Landoll 6230 disk’s get new iron.

We end up rebuilding both of our Landoll disks in this video.

[@cubcadetsteve4148]

Enjoy watching your Videos Andy👍

[@FarmingFixingFabricating]

Thanks for the comment

[@cubcadetsteve4148]

Any followers here affected by the massive flooding in the Midwest our thoughts and Prayers are with you...

[@arnoldromppai5395]

thats whats great about Canada, far to many hills never get any flooding, other then the odd back road pipe washed out, MB has the red river flood way that looks after the flat lands out west. but we are all well above sea leavel

[@cubcadetsteve4148]

@Levi Frederick your welcome. I couldn't imagine what you all are going through after seeing pictures and videos posted. Take care and God Bless!! Steve

[@2cylinderfarmer]

When you did the time lapse what interval did you set the camera? Great video alot of money there.

[@FarmingFixingFabricating]

2cylinderfarmer 6 times the speed

[@hayman1971]

I didn't know that there were round arbor shafts thought they were all square! Think that is better? I would think they would be harder to keep tight but I guess not. Didn't know if you knew it but you had a little dirt on your shirt and pants just saying!

[@FarmingFixingFabricating]

Yeah there John Deere disk arbors were square. We had a Krause and that was round to. Dirty closes gives the uniform company something to do.

[@rodneyerdmann1545]

Great team effort! It's probably because you're a great Head Coach!!!

[@leesteele9290]

I don't know my model numbers but does Landol really call those disks or vertical tillage tools seems to me that's a pretty gray area anymore whichever it is I'm sure it will preform a lot better now! Thanks for the video.

[@TheGhostOfLuciasClay]

These are disks, the disks are "bowl" shaped. They cut and mix the soil. Vertical tillage tools the disks are straight with a wavy edge. These more slice and size residue and loosen soil leaving some residue on top.

[@nickpersenaire4443]

Shop work always something to do. Thanks for sharing the details. Andy , Come on spring

[@MienTayTiVi]

heavy equipment in the field

[@PlanetMojo]

I especially enjoy the fabricating part of your channel. I like fixing and fabing myself, but dont get to do it on this scale. Great work guys!

[@kopenhagenkid]

How many ft is your disc

[@FarmingFixingFabricating]

Kevin Christiansen we have 2- one is 33’ and the other is 23’

[@Philm88]

Why did you replace the spacers?

[@FarmingFixingFabricating]

We were having trouble with the disk arbors losing up. Had an idea that they were getting thin

[@tomrichter244]

Do you dedicated mechanics in your shop, or are they like you, field worker and mechanic both? Thanks

[@FarmingFixingFabricating]

They are field whatever

[@sneak6654]

Great video! I’ve seen some folks weld up the holes of the used disc’s and make a Wok or a frying pan out of them. They seem to work pretty good. Take care.

[@davidschmidt1780]

My son did that takes it camping and cooks over the fire pit works great

[@DaveSParty]

Wow, I had no idea of the wear down of those disks. So you guy just don't ride in automated tractors huh? You guys work Hard. I wanted to know about the tiller and you guys didn't disappoint. Thanks for showing this.

[@johncheatham897]

Mini boss is kinda quiet.

[@curtislongtin3577]

If you didn't get dirty you didn't do it right!! Well done guys!

[@FarmingFixingFabricating]

Sometimes yes

[@timheasley612]

I’m surprised there weren’t more shafts worn out they take a beating.. great video boss time to haul shit 😳😳!!!

[@andrewwoodhead8305]

How many acres you gotta disk up this spring??

[@FarmingFixingFabricating]

Couple thousand

[@andrewwoodhead8305]

@@FarmingFixingFabricating be a nice steady job for someone Andy 👍🚜

[@10thgenerationdairyman61]

Good work

[@FarmingFixingFabricating]

Thanks Eric

[@chrisandert9171]

Good job to have done. Hope they hold up well know how it can be to do all that work and have blades bend and crack immediately

[@arnoldromppai5395]

hel them disks were good for another year yet,, run out is 4-1/2" but hay it his cash right.. oh ya have until March 30th to get all your taxs right offs in for 2018

[@FarmingFixingFabricating]

We were about 5.5"

[@curtweatherbee2523]

Andrew what a team of working guys 😉👍🏻🌞

[@AndrewW-nx8zr]

Nice video Andy ! We have the same disk you have

[@FarmingFixingFabricating]

They are a good disk

[@AndrewW-nx8zr]

Ya we have Landoll plow to I thank like 2311 or something

[@williamj.barnhartjr.3108]

That's alot of work and alot of money lol great video I enjoyed it thanks for sharing can't wait till the next one

[@johnnyholland8765]

That job was one I always hated. With a disc that size it takes a community of folks to do it. We ran 32 ft IH harrows. Can't remember how many disc it took but it was a lot. Hardest part was the center section. Relocating the gangs. How many bearings did you have to replace? We always replaced them too.

