getting is probably from lugging. It is not good. A 2 stroke "likes" to be IN the power band. Go out and ride a 2 stroke dirt bike. It will take off and (lugging) run for a second till it hits the power band, then take off like a shot. That's the brraapp,braapp sound you hear in each gear. It's suppose to sound like that. If you want to hit the power band sooner, probly have to put an even larger sprocket on it.

[@LAHover]

​@Andrew Schwab I would if I could. This 56 tooth is the biggest I could fit on this frame... and it was a hard fit at that.

[@ANU1DRY]

I’m usually not one to leave comments but I have to say that your builds are amazing. I can only pray that my build could withstand half the punishment that you put yours through. Great work man.

[@LAHover]

Thanks! Good luck on yours.

[@michalkosuth8930]

I installed this exhaust pipe for my Azrael today. It has a beautiful deep sound, I love it. And yes, it is loud. And I love it.

[@youngone697]

HOW AMAZING YOU GOT TO RIDE THAT BICYCLE IN THE FOREST WITH ABSOLUTELY NO DIRTBIKE SUSPENSION AND DIDNT END UP BREAKING THAT BICYCLE FRAME. THE OTHER THING IT'S AMAZING HOW THE ENGINE DIDN'T COME LOOSE OR THE CHAIN TENSIONER DIDN'T FLY OFF CAUSE THAT'S WHAT NORMALLY HAPPENS TO THEM CHEAP CHAIN TENSIONER ON REGULAR ROADS. GOOD JOB HANDLING THAT BIKE IN THAT DIRT.

[@pewpewbbqs]

I have this same motor that I'm installing tomorrow. Been watching your videos to prepare. Thank you bro. Love all your videos, bikes n guns 4 life haha

[@erican442]

I was having the backfiring or four stroking at full throttle on my 2-stroke. What I found was that the carburetor float needs to be level to work right looking at your bike it looks like your carburetor is jacked up like mine was to where the floats not working right try leveling your carburetor by tipping the motor back some. See if that helps out but I had the same problem with it misfiring at Full Throttle or high RPMs. Good luck and as always enjoy your videos. Let me know how it works out.

[@robbyclark6915]

My YD100 came with two base gaskets from the factory and it remains that way to this day, 7 months later. And mine too can be a little b. to get started. It’s been that way from day one. I also hate the “ lurching “ it does at low speeds! Very choppy and jerky feeling, although it is better since I modified the exhaust by just removing the entire baffle, end cap and all. Also really boosted the torque which was already above average and now is almost scary lol. Also put a hp carburetor on mine which has aided performance and helped kind of smooth it out as well as just increased overall responsiveness from the engine.

[@johnbrevard5966]

WWOW!!.. Love it... and nice setup overall.....These motors and all accessories are the meaning of affordable fun,,, well, somewhat affordable.

[@PlayingWithFireOutdoors]

Thanks man I was pondering about one. And it sounds pretty close to mine.

[@jaayse]

Thanks for this exhaust review.. I always worry about buying these on BikeBerry, SickBikeParts, and Amazon because people complain about these being expensive and also having a tendency to have low quality welds, not fit at all, or have any consistency in manufacturing.. I gotta say, out of all the aftermarket exhausts, even the ones that have the expansion and silencer at the end, nothing is ever quieter and more reliable out-of-the-box than the stock muffler.. I'd really consider purchasing a 40$-70$ exhaust if there were some manufacturer with decent QC that also makes silenced exhaust pipes with everything reliably welded from the get-go..

[@kenjuicekrajewski9577]

I race 250 and 500 cc dirtbikes and You can def. Hear. It wants to come on the pipe at higher rpm. Because of price I'm gonna get one just to have for a spare. Great video as always

[@Drz_noah470]

it sounds like its running lean, make sure you dont have any vacuum leaks, check spark plug every so often to see how it looks, it its white or grey its running lean or if its black its running very rich. a tanish brown color on the end of the plug is desired. i have a chart of how to read sparks plugs,i can send it to you on facebook if wanted

[@LAHover]

Plug looks dry but slightly black. I like running rich on the trail bikes for heat issues (slower bike, not allot of air cooling), but shoot that chart over to "LA Hover" on facebook :) thanks!

