Laptop no picture, loop restarting, a different side of a graphic fault

Ebay store: www.ebay.co.uk/usr/sorinelect...
WebSite: sorinelectronics.com/
Patreon support: / electronicsrepairschool
KZbin Members: / @electronicsrepairschool
Forum: forum.sorinelectronics.com/
Discord: www.sorinelectronics.com/discord
My tools: www.amazon.co.uk/shop/electro...
PayPal me: www.paypal.com/paypalme/Elect...

[@mrOga]

This is the reason why I don't skip adds on Sorin is videos, I feel it's the least way I can reward you. God bless you my mentor

[@sweetmemories4448]

I should do that too. Thanks.

[@steinbauge4591]

It's a bit hard when there is more ads than content

[@dr-gaberibrahim5268]

No doubt , you encourage us to open any device tray to fix the fault without scaring . Thanks Sorin

[@osamasegh8737]

Always we learn from you NEW troubleshooting techniques, thank you so much sir for your efforts.

[@nadirnikakhtar1129]

Had an old hp with exactly the same issue, followed your method and voila, fixed!!!!!! 🙏👍 thanks very much!

[@MovieTheGreatGatsby]

Thank you! Your videos are useful as always and you are describing all the steps really well. Keep the good work up!

[@ilanbinkovitch6054]

A pleasure to watch, as usual, Sorin. thx

[@dtech406]

Thank you very much for making us to have boldness to repair any electronics that come on our way

[@sweetmemories4448]

Thank you Sorin, Sir I learned new things from your video always. The clogging of the vent of the Heat Sink fan housing is NOT easy to spot. Thanks for showing it, which I missed in my Toshiba P55W-B5224 laptop while cleaning its fan blades. You are great, Sir!!!

[@arnabbasak3438]

I learned a lot for you. Now I'm recovering some laptops just for you. Thank you so much for showing me the path. You god to me

[@josephbrennan4622]

You would not believe how many comps I have seen binned for this same fault, Great show Sorin thank you.

[@rodwellmatsaure7217]

thank you sir Sorin your videos are upgrading our work keep it up

[@radicalares]

i was struggling with this exact same issue and i was out of options, but your video thanks to its very precizely explanation fixed my laptop. thank you very much

[@runthomas]

i know a little bit of basic electronics theory and practice..but this guy opened up a whole new world ...man i love electronics...and now i want to fix everything...at least have a go.

[@computersrepaircotesaint-l7407]

Thank you king of electronic. love your videos

[@jacobleedowney]

High heat causes cold solders, even in BGAs. Very great video, instruction, & repair!

[@taximanhb2]

thank you...learning all the time.

[@aussiebob1315]

i absolutley love your channel mate! ...so thankyou all the way from New zealand....no one here or in australia gives away there trade secrets unlike you ....like car mechanics you know? i just repaired a sony vaio i7 due to this fault and your video(turns on turns off fan spins no display ) , i was quoted 700$ NZD to repair in a computer shop , more than what it's worth...watched your video fixed with 3 hours of my time (i'm a amateur) i have learnt so much from your videos so thankyou so much greatly appreciated and i think i've found a new way to make money ( new zealanders are very stupid with computers) thankyou thankyou...you honestly should have millions of subscribers

[@electronicsrepairschool]

Thank you

[@ijapsdjhkahbefajldas]

Just did ur kind of graphics repair at an HP DV 9500..and yeah, it works now 🙌🏼

[@saarike]

Thanks again for the great video! Learn a lot.

[@hacenemarioadli4539]

YOU ARE MASTER, BRAVO AS ALWAYS

[@robertlopez2365]

Great Video, new to your stream I have worked with larger computers in the past and would throw out motherboards believing that they were not salvageable. I was a bit intimated on working on such a smaller platform. Thanks for your teachings. Dr Rob

[@extraincome9593]

Hi there Sorin Another Great Project. Thank you for sharing it with us. Godbless us all Brother.

[@bodybyronbyron]

Hey Man. I just start washing your videos, I just wanna tell you that you're best. love your work. you inspire me to start fixing my own computers that had some issue. keep up the good work.