[@FarmingFixingFabricating]

We replaced all of them, I ain't sure how many there actually was

[@chriswithington7557]

Do you just use big impact to tighten or a slug wrench and sledge hammer also? I have to use slug wrench on my big rome to get them tight enough. I feel your pain on the blade problems, I put new 24" boron blades on my rome and broke 3 blades that spring. Never again, back to weise blades.

[@FarmingFixingFabricating]

We just use the impact too set them then we use a pipe about six foot long and really tighten them with that.

[@jaydenc27]

I’m guessing you didn’t come to the Teitsworth Alvin Smith auction today in Barre center mostly everything went for way too much but you could find some deals their articulates went for really cheap

[@FarmingFixingFabricating]

No I didn't

[@mrnate4280]

Not trying to count your money but what does it cost to rebuild a disk like that

[@FarmingFixingFabricating]

It was about $10,000 for the big disk and $8,000 our so for the small one.

[@leejamestheliar2085]

You guys are a well oiled machine. A captain would be proud of the way ya docked that ship in the bay. Thx. For the video and G'day to you and yours.

[@FarmingFixingFabricating]

Thanks for the comment

[@hughwhaley3179]

Another great video thanks for sharing 🚜

[@benjaminedwards886]

I enjoyed this video. Hopefully there will be lots of tillage videos to come. Thanks.

[@FarmingFixingFabricating]

Benjamin Edwards thankyou

[@edniemyjski3303]

just wondering why you dont have a field finisher.i switched to krause landesman years ago because of less soil compaction and sweeps are so much cheaper.

[@FarmingFixingFabricating]

This is what we have always used

[@stubarry3206]

Landoll tidy looking set of Disks Andy, won’t be long and it’ll be in use 👍👍 good video

[@FarmingFixingFabricating]

Stu Barry couple 2-3 weeks and we will be at it

[@OkieDoke18]

What tractors you use to pull these big pieces of steel? 33ft is alot for a 8320.

[@FarmingFixingFabricating]

OkieDoke18 9410 or the 9320 on the big disk and the 8320 on the small disk

[@MrMagnum7220]

Is that a finishing disk? Doesn’t look like a “cutting” disk

[@FarmingFixingFabricating]

MrMagnum7220 yes

[@corydevries3494]

Great job on the video Andy lot of iron on them discs have to drop a gear with 3" of extra blade! Maybe even put the duals on the 4320 to pull it over the hills! lmfao 🤣 keep up the good work

[@FarmingFixingFabricating]

The 4310 had trouble just moving the disk not to mention having it anywhere in the soil

[@corydevries3494]

Ya I bet that thing is a monster behind the 4320. I was just kidding about it actually pulling it

[@matthewjohnson3910]

Great video thanks for sharing andy

[@jetegtmeier71]

I didn't know articulated tractors had PTO's on them ??

[@FarmingFixingFabricating]

Yes you can add those

[@brianwolfe6520]

Thank you for great video

[@davidschmidt1780]

That’s the video I have been waiting for thanks !

[@FarmingFixingFabricating]

We are showing getting everything in and looked over.

[@stephenprettyman2896]

LOVE to watch you fella,s work ha ha.

[@FarmingFixingFabricating]

Thanks for watching

[@cntslesfabrication]

The inside passenger rear tire looked low boss when you were hooking it up at the beginning

[@FarmingFixingFabricating]

Passenger side?????? Lol I'm just busting on you Rynne. I'll have to take a better look at it.

[@cntslesfabrication]

@@FarmingFixingFabricating Yes the passenger side rear inner tire of the dulls. I know you are I just realized what it said

[@donald1056]

Damn them are big wide disk

[@FarmingFixingFabricating]

They look big when they are inside for sure.

[@PaulsonFarms]

Thats got to be one of the jobs I hate to worst, disks are always a pita to work on.

[@FarmingFixingFabricating]

Time consuming yes

[@PaulsonFarms]

@@FarmingFixingFabricating By the way, have you checked the varicool fan on your 9r? If you havent you might want to check and grease that. Just Did our 8R

[@FarmingFixingFabricating]

@@PaulsonFarms we replaced it last year

[@PaulsonFarms]

@@FarmingFixingFabricating I've heard they're expensive to replace. It's just like deere to change the service hours on those after the fact. I filmed a video on it so hopefully I can get it up today or tomorrow.

[@aaronwilton6531]

How wide is the big disc?

[@FarmingFixingFabricating]

33' and the small one was 23'

[@aaronwilton6531]

Yeah that’s large, compared to my little heavy 7’ disc

[@egan88817]

The wear down on the disk blades is impressive, how many years did that take? The ground wearing the blades down also does a decent job of sharpening them. I think that is the worst part of the whole job is getting the old gang off without losing fingers or needing stitches. Thank you for today's video.

[@FarmingFixingFabricating]

The small disk went 7 years and the big disk we use more and that one we had 4 seasons on

[@jerome8469]

Hi Andy I'm Third Peace brother

[@FarmingFixingFabricating]

Hello