[@echangwang1821]

I've gotta say, the coolest part about this muffler is how the power kicks in when you start going. It starts off slow, but then speeds up dramatically as you go.

[@larryshaver3568]

I'M GLAD you mentioned starting that was very hard i'll think twice about getting a pk80

[@LAHover]

Oh on this bike it's only because I was using the big 56t sprocket. The stock 44t (or smaller) is much easier to start. :) ... Not motor specific.

[@stephenbroderick8710]

That trail is nice and it looks like your going faster than 25 ish? Where did you get that flex hose exhaust pipe? I just had to use map pro gas to heat and bend my banana expansion chamber exhaust pipe to line up which I procrastinated forever but it was actually pretty easy after it got red. It was too loud / popping, sound wise and wouldn’t stay running even though I adjusted the idle screw on my 49 cc. It actually was running slower after I got it on so I figured it needed some back pressure. I ended up map gassing the factory exhaust straight at the pipe and using a grinder to cut about 4”s off the muffler with the cap off. Then I jb welded the cap back on with a double female / bigger pipe connecting it to my new exhaust. Now it’s faster. I drilled 2 holes in the cap to give it more output. Any ideas on what I can do to maximize performance between the carburetor pin setting and the idle? You said you lowered the pin setting for more reliably so if you raise it will that make it run hotter but faster?

[@matts.996]

Wow that pipe makes a really unique noise when paired with that big bore 50mm motor

[@awdrifter3394]

But all "tuning" the pipe means is just calculating the volume of the expansion chamber and see how far it should be from the engine with your engine size. Seems like most straight expansion chamber for these bike kits are much closer to the engine, so maybe shorter flex pipe would give you more power?

[@whatsyurprob158]

California Motorbikes WIlcat Minarelli ULTRA on a Switz Cruiser for me. Building it right now, and, I went with the FMF Turbine 2, and now all I have to do is mount it to the EC & bike. Suggestions for an already made bracket I can attach to the Cruiser would be nice. This sure is a 😎 experience. 🇺🇸

[@Simplyme0u7]

🔥🔥🔥🔥🔥🔥This is the coolest video ever

[@armandasm3810]

how did you tighten the ngk sparplug? it has a bigger diameter and the tools dont fit while putting it in the yd100

[@LAHover]

My kit came with a dual size socket, but you may need to take a trip to the auto parts store.

[@dave-oc6xk]

I JUST CUT THE TOP OFF MY YD100 AND DRILLED OUT THE HOLES ON A HIGH COMP HEAD AND GOT IT TO FIT ITS A BEAST YOU SHOULD TRY IT

[@LAHover]

Sweet man! Throw of a quick video of that if you can, I'l love to see it.

[@dave-oc6xk]

@@LAHover i dont really like the yd100 cranks, they vibrate over 45mph, ive got a 32 tooth sprocket and it pulls it just fine, im actually about to go to a 28 tooth sprocket because it runs out of gearon the top end

[@LAHover]

Hopefully someone will start making aftermarket parts for these motors. But given the fact that you can get a big bore kit for the 66cc motors I'm not sure if anyone will bother to to it any time soon.

[@QuinnCsVideos]

I'm going to weld this up to a phantom 85. Loves how it goes pap pap pap!

[@kevinmeahan4603]

I took the end peice off my stock exhaust and it actually lost a little power. Oh yeah 80 cc. 44 tooth sprocket. Put it back on. And had more power back. Just thought I'd try it. Was definitely louder. So in my neighborhood it's not worth pissing off my neighbors. But it was fun trying it

[@kevinmeahan4603]

I enjoyed the popping of having the end cap off. But like you said. Not worth pissing off the neighbors.