[@NMSSN]

Now all the videos should be clean. :')

[@SuperAdventure11]

@@NMSSN HAHAHAHAHHAHAHAHAHAHAHAHHAHAHAHAHAHAHAHAHHA

[@mulatiechekol4513]

Thanks for the video!

[@nelowho367]

Thank you sir for sharing your knowledge.

[@worroSfOretsevraH]

Don't worry about beginners. (there will be your low level electronics videos for them) You should make videos about the hardest, most difficult jobs you have. Even if you think that a video doesn't worth filming, I ensure you, YES it is. There is a high demand for these kind of videos. Real repair shop daily repair works from experienced repairs man.

[@domingosaronemuchanga1578]

Hi! Sir I'm always watching videos your doing perfect work thanks alot.

[@muhaahaloa941]

Wow this guy knows what he is talking about that flux you recommended was unreal absolute game changer thank you mate keep up the good work.

[@onyetechcomputers9040]

I love your videos.their so educative and interesting keep it up.

[@wbrowning52ify]

Basically, you did a solder reflow with the hot air around the graphics chip. I did a similar repair, a solder reflow procedure by putting the board in an oven. You are correct that the problem will return. The laptop that I did this on worked for about 3 months before the problem returned. Thank you so much for the videos you make. They are very informative and useful.

[@kylequerijero1002]

So to stop the problem, a new graphics chip must changed? Is is available in the market?

[@wbrowning52ify]

@@kylequerijero1002 Poor cooling is the root problem. Solder reflow or as is also known as reballing recreates the conductive pathes needed for the graphics chip. The graphics chip may be available. You would have to Google the numbers and search for it. There are good chances that you can find a replacement. You may have to settle for a previously used chip. Finding a replacement main board is an option that is more probable and a more reliable option. Replacement boards are not too costly. A solder reflow is a temporary fix that may last from a few days to a year in duration. You can do a solder reflow in an oven. Search KZbin for videos which show you how to do this.

[@adebayosherif1615]

Weldone sir , thanks so much Keep the good work , i have the same problem with my laptop now , i will make use of this method , thanks sir

[@Martin-ot7xj]

Hi there, its was very very useful tutorial video. Thnx

[@ChiamakaImmaculate-dk2nv]

Thanks you so much you make my day

[@dx69suckit]

@Electronics repair school Sorin, i have just sat and watched 5 of your videos, and i am very impressed! I have a MEDION very similar to the one you worked on, on 31 Oct 2017. I will create a video for you, because what is happening is RIDICULOUS! It makes ZERO sense!!! Keep up the good work! :-)

[@3ijnweu3oq3]

bro this guy can fix anything

[@Britec09]

These are what some shops call a fix and mislead the customers, your right, this fix is a bit hit and miss which can last a short while or 6 months if you very lucky. People who repair Xbox use these types of fix's and they don't last long, maybe long enough to sell them on Ebay, which is wrong.

[@electronicsrepairschool]

selling ps and xbox on ebay, thats a good joke :))) i sold few, buyers swap the console with their faulty one and ask for money back :)) i stopped selling on ebay.

[@Britec09]

Yeah Ebay is a scammers paradise

[@linksrepair2851]

in my case ALI BABA IS THE WORSE,I DID BUY A LAPTOP KEYBOARD THEY SEND ME A WRONG ORDER.

[@Oak690]

Long term fix - need to remove the GPU, reball and install a new chip. Not easy to do.

[@josepeixoto3384]

@@Britec09 ----- open up a case; if you paid with paypal,and you have a legitimate complain, with pictures,etc,you'll get your money back,i always have ( 3 times in over 300 buys)

[@Fixingthingz4u]

Good Job Sorin :) Yes its temporary but its all you need if the customer is happy to pay alittle amount or data recovery

[@Martin-ot7xj]

hi there , thank you for your tutorial

[@yehtut3209]

many thanks, sir .

