Laser engrave? EleksMaker CNC Review and test

  Рет қаралды 150,558

Electronoobs

Electronoobs

Күн бұрын

Пікірлер: 155
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
I hope you enjoy this video. If you would like to support my projects: PATREON: www.patreon.com/ELECTRONOOBS Any question just use this comment section or my Q&A forum: www.electronoobs.com/eng_preguntas.php
@themonkey4465
@themonkey4465 6 жыл бұрын
Do you think I could make a pick and place machine using this?
@doublexstudio
@doublexstudio 6 жыл бұрын
I would like to know if it can cut papers and how close to perfection
@doublexstudio
@doublexstudio 6 жыл бұрын
how can you mount a cutter head on it?
@stephen0tan
@stephen0tan 5 жыл бұрын
hi, my one got laser , but dont have engrave .. anything can help?
@meesdees7288
@meesdees7288 5 жыл бұрын
@@stephen0tan I found the Eleksmaker now with a really good discount on Banggood: www.banggood.com/nl/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?p=7I22079633188201703T
@a28101950
@a28101950 4 жыл бұрын
Hola, buenisimo el video, se ve que eres profesional. Cual es la resolucion del aparato? Gracias , Sergio
@movich
@movich 6 жыл бұрын
Hola amigo, Tengo entendido que estas gafas protegen de los reflejos que se puedan producir en la avitación donde está el láser, como paredes, etc. Peró no te protegen si miras directamente el corte. Hay que tener en cuenta que una parte de la luz és infrarroja y no es visible. Yo también estoy haciendo una un poco más grande, de 60w Co2, y la idea es hacerla completamente cerrada con una cámara dentro y un pequeño monitor fuera... Saludos desde Catalunya
@melloncollie5429
@melloncollie5429 4 жыл бұрын
Did you ever manage to etch a PCB? I’m interested to see your results! Thanks in advance!
@davidcarter9322
@davidcarter9322 6 жыл бұрын
We use a 15W laser and a little smaller CNC system to rework panels. Unfortunately it is fixed focus and had to be modified to get the laser the required space from the surface. We got the same glasses but don’t trust them that much too. The laser powered on when I plugged the USB cable in and burned a hole in the desk !! This laser is nice a powerful but without laser focus ability it makes it a challenge to use.
@gerjimmy
@gerjimmy 6 жыл бұрын
Hello Sir your video is amazing I just bought one of this machine and I need to ask you where I can get the drill tool accesorie??
@abeedcactus3749
@abeedcactus3749 5 жыл бұрын
It is a nice machine I have no major problem with it, very precise
@matthewkunz3887
@matthewkunz3887 6 жыл бұрын
How do you like the machine as of now? Is the dual steppers on the y axis giving you any trouble?
@leemason2779
@leemason2779 6 жыл бұрын
Hello, Just wondering if you've tried to laser any plastics to see if they mark or melt?
@stephenjames820
@stephenjames820 5 жыл бұрын
Thanks for the video! I would really like to see what this laser could do with with a good hardwood instead of cheap plywood. I am thinking of buying this engraver and if I do I will reinforce all the plastic pieces with washers at each screw hole to distribute the stress as well as install corner brackets!
@goodwill7643
@goodwill7643 3 жыл бұрын
what about PCB label engraving. Can you write text on PCBs to mark where which components needs to be placed?
@shivambansal8834
@shivambansal8834 4 жыл бұрын
does this machine also work on marking on metals like brass, steel ,etc
@DerrickAD
@DerrickAD 6 жыл бұрын
Greetings, I am wondering if you every tried adding the little drill attachment you showed? Are there addon plans to be able to add that? Thanks!
@algator55
@algator55 6 жыл бұрын
This guy is a banana salesman I always look for it on his show and it's reliably there
@alextecmelo
@alextecmelo 4 жыл бұрын
Congratulations for the video man! What exactly can we do with this laser (2.5w)? Did you already record a video about it?
@severinfriedl
@severinfriedl 6 жыл бұрын
You have to put a 10k Pulldown Resistor to the pwm signal pin of the Arduino, so it won't turn on by itself when you connect it to your pc
@EpicSqu1rrel
@EpicSqu1rrel 6 жыл бұрын
you tested this? sounds like a good idea