[@aliahmed-pt2xt]

I did that and it didnt start after that

[@Sharker2468]

i had misfire issues and mitigated it substantially by using 87 octane instead of a higher octance fuel (first gallon was 93 accidental) for easier combustion but if your issue is knock and not misfire this could be detrimental to your motor as you likely know

[@joshrules123456]

This is a very deep subject depending on alot of factors, every one I've ran has pinged on anything less than 90. However, if you are using a heavy amount of non synthetic oil and take it easy (around half throttle), you get alot better bottom end for tight trails, but start pinging horribly as soon as you open it up.

[@ernestoarizpe5506]

Pipe should point down to avoid oil buildup

[@LAHover]

Good point, thanks.

[@Spodeboy]

The flex part of the exhaust looks like a steel braided hose. What is on the inside? Rubber? If it is rubber, it will crack due to heat. I think you are getting improved lower end power due to the length of the flex part of the exhaust. The tuned exhaust on a 2 stroke is like a trombone. If the trombone slide is moved so the air path is longest, then it will create a low note. Conversely, if the slide is shortened, then it will create a higher note. For a 2 stroke engine, if it is a long distance from the cylinder to the expansion chamber, then it tends to create better back pressure in the lower end which results in better low end power. If the expansion chamber is close to the cylinder, then top end power will improve. If you look at the pictures of an 80cc 2 stroke dirt bike versus a 500cc, you can see how short the exhaust is on the 80cc and how long it is on the 500 cc.

[@LAHover]

Thanks for the info :) The inside of the flex pipe is a corrugated steel pipe... Which I'm sure it terrible for exhaust tuning lol.

[@Spodeboy]

@@LAHover Thanks for the info as well!

[@robertkgunn]

I have this pipe from bicycle-engines. It makes a difference running it up vs straight or down. For me I like it straight down the side with a slight angle down. Keeps oil buildup away. I bet you have a puddle of oil in the line? For me on a Zeda 100 max I immediately noticed a large difference compared to stock exhaust. A ton more low/ mid torque. Also quite a bit snappier. I happen to like the sound difference too. I think it’s a great upgrade. I didn’t need jb weld though lol. Do you know if all the flex pipes sold are the same brand? Or are they just similar in looks. I’ve noticed some come in different colors as well. Maybe the internals are slightly different depending on who you buy from? I know this is an older video but I still watch them all. I should probably sub for as many times as I watch your videos 😂 I’m going to do that now. Hope to see more videos coming out

[@Kaw-rasu]

I wonder where I could buy just the flexible portion, to bring my own muffler?

[@dannyoutlaw8001]

Hey brother something that helps those carbs a lot is to put a good air filter on it and put a smaller main jet go to a 65-68 anywhere in that area it will run sooo much better if you think it pulls now brother you in for a treat ...and it's very cheap a jet pack is less than 10 bucks ...the Jets are 5mm threads ...when you were at full throttle and it went clean and started pulling it was the chamber finally working ...lean the jet down and it will be like that all time and it's even better on the engine more efficient...

[@Noonanator91]

I can get my yd100 to 7400rpm on a 65 jet. Just under 350 degrees.

[@dannyoutlaw8001]

@@Noonanator91 Hey brother how fast have you had yours iv heard they put up some good numbers...iv really been wanting to buy one my little 66 runs great it's been 48mph on a 36 gear but I want more power down low like La says his is...

[@Noonanator91]

34.66 mph today. 36 tooth sprocket. No mods yet just tried jetting.

[@simabasargin4842]

What are some ways you can prepare a band new engine before installing it completely ?

[@LAHover]

Here is a check list of tools and points I look over on a bike kzbin.info/www/bejne/j2mseoWKnaqGi9k And here is a full build that covers most of the less talked about things. kzbin.info/www/bejne/oWiao6SYi9yHb7c

[@number4861]

Add a bit of oil through the spark plug hole

[@simabasargin4842]

Thanks guys

[@YorHighness]

Outstanding scenary

[@radiowavz]

Grate video keep up the good work. Keep making them.