[@ilarioschneider2917]

Please show us how you put it back again. I learn to open things with you, never how to put back again. Dont worry with time, its a pleasure seen you at work.

[@7207691302]

Smart work sir👌👌👌👌👌

[@jurireville3158]

nice work master ive learn this i am begginerrr in repair :)

[@mixa890]

I have computer Lenovo V1 130 and then I put in charge I have only light what can I do

[@CameronSamanM]

Thank you for this video yah! :D

[@AkashPatel-uy6xb]

Excellent sir

[@alphanindayikengurukiye3472]

Another Nice job

[@tony3361]

Thank u your the best.

[@arnabbasak3438]

Thank you sir

[@albertcarlos1674]

Finally Friday.. How are you My Electronics Lecturer.. HAVE A NICE WEEKEND

[@belkins1]

I have used this fix many times on hp laptops and the famous xbox rrod. a lot of hp dv6000 and dv9000 have this issue. Simple reflow will get it working again. But like you said it may last 1 hour or it may last years. I have also used a copper shims/copper penny under the heatsink for gpu to try to prevent it from happening again with great success. Of course the Proper fix would be to replace the gpu chip which is not so easy.

[@privatenumber3867]

from Egypt thanks alot

[@garypreston266]

your the MAN

[@aussiebob1315]

sometimes when you are talking...it's almost like someone is asking you questions via irc or a internet chat ? is there anyway people like myself can join this? i'm always seeing very cheap broken laptops for sale here in NZ ...i have repaired about 5 so far from your videos and resold making mega profits and this is just my side hobby i milk cows during the day time :) hehe...my latest the sony vaio ..purchased broken for 20$ it's now working thanks to you and 3 hours of my time..you are a deadset legend

[@z-In-finity-]

Thankyou sir.

[@clydeohara1052]

Hi I love your videos, down to the point. I have a same issue with my HP but video does come on then shuts off, so now I am going to look at it and see what I can find in the same line. If something else could be what do you think. Thanks Clyde

[@TheForexplanet]

Sorin don't listen to the idiots here that say you are dodgy or don't do a good job. You do a great job and you fix your machines really well. If I was in the UK I would bring my dead laptops to you.

[@MrOTcomputer]

The ridiculous thing about that graphics chip is that Nvidia in 2012 sent us NEW replacement video chips that had the same defect. Which means it was just a matter of time before they would do it again. ASUS ROG Gaming Laptops suffered from this as well. Best I was able to do was come up with creative ways to cool the chip so that it would last longer..lol. It worked well. Nice video. Thank you.

[@Liferoad371]

I call this a fix.....great sound and love the microscope 5 ebay stars

[@sweetmemories4448]

I also think it's a fix. He removed the heat source by removing (brushing off the vent clog from the heat sink fan housing, brushing off fan blade dust deposits), lubricated the fan bearing with special grease, redid the heat sink contacts (scrapped old thermal paste, then wiped the contact surface with cotton swab and petrol/alcohol, applied new thermal paste and put new thermal pad for good heat transfer), put the screws back and the fan power contact back firmly. Now the fan turns pretty fast. Thus, it is a fix for this problem in my opinion.

[@Dr.Leszek]

The biggest problems in Laptop coolings ( In PCs also of course and other electronic cooled by fans ) is the no intake air filtering, sometimes you might found some foam around radiator, but it's only for outtake of air not intake, so dust is sticking on radiator and keeps the flown stucked. my best idea since now is to use some canvas filter where the air comes in, sometimes make bigger holes for air intake, and of course the easiest thing - cooling pad for laptops , but put the fans to take out the hot air not intake the cold air inside beacuse just like i said and you could see on this video, when the outtake airflow is stuck putting another fans will not fix your problem. Of course you can just simply clean the fans, replace thermal paste by checking everything in about 2 years of usage or even one depends on how much is the air clean in the room where you using your device.

