Axcel Driver Sight

[@fportillo211]

Was thinking of getting the UV slider but this looks like a superior product!

[@Saddle-Ninja]

Great to see innovation by companies pushing other companies to improve

[@marshallnorris7302]

I started using accel sights 8 years ago and their sights are amazing and the quality is way above the competition. You can’t understand or appreciate the quality until you try one. The micro adjust is amazing! Will be putting the Accel Driver on my new Mathews Lift X 29.5” this sight is superior to the ultra view in my opinion and $180-$200 cheaper!

[@dimitrihorning4718]

Way better value than that new Mathews UV slider

[@Saddle-Ninja]

The axcel uvslider lol I do like that they fixed a couple things the uv wasn’t great on - mainly the dim pins and zero stop

[@andrewanderson6683]

Loving the new sight

[@LancasterArcherySupply]

Me too, bud.

[@G-MaxQue03]

Wait you got it already...when does it come out?

[@andrewanderson6683]

@ loving the sight from the review

[@wesb4060]

I see companies are already starting to use the dual dial system that the UV slider uses.

[@Gibsonlife573]

I don't think there's a sight on the market that can touch my Landslide and I don't think people know what they're missing I think they just seen a flashy or product and bought it and now they're like oh it ain't as good as what I thought but if you would have bought the Excel Landslide you would have understood the Machining quality is so freaking amazing everything about that site is Bulletproof

[@optimuscrime608]

Best sight on the market by a long shot. I have the UV and the Dialed sights as well and they are all amazing but nothing can touch the landslyde

[@Tucker82423]

Do you know if the green matches the Mathews ambush green?

[@jamesashley3827]

👍Very neat design

[@LancasterArcherySupply]

She is a rowdy and pretty little featherweight, ain't she?

[@G-MaxQue03]

@@LancasterArcherySupplyWhen are you all going to have this sight in stock?

[@samvuletich2687]

Can you easily purchase and swap out different pin configurations for this sight?

[@LancasterArcherySupply]

You can…..Axcel has different scope options. You just loosen one screw and remove the scope.

[@AlAndaluz63]

When is it available?

[@alanlo5033]

Will the sight be compatible with the uv scope?!

[@josephporfido2433]

Ultraview scope rod .490 should do the trick

[@SeaSaltMud]

Yes

[@tannerharris1483]

Why would you put a lower quality scope on it

[@jonathan_guerrero]

Why do people put a scope with the most atrocious pins on the planet 😂

[@ny-co3039]

PJ do you know a discount code i can use for the website? I love shopping Lancaster archery supply!

[@LancasterArcherySupply]

You can always subscribe to our announcement emails to be the first to know about any deals and specials we are running at any given time.

[@Mechanicallyinclined141]

Looks good and very customizable but why not make a bridge lock mount with more than one mounting point?

[@LancasterArcherySupply]

At the core of their design was to make a super light sight that takes up very little space. The Bridgelock mounting point fits into their "shorter" sight design for increased mobility.

[@pjreilly3997]

The standard mount bar will be longer and it will work in the Bridgelock space.

[@Wackmaster69-c4p]

Does this sight except a light kit

[@LancasterArcherySupply]

yes it does. The Accustat, AVX-31, and AVX-41 scopes all accept a sight light.

[@MingsiLi]

When is the release date and can the dove tail pro version be put into bridgelock system like the landslyde can?

[@MatthewLor-vr8wz]

I'm sure it can, but you may run into windage issues. I would want to get the dove tail pro and use the windage bracket if compatible

[@MingsiLi]

@ landslyde worked fine on Mathews lift without the bracket. I have one installed. The older Mathews bow needed the bracket

[@MatthewLor-vr8wz]

@MingsiLi it looks like the dovetail pro version kind of kicks to the left a bit though so may have windage issues there

[@LancasterArcherySupply]

They are available for purchase now, shipping scheduled to be early 2025 (January) as of posting. They are also making a separate Bridgelock version that includes the required windage offset built into the bracket - something the dovetail does not have.

[@MingsiLi]

@@LancasterArcherySupply bridge lock version has a shorter bar which is not ideal. the landslyde with the carbon bar worked on mathews lift through the bridge lock without an offset bar. will this be the case for the pro version as well or will I definitely run into windage issue

[@G-MaxQue03]

Ive already ordered one to replace my MBG pro hunter HD three pin

[@G-MaxQue03]

I ordered through a local dealer in Washington State that does custom bow strings and shoots competitively.