[@g4bbn149]

Ahh the wonderful 2 stroke power band😌

[@kullcraven]

Hello man, so you are riding on trails which i am riding on, but for less hassle im going to down grade to a 50cc 2 stroke engine. I have front shocks but man my bike shakes the crap out of me over rocks and such, the spring shaft seat a huge relief for this?

[@evanford3135]

What's up hover fellow Louisiana boy (Bossier City)here just finished building and breaking in a hyper cruiser with zeda triple 40 ported and skirted ,f2 exhaust it's so much fun I've hit 47 mph on it it's a blast. Just wonder what Jets you run when you start at 40 : 1?

[@mtbalot]

hell yeah way to ride ! waaaaahooo let er rip ! what a BLAST

[@joshuaperales938]

I like your voice it's very calming to me for some reason

[@chensworld2719]

for u guys that want to buy an exhaust like that u should defenetly buy one, at high and low rpm they gain a lott of power and not from nowhere it's just their happy spot where I I usually choose for, and nope I already took my 2 stroke into some really high rpm and I got 80 kmh and I checked my piston it was all fine and perfect just need some full synthetic oil.

[@race-all]

The flex pipes that I've used way back in da day did not last. They either had like a rubber inside or thin metal so it would flex. In either case they don't last. Once it wears away inside that steel braided covering does not hold in the exhaust. The steel braid is to protect the metal or rubber on the inside. Even on cars I've seen the flex pipes blow out after a while. I guess if you don't mind getting a flex pipe every so often then it's cool. That power gain you feel is when the engine is coming into it's power band. That is what you want. It sounds like the bike is bogging to me until it hits it's power band or sweet spot. I bet if you lowered the gearing you would come into the power band sooner & it would have even a much easier time going through those trails. I don't think your that type of rider though. Most two stroke riders like an aggressive type of ride out of there bike or motorcycle. I don't know if you have done plug checks. That is the first thing I do to every two stroke I've had. Not sure if you know how to do that . I usually run it wide open at top speed, cut off the ignition while wide open, then pull in the clutch. Take out the plug & read it. This way you would not be guessing at what plug heat range to run & to know to go richer or leaner on your fuel mix & carb adjustment. Myself I like a snappy two stroke rev. Ride on , like your video's.

[@race-all]

Forgot to add, on the plug check use a new plug.

[@williamdoire6853]

I put octane boost in my bike and stoped pinging mostly. Only pinged when cold but now boggs alittle at top end i may try adding exzhast flow seeing if that helps in little steps. I also have a car spark plug wire that seemed to make it fire better aswell. Sorry have no clue what motor is its third hand and sat in a shed for cupple years. Goes good for the most part shaky rims tho hahaha

[@peytonfrazier-ub6bd]

My yd100 is currently only running on 1 ring on the piston cause it blew up but I got another motor kit on the way

[@matts.996]

I have this exhaust. It’s a good pipe for High end power but low end is Garbo

[@mice1m1]

My pipe is tuned for torque. 35inches from flange to end of chamber . power up high is a short pipe. lower the band add an inch to the header. 4 stroking at full throttle is rich or long pipe How long your pipe? flange to end of chamber

[@CELERYLAWN]

It’s interesting just bought my self a cheaper option of the poopoo pipe off amazon for about 50 w/shipping and I notice that my expansion chamber and silencer are a bit smaller. Just for anyone to reference, or even a heads up, and might want to pay a little more for the extra size of expansion and silencer. Trying my hardest at the moment to get over 30mph

[@ZeldaNumber17]

i've used hose clamps to mount both of my bendy pipes. like you said there's really no better way to do it.

[@nazzytpr]

Maybe welding?

[@ADumbFox1379]

My friend just got the same one lol he said it gives him more power

[@dr.weaver6011]

My chinadoll was making that exact same sound during break in near full throttle. Have you found out what it was?

[@ericmcginnis9413]

It sounded better at the higher rpm too! I know you don't like to hold it wide open but that engine seemed to have liked it! What I want to know is does this engine offer enough benefit to justify its added cost over the 80 cc engines?