[@Radek__]

I like that you are honest. I like your videos. You have 100% right. This is a temporary fix. The issue is inside that chipset/graphics chip. Because of overheating and huge power consumption traces are damaged or micro solder balls under that small silver core have cracks where we don't have any access. Puting heat on the chip can fix that traces or micro balls temporary so to fix it for good we have to replace this chip for new one. Sometimes (very rare) the chip and micro solder balls under small silver core are fine but because of huge and fast temperature differences (cold during idle, very hot during stress) a tension is created on the board. Under the chip, under whole green area there is a bigger solder balls - usually 500-700 pieces 0,5mm each and because of that tension, they can be damaged - or have corrosion. Puting heat on the chip, even for few second can also fix that cracks temporary, but in this case you can achieve very long fix in different way by making good reflow by taking out that red glue and heat the chip to 238 celsius to melt that balls. All cracks will be fixed and flux will clean corrosion. This could gives you a year or two of working laptop. Some of technican are doing reballing, they replacing old solder balls to new ones with lead. I was doing this as well a lot of times in the past, but now i know that its not worth it. After years of fixing and clients feedbacks I can tell that there is a connection between HOW do you make this repair and time how long this will stay fixed. If you take out the red glue and make professional reflow until all balls will be melted and whole chip can be move by little touch on the corner, then even if the issue was only inside the chip, then because of that huge heat and long time - you will see that laptop will work at least 6 months and more and clients will be happy. But if you leave that glue and want to fix it in few seconds (as you did on video), then you have probability that very soon it will die again and angry clients will comback very quick

[@electronicsrepairschool]

well, i did a lot of reballing before, so i can say is no differences comparing with the video. The problem is inside of the chip. We can buy the laptop from video for about £20, so is no way around spend time on that for anything else, thats why i have two choices, i can say 'no' and i can just charge the customer for saving his hdd backup or i charge for a fix like in video and give him the chance to save his backup by himself and also use the laptop how long it will work. I prefer the second one, it will make the customer more happy having the laptop back as working, even temporary

[@Radek__]

I understand. that is why I've said I like that you are honest to clients. Second idea to fix it very quick and charge only for giving to client possibility to save / backup data at home is great. I didn't thought in this way - thanks. And about differences -please allow me to have own opinion - I've made 30-40 that kind of repairs (laptop / PC graphics card, etc) doing reflow or reballing and always I ask clients to call me someday in the future and tell when it dies again. there is difference. use the logic thinking - solder must be melt to fix crack (doesn't matter if crack is on the traces inside the chip or on the balls under the chip) if you stop heat before melting point (238) you will fix crack but in the very weak way.

[@electronicsrepairschool]

i understand you perfectly, thats why i'm coming with 500 degrades (i said on video) on the top of the chip, thats the idea, but yeah, reballing can give different results on some cases

[@knowthebasicofcomputer2890]

Electronics repair school yes sorin you're right . I'm Jabir from Nigeria I like your videos . You are my best teacher

[@pinakbhattacharjee7475]

@@electronicsrepairschool Well said...this is what we ar doing just charge a little money for the laptop to work to save all his memories fr hdd in his own way & we also get some service charges extra. Even changing the on board processor gives problem so just replace that board the happy customer will be yours.

[@abidkhan-zy5rq]

Good ripering

[@alexanderamponsah3414]

thanks boss for this incredible video please what cause some components to heat on the laptop motherboard which cause the board not to power on again

[@sweetmemories4448]

I am sure the chips - the CPU and the GPU as they do numerous computations. To keep them cool, heat sink is provided to transfer heat from the chips. Then the fan is provided to suck the hot air surrounding the heat sink to outside of the laptop housing through the vents present on the heat sink housing which was badly clogged as Sorin showed in this video. Therefore, when I hold the laptop, I make sure that I am not blocking the air flow through the vents (both inlet and outlet) of the laptop. Hope I answered your question.

[@ytsemea]

Hi Sorin, I have an Intel Nuc with a similar behaviour (turns on 5 seconds, fan spinning, then off five seconds, in loop). Intel codes listing reports that this is a “power on circuit failure”. Could this be an alternative answer? The fact is that the graphics are in the cpu, the other chip is the chipset. Maybe a short? I am getting mad, the board is tiny and it’s hard to check the power supplies. Thanks in advance, I am learning a lot from your videos. You’re very kind and competent, keep it on!

