LAND Tech Series | Installing Your Gates Belt Drive

Learn how to install your Gates Carbon Belt Drive on the LAND District in this step-by-step guide. Each step is essential, so get ready and follow along for a smooth installation process!
Tools needed for installation
A way to lift back tire (motorcycle lift)
Torque wrench
Axle nut socket & 21mm wrench (Axle nut socket can be replaced with 21mm Crow's Foot)
Two 5mm allen sockets
4mm ball end
13mm wrench
6mm allen socket
Pliers for master link
3mm allen socket
Heat gun
Brass punch
Hammer
17mm wrench
Blue Locktite
Red Locktite
Zip ties
Two ratchets
.
.
.
#LANDMoto #LANDEnergy #LANDDistrict #eMoto #electricmotorcycle #moto #motorcycle #ev #electricmobility #electricvehicle