[@LAHover]

IMO yes. The low end and mid rang pull is strong and worth the $... That being said, I can't speak on reliability, only time will tell.

[@matthewsteva368]

also if you try to modified red plastic on your carb find a way make it breath better but not loose the filter that may help as well there also a bt 100 engine and a bullet motor with eletric starter

[@LAHover]

After I grab some trail fenders I'm going to open it up a bit, thanks! Just got to take care of the mud flicking first.

[@robertpolicastro1]

Don't forget to reject that carb. Between the pipe and a free flow air filter it will be lean!

[@SandmanOG]

For the overheating, simple bolt on or clamp on aluminum extension plates onto the head, extending the fins not much is needed depending on temps, high temp JB Weld works as well, Other option is a simple plate with a few 1/4 holes for flow behind the motor to stall the cooler air at the motor for longer, ( I use this when temps get in the 80's ) I have simple hose clamps around the top cross bar down to a 4" X 8" wide plate of aluminum, a series of holes I experimented drilled for flow ( it's needed, can't stall all the air it has opposite effect😨)

[@lengaming1651]

I think that the knocking you're talking about is just the expansion chamber doing its thing

[@LAHover]

Ya? man I hope so, that would be great :D

[@lengaming1651]

@@LAHover Start the engine and listen where the"knocking" is coming from and stand behind the exhaust.

[@brunomusraimondo7710]

@@LAHover hello Sir i just wanted to tell you that that knoking or pinging as you say its actually spark knock, here is a video for you to inform more about the subject kzbin.info/www/bejne/onimZmSjfrasos0

[@shamusyasharahla8116]

The factory exhaust was cutting speed. Just removing the screw changes to speed dramatically

[@pranksbehindacamera5254]

You need to build a like a 15×20 shed to work on the bikes in

[@evanmoore7821]

Good video it looks cool and sounds better

[@blucz883]

I know that is not for this video but i learned new awasome thing... You can take of this 2 storke 80cc bike by playing little bit with the clutch lever... I was stuck on the hill and I wanted to go up and I tried to take of withnout pedaling so i Give it a gas and then slowly really carefully started to lowering clutch lever and at one point the clutch is half engaged and half way not it a half centimeter before the clutch lever is full in... I recomend you give it a try its kinda fun if you learn it... But you need a lot of trys... One mistake or realising to fast and it will die on you so you need to start it again... Sorry for my English but I hope you get what i mean... And U dont need centrifugal clutch to be able to do it... I have stock one and it work like a charm... Just need a lot of practice to get a grip to it

[@josuemelara5085]

hi,Ise you have the big sproket ,what chain number of chain are you using?i just got that mufler!!!

[@bradleythorsons3261]

Add extra oil to the cylinder when new so it has oil in bottom and it stays cool

[@user-kc2ru5xo4k]

That sound is NOT knocking, it's in fact quite the opposite - it's '4 stroking' caused by an overly rich condition. I encountered the exact same issue when I too fitted this exhaust to my setup. I fixed it by going from the stock 0.70mm jet down to a 0.65mm.

[@ediot.1012]

Did the sound of your engine go away? Because I did not change anything on my bike and it was doing that but when I look at the fuel line I saw that it was squeezed.

[@LAHover]

Ya she lined out and stopped making weird noises. I think the only thing I did was switch to a colder plug, and start riding a little faster. It might have also been break in related.

[@jeffvasquez7686]

What area do u live in? That would b so fun to ride thru woods like that

[@RngdMtrx]

it sounds like its 4 stroking but i could be wrong, could be a too rich mixture anyways by now im sure youve figured it out

[@ericmcginnis9413]

if you don't mind my asking where did you purchase yours 100 cc from and how much? I'm sure you have said as much in videos but if so I missed it!

[@PlayingWithFireOutdoors]

Mine came in from Florida I built mine with his suggestions in mind kzbin.info/www/bejne/sKfbiYlvntaHprs

[@LAHover]

@@PlayingWithFireOutdoors Got mine from "Bicycle Motor Works" on Amazon. I payed 160$~ for the motor.