[@bblackdogg4352]

These were really nice laptops..even tho they only had core 2 duo intel processors you could pare them with a good SSD and they were great. I would always hack the fan circuit(BLK R,Y,WHT- CUT THE Y,WHT) to stay on hi after a GPU reflow or MB replacement. It would extend the life of the repair by keeping the laptop cooler. Thanks for the video. I have great respect!

[@LordAnubis0909]

had the same problem on hp probook 4540s, (i5) in the end i found if i change ram slot laptop will power up. only once. the you need to change slot again. got tip on discord it might be the bios problem. bios update wasn't posible so i got new bios chip and laptop is "working fine, yes" :) ty for your videos.

[@dennisnavales957]

thanks GOD, you have blessed to share, ideas could help a lot.. repairing asus x42j and its good.. thanks

[@ThisDaveAndThatJohn]

I had the same problem with my 9 years old Sony Vaio with an AMD GPU. At some point it starts to produce artifacts like vertical red lines etc and then shutdowns, so impossible to work. What I done is reflowing (31:20) and it seems to work. The problem seems to be only with old motherboards that use no-lead solder. So the heat literally desolder the GPU and at some point it physically lose the connection with the motherboard. The symptoms can vary a lot when it happens. From what I gather, the reballing of the GPU using newer methods of soldering might be the permanent solution if you want to keep the GPU at high temperatures otherwise it may desolder again as Sorin said.

[@paulo1149]

Another great video. but why don't you use an electric screwdriver?

[@technologiedz]

best job

[@grayhalf1854]

I wish you had a little plastic container for all the screws and connectors you remove Sorin! I hate seeing tiny screws rolling about on your desk...

[@aan9877]

Good Job, i have trying too rehot chipset and used jumper fan to life , i think if fan keep life chipset will not hot.

[@michaelgay562]

cooling helped alot

[@inwerp]

liquid metal comes really handy for reflowed GPU chips. However, i am never fixing laptops with no integrated GPU on board. If you see that the laptop has Intel HD, it is very likely that you can switch the discrete chip off by moving jumpers on board(you should find it in schematics or simple google the mod)

[@buckmajor]

I am learning a lot from your videos my master! My plan is to learn the liquid and the soldering slowly getting there? I am reading to invest into some equipment and try to fix my monitor. 0.50min - Master, that laptop is HP G-Shit thousand?

[@KrishanKumar-hv8fu]

super fix

[@dennisanderson8663]

Man I wish I saw your videos before throwing an IBM ThinkPad away. The issues it had were randomly showing black screen, USB device malfunctions, and Wi-Fi malfunctions. Not sure if it was the southbridge chip or something else causing it.

[@Dr.Leszek]

The red glue around the cornes of chip is ( as i have guessed since reballing and reflowing some chips by myself ) is high temperature silicon glue, to make chip won't go up while the solder bulbs are getting hot and going up and up, the the PB Solders might get even higher than the PBFree , that's why the companies are using those, and of course the higher temps of melting for PBFree solder, problem is that companies might solder inproperly the chip, and the solder balls might be not good quality also, then the right reballing might fix the chip for lasting long but it isn't 100% sure - just beacuse of it's life is shorten of temperatures that it was working, and other things. The best way is just to replace the chip with good quality solder balls, but when it's not profitable who will want to do it? I'm doing reballing and the reflow using BGA Irda station which has also the heatplate, so the heating comes to the up and bottom of the board, and beacuse lot of people are doing things not 100% right as it should be the chips might work for 6 months or years, it's a lottery,

[@edwardtsema7740]

Its really important to have the fan clean in your laptop. If not, your graphics chip is toast.

