LAN MAN WAN SIMULATION

Opening and Ending soundtrack : Horie Yui - Sakura
Hi guys, this video will show you how to create a simple Network design using Cisco Packet Tracer.
Check it out.

[@ariakun6410]

Thankyou :D

[@ramonesjarviet.5786]

hello can you put the link where we can download the actual simulation file

[@JayPatel-vt7qv]

how and where can i download this topology.........()()()()

[@hendrystarsong]

sorry to say but the file has been deleted, as you can see this video was from 4 years ago. It's pretty simple, you can create it yourself from scratch while watching this because the video is not cutted. Good luck !

[@adrijunaidi9715]

can you explain the command "#int 1o0" in 6:28. please

[@hendrystarsong]

hi Adri, it is the interface loopback 0 / enabling the loopback interface. The loopback interface is useful because it is an interface with an IP address which never goes down. It chooses the Router ID from the IP addresses of the configured and enabled interfaces. Loopback interface is always up unless someone disable it, other interface will just shut down if there is a problem on the link. ========================================================= Ref:www.ciscopress.com/articles/article.asp?p=2180208&seqNum=6 The loopback interface is a logical interface internal to the router. It is not assigned to a physical port and can therefore never be connected to any other device. It is considered a software interface that is automatically placed in an “up/up” state, as long as the router is functioning. The loopback interface is useful in testing and managing a Cisco IOS device because it ensures that at least one interface will always be available. For example, it can be used for testing purposes, such as testing internal routing processes, by emulating networks behind the router. Additionally, the IPv4 address assigned to the loopback interface can be significant to processes on the router that use an interface IPv4 address for identification purposes, such as the Open Shortest Path First (OSPF) routing process. By enabling a loopback interface, the router will use the always available loopback interface address for identification, rather than an IP address assigned to a physical port that may go down.

[@adrijunaidi9715]

ohh okay okay. thanks..

[@JayPatel-vt7qv]

taro bap interface che a.....