[@PlayingWithFireOutdoors]

@@LAHover I've bought some of my add ons from them !

[@jeredburson2320]

Awesome dude

[@eliezer2273]

where do i buy an equal? and how much is it?

[@DavesCoolCustomBikes]

Yeah I did the whole pedal start shit for the first two years of build me a thing and then I called it quits when I found out there was a lousy $10 pool start option that you can add to it now I just pull Starley and it’s so much better and I just wish I could quiet it down somewhere people didn’t hear that much

[@ericmoody3944]

So I just got my motor two days ago and my bike frame is to small, the carburetor fits but without the filter. Is there any way to get that bit of extra room?

[@LAHover]

For a quick fix you can zip tie the foam to the carb using the screw holes. Heater hose can be used to off set the carb, and they sell adapters for them as well... it's why I recommend people buy a motor with the lower 40mm mount, and steel frames.

[@ericmoody3944]

@@LAHover Thank you

[@LAHover]

@@ericmoody3944 If you have a motor with a 40mm lower mount the roadmaster frame will work, but if it's a motor with the smaller 6mm studs and 35mm~ lower mount you may need cruiser bike or a 75.5-29" mountain bike. and even some of the 29" frams with large down tube won't work... It's tricky I know.

[@LAHover]

In a pinch, the Huff Cranbrook will fit all 2 stroke motors, and most 4 stroke motors.

[@jorelldye4346]

Eric Moody also you can rotate the head 180* so that the spark plug faces the opposite direction. That way you can lean the carb upward into the corner of the frame without causing clearance issues for the spark plug and boot. The head is reversible. Note** this is possible on the triple 40 engines, but with the YD100 engines, you can't turn the head without turning the jug.

[@osbornc2725]

Whaaa? Doud,I totally am pulling 40mph with a 52.tooth n 4mm of port exhst n intke on wooded trails with my YD the potential with these heads is up there my guy!

[@LAHover]

Lol nope... You can try to defend it all you want, but I know for a fact you are not pulling 40mph on a 56t sprocket with a YD-100... And let me guess, you cant/won't show us video proof?

[@osbornc2725]

Hmmm ok give me some time to upload I think you just wanna see me sh-hell a motore lol

[@LAHover]

@@osbornc2725 you show me 40mph on flat ground with the 56t and yd-100 and I will give you a personal video spotlight, while admitting defeat... I'll even throw in some stickers and 40cal valve caps as a prize!

[@09mantlek]

Hey LA hover, was wondering what app you use to check your top speed?

[@kevinmeahan4603]

So are you going to be live tonight

[@SyberSqueegy]

What is the name of the Speedometer App you use?

[@pitikhagood]

Wonder how heavy is that when used manual pedalling?

[@bobg3034]

A colder heat range on a plug will not make the engine run cooler it will just transfer heat faster from the tip of the plug!

[@jamescrawford3325]

Where do you purchase flexible pipe at ?

[@speedy-cc]

Pulls more power b4 it selfdestructs lmao😅 sounded really smooth at high rpm tho

[@Zombiripuli]

Hey Can you do a video on getting the gas and air ratio right so that the bike stays going? I just built my YD100 and the clutch only fully engages when its pulled all the way down, and it is a really crappy halfway engaging clutch, when I lock it with the clutch lock. So I can't really have the bike stopped and going, it always has to be moving, at least so far. My climate is about 0 degrees celsius, just above freezing temperature, is it dangerous to go about with the stock jet? Have you got some recommendations for me for such cold climate?

[@LAHover]

I can help you with these questions, but it's to much for a comment. Please join the discord server, and find me in the help channel. discord.gg/Chj9K5r

[@Zombiripuli]

@@LAHover Thanks, I appreciate this! See you there!

[@DogsaladSalad]

What app do you use for your speedometer on your phone?