[@south_hunts_605]

Nice!!!! The never ending quest as the sights get more expensive and advanced … How far does the site tapes go out? Tell me 120 to 150🙏🏾

[@GardenArcher7625]

How heavy is your arrow? How far do you draw your bow? How high is the draw-weight? Are you into archery? 😊

[@pjreilly3997]

The tapes vary depending on speed, but there are tapes that go to 150.

[@south_hunts_605]

@@GardenArcher7625 was that directed to me?

[@shanefickes8714]

Can you adjust the pins or are they fixed?

[@LancasterArcherySupply]

They are most certainly able to be adjusted.

[@josephporfido2433]

Depends on the scope you get on the slider. The avx 31 and 41 have replaceable but fixed pin cartridges, the accustat ii has either 3 or 5 horizontal pins which all have micro adjust

[@jarradpredmore7012]

Does this have the rapid adjustment like the lakndslyde?

[@pjreilly3997]

Not sure what you mean by rapid adjustment? But it has all the features of the Landslyde but with a new wheel and windage knob

[@jarradpredmore7012]

The ability to push in the scroll/wheel and slide the sight down without physically using the scroll.

[@pjreilly3997]

@@jarradpredmore7012 I’ll have to check that but I’m gonna guess not since it only takes a half turn of the wheel to go from the top of the bar to the bottom. So there’s not really a need for that particular adjustment

[@jonathanbarksdale8595]

How bright are their pins late in the day? Compared to mgb?

[@pjreilly3997]

VERY bright. I have never needed a light when hunting from a tree stand. I can still see my pins when I can no longer see the deer.

[@jonathanbarksdale8595]

@pjreilly3997 ordered one locally today . Like the simplicity of it . Thank you

[@jonathan_guerrero]

No one makes brighter pins than BG. But the axcel pins are pretty damn good

[@jakesoudant6943]

I love this. Uv slider but not as ugly

[@LancasterArcherySupply]

Beauty is in the eye of the bowholder.

[@ThomasGail]

@@LancasterArcherySupply I see what you did there.

[@rayking3466]

The axcel is built better. Is actually metal instead of plastic. Has a round housing instead of oval. and doesn't cost $750. Don't drink the koolaid people.

[@justinputra10]

Is 3rd axis micro adjust?

[@pjreilly3997]

Not third axis

[@justinputra10]

@ alright thanks

[@Bdf3604]

I like it

[@LancasterArcherySupply]

Glad to hear it

[@DanielMcleod-z1q]

So a Landslyde with a bridge lock bar and an accustat ( same ole scope) for more money

[@LancasterArcherySupply]

It is decidedly not a Landslyde. Much lighter, more custom options, smaller, and MUCH less hardware involved.

[@TheNewBowunter]

No light? For a hunting sight?

[@south_hunts_605]

It accepts a sight light

[@douglasbarton7440]

Sweet i we ont one.

[@brycekearns207]

This looks somewhat similar to what levi morgan runs on his hunting rigs

[@LancasterArcherySupply]

There is a minor chance that it is vaguely similar to something Levi has been known to perhaps run.

[@brycekearns207]

@LancasterArcherySupply LOL I get it I get it

[@Gibsonlife573]

Oh I can see him getting a lot of crap for the Dual will

[@CryptoHuntinDad]

Very nice sight but I never once thought they would be 500.00 I thought it would be around 300 or 350 but this sight isnt like the other 500 sights. Come on guys do better

[@josephporfido2433]

Sir this is pretty much the same price as the landslyde

[@LancasterArcherySupply]

You can find versions of this sight below cost of versions of Landslyde sights, you can also find Landslydes that cost less than versions of this sight. Having said that, this sight is smaller, lighter, requires a third of the hardware, and is just as technologically advanced and durable as a Landslyde. It also includes the HubCap customization system. It is a high end sight, no two ways about it.

[@mat_in_texas]

I think I’m gonna stick with my Trophy Ridge SWFT for half the price.

[@db66-i6i]

it's so weird to me that people promote new products are always really out of shape dudes that look like they have never even picked up a bow

[@LancasterArcherySupply]

Brandon Reyes is literally a pro archer and hunter. He probably knows more about archery than the majority of people on the planet.

[@traviscroft91]

I mean he is selling archery gear ….not a juicer

[@ArchersAnonymous-nb4ym]

This is KZbin not Grinder, why do you care what other men look like? That shits weird

[@Getdownorlaydownbum]

What do you look like lol

[@pjreilly3997]

I can assure you....Brandon Reyes has picked up a bow