[@GeekBii]

I had this type of HP laptop, a G62 model with an AMD graphic, it had the same problem after a year and half. The technician who fixed it told me the same think. The problem came back after a month. i decided not to buy HP laptop anymore. Another technician told me that all the HP G series have the same issue he showed me his collection of faulty HP laptops laying in his shop. I was really upset with this laptop considering the money i spended and how careful i was with it. Other common issues : hinge problem, over heating, Battery will die after one year

[@5555boneman]

Also an HP (pavillion) laptop, 3 years old with greyed-out screen, however, does show a picture on a tv via HDMI? Where would you guys start? Drivers and bios?

[@davianceable]

Nice video as always ,i have question doubt you see this and answer but ,if you would change the battery with after market one or so called genuine battery is it make a difference or not ? Thanks.

[@mattdunlop6056]

sorin: "I see fault already.......laptop says nvidia graphics on sticker"...... hahahaha best repair line ever.

[@geojor]

do you get repairs that involve the Network Section of a mobile phone, and if so, please do some videos on the Network components, and how you troubleshoot them ...

[@loschwahn723]

the best way to fix it is to desolder, cleanup, reball the chip and fit it with a thermal resistant grease. and yes it is a fix to heatup and solder it with flux and the reason why i dont like BGA-Design: it will loose contact more often as in a socket

[@chrisvax7009]

may i ask you something,why you are not mentioning us the ram,this looks like as a ram issue too,why we go direct to the gpu ? sorry if i ask a stupid question,your videos help me a lot,and i am a big fan of you

[@uel202e0b]

I wonder if there is any excess screws found on the table after the job is done.

[@seagorman]

Hate HP Laptops, many of their Laptops seem to suffer from this problem, the DV Series was notorious for it as was the CQ Series, I have about 4 x CQ57's and a couple of CQ61's that were donated following short-term resolution to the problem, only useful for spares, one DV9700 is still working approximately 3 years after the repair was done, that one is an exception to the rule as the repair is usually very short lived.

[@cosminiederan9423]

Hello Sorin 2 questions: 1. What if you replace the thermopad with thermo paste ? 2. Have you used chinese hot air soldering stations from ebay? Are they any good? Cheers

[@ElectronicSociety850]

thank u sirrrrrrrrrrrrrrrrrrrrr

[@asdfg6528]

can you do a short video about your oscilloscope, please?

[@ernieschatz3783]

Not just 'keep in mind.' It's a good idea to advise the customer to save any important data to an external hard drive and move to a new computer.

[@yuanho2883]

Nivea Creme for fans? I like it

[@steffenhalvorsen4544]

are you gonna do any live streaming where we can ask question to some repairs we have going on since i have some boards where i put 3.3v on the board since its shorted and then the chipset starts to get warm... i havent seen you have this type of case where the chipset gets warm when you put amps to the 3.3v

[@LeadFarmer813]

a trick to make them heatsink shared issue was to go to advanced power settings and set graphics to %96 of full power.

[@ningdeloy6342]

careful sir that vape electronics cigarettes not safe sometimes blusting .....to you mouth nice video sir. more video sir

[@jerryanstey7058]

My acer aspire laptop powers on as soon as it plugged to charger .Power button has no affect .fan spins very fast .blue light is lit on the power button and small blue light and a small amber light right next each other on the front edge of the computer is also lit .There is no signal or any light showing on the screen. It would be great if you could help. I find your Video to be very clear and simple approach,very easy to learn by. Thanks.

[@allanmwangi3137]

I think the genius is in the stuff he smokes. Great work though. Most hp laptop experience this problem

[@jim8230]

How interesting. I just got a PC in my shop with a Gigabyte mobo that has this boot loop problem. I haven't looked at it on the bench yet...

[@mauricelopez1745]

Can't believe people actually get those repaired.

[@anigrzetic6711]

When will start class a basic fix for beginner .

[@touati84]

I heard there is a way to bypass the graphics chip and use the Intel processor internal graphic by cutting the power from the graphics chip by removing the coil from its power supply and in some cases by replacing some resistors on the motherboard, that will be a much reliable and permanent repair.

[@TimeToRelax222]

Khaled.info That only works in Intel i3 i5 i7 laptops with integrated graphics in cpu.This is the old laptop where graphics is integrated in Northbridge.