[@larryshaver3568]

Did that bike come from Walmart? If so i think I'll look at a few

[@LAHover]

Yes, not bad for a dirt cheap bike. It held up for a long time too.

[@MileytheJeepV2]

Does this exhaust work good as an expansion chamber... got one from my old bike but don't wanna use it if it's only gonna be a noise maker

[@MileytheJeepV2]

Also my bike makes that noise a lot thinking its either a 4 stroke or a miss cause it hasn't blown up yet lol

[@joneserupinsmoke9161]

@LA Hover lol hey any Bigfoots chuck rocks at u yet?

[@robertpolicastro1]

Nice! But is it worth it?

[@LAHover]

I gave my opinion at 00:32 and 13:18 ... In short, if your budget is under 50, your not sure about mounting space, and you need a silencer, yes it's worth it.

[@cletusspucklerstablejeaniu1059]

You get to meet older chicks on back country roads.

[@jeremiahacree8896]

the long header tube brings the low end torque

[@pitikhagood]

Can this climb an uphill that's around 20-25% gradient???

[@thakoalaking5022]

You could have skipped a tooth or it might be off 180 degrees or detonating prematurely mine had a knock and wouldn’t idle well then I swapped frames changed the spark plug tightened the clutch and loosened my chain a little it runs super smooth not much for speed but definitely smoother

[@PlayingWithFireOutdoors]

Hey LA HOVER how are cv19 issues where you are?

[@LAHover]

No one I know has it yet. Hopfuly it stays that way...

[@pilotlife5190]

I tested the compression on these motor and they should be about 115psi

[@mikewalker9656]

Check the distance between the piston and the top of the cylinder they might be hitting that thing should be pulling the front wheel up with a 56t

[@fionnnolan]

Your videos are getting so much better and is it much louder than the stock?

[@LAHover]

Ya it's a good bit louder. around the 13:00~ mark we talk about the sound.

[@fionnnolan]

@@LAHover oh thanks also would it be ok to take the cap off the stock exhaust because i took it off and it was really loud but im afraid of no back preassure because i heard 2 strokes need back preassure

[@onway78]

I try start up mine for the first time choke is open wide soon as I close the choke engine shuts right off?

[@vipervidsgamingplus5723]

Choke is used when getting the bike started, this way here the motor can warm up. If your engine dies when it has the choke fully applied then you need to adjust the idle screw.

[@onway78]

@@vipervidsgamingplus5723 thank you for replying,I I replaced the carburetor with a high performance now it works perfectly fine... Should I change my exhaust pipe too

[@zanderman.]

What do you think the best bike is to motorize?

[@gringoanon4550]

In the old days, motorbikes were run on methyl and Castor oil. But I saw a guy running a two stroke on pure olive oil

[@motormikemakropshop3137]

HARD TO TELL ON THESE MOTOR COULD BE THE SPARK PLUG SWITCH IT TO THE OLD ONE SEE IF ITS DIFFERENT ALSO ID GET SOME LUCAS CAR ADDITIVE AND ADD A FEW DROP ON THE WHOLE SEE IF IT STOPS IT CANT HURT IT JUST A DRIP ALSO IF IT IS A KCOCK MIGHT JUST GET YOU BY A LIL LONGER GOODLUCK

[@muddybarkus]

What I'd give to have trails like that in central Florida.

[@kevinjanowiak3489]

I’ve had to run 2 base gaskets and it does mess with time just a little bit my motor is extremely modified and it took a long time to get in the power band but since you ride trails you would benefit by putting the two base gaskets or you could raise the exhaust port and lower the intake port to get ride of the knocking sound. One question tho what size sprocket do you run for trail riding it looks like you have a lot of low end power

[@LAHover]

Thanks for the info. I'm running a 56 tooth.

[@motorizedbicyclerider5296]

Hey how you doing today hopefully you can help me ,what kind of spark plug do I get I know it's in NGK but where I shopped there's two different kinds what's the number I have a 2-stroke motorized please help thanks

[@MatteBlackBuick]

B6HS I believe