@severinfriedl
@severinfriedl 6 жыл бұрын
@@EpicSqu1rrel Yes and it works like a charm
@diamondhands3426
@diamondhands3426 6 жыл бұрын
Hi Electronoobs, I'm so interested with the roller and the aluminum bar. May I know where did you purchased it?
@andremuensti4730
@andremuensti4730 6 жыл бұрын
BUGFIX at 7:18 Bugfix for the original EleksCAM software change the number format - decimal point from , to .
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
Andre Muensti wow. That's the bug? I'll try it! Thanks
@MrKimliv
@MrKimliv 5 жыл бұрын
Where do I need to change what exactly to fix the bug?
@TheRedmarlboroman
@TheRedmarlboroman 5 жыл бұрын
Hi, I am thinking to use this machine to engrave serial numbers to a made commercial PCB boards, have you tried it before ? thanks
@sokauo
@sokauo 6 жыл бұрын
Cool, but i plan to buy the first price co2 laser cnc laser cutter for arround 350 euros instead, because i think cutting is more usefull.
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
I wanted that but is 350 for USA. For Spain with shipping and all is almost 1500 :( and I don't have that yet.
@peterklein1299
@peterklein1299 6 жыл бұрын
Can I use this machine as a stamp rubber engraving ? If I use the appropriate settings can I make good quality stamps ? Thanks,,
@sanhelaserclayderman5811
@sanhelaserclayderman5811 5 жыл бұрын
dear, more information: Sanhesince2007@outlook.com WhatsApp / WeChat:+86 15729393963
@paulstaf
@paulstaf 5 жыл бұрын
So, were you ever able to use it for PC boards? You never did another video on it....did it end up sucking?
@samtema2437
@samtema2437 5 жыл бұрын
Hello Can the laser be installed instead of the engine in the CNC 3040 4 axis Router. Is the electronic circuit has a place to install a laser cable.
@donaldjohnson394
@donaldjohnson394 4 жыл бұрын
I,m building a laser cutter right now with a Elekmaker laser. Where do you buy the blue metal holder block at 4:53 in the video? I can't seem to find it anywhere.
@hudazulfiqar7847
@hudazulfiqar7847 4 жыл бұрын
Hi sir...I am also making this machine as my final year project...is the firmware already exist in benbox or we have to write it ourselves???
@carterconley636
@carterconley636 6 жыл бұрын
Hi, I bought a knockoff EleksLaser. - how do tell if it runs GRBL or Benbox? the PCB looks very similar to elekslaser's
@mcerelac
@mcerelac 6 жыл бұрын
Hi! I Have macbook pro, I can plug in and work with WebLaser, BUT I have some problems with specs, can u try to use with Software WebLaser? Thanks!!
@shelby50411
@shelby50411 6 жыл бұрын
Hi i have same machine just assembled it ..worked for 5 min but now wont move at all in y or x ...in benbox when i hit the manual move buttons a light flashes on main board somit seemms its getting signal from software but stepper motorscwont power on.....i can manually turn on laser...any ideas why steppers seem dead or no signal?
@SeamusMcNeil
@SeamusMcNeil 6 жыл бұрын
Hahah you sound like the rest of us mate " I want a cnc and laser cutter" wah wah wah ;) well that's what the wife thinks I sound like. Very nice video mate - thanks for sharing and all the best for your future projects. Cheers Jim
@sanhelaserclayderman5811
@sanhelaserclayderman5811 5 жыл бұрын
dear, more information: Sanhesince2007@outlook.com WhatsApp / WeChat:+86 15729393963
@SpeedFreak62
@SpeedFreak62 5 жыл бұрын
Nice video, the first one that do the steps one by one,
@acer2k1
@acer2k1 6 жыл бұрын
I hsve the same problem with elekscam. Manual movment and when you engrave no movement. This is a bug in the software. Make sure that your Windows have the Region. Englisch united states and it will work
@mohammadmarediya8774
@mohammadmarediya8774 5 жыл бұрын
Please sir contact number
@kevingamache1512
@kevingamache1512 5 жыл бұрын
Hi Where is the link for the manual? Thanks. Good video
@mickolesmana5899
@mickolesmana5899 6 жыл бұрын
so it can't cut? what kind of Affordable laser cutting CNC?
@tiagoaraujo1231
@tiagoaraujo1231 6 жыл бұрын
you can make plastic smt stencils with this laser cuter
@stephenworsley
@stephenworsley 6 жыл бұрын
Hey great video. I'd like to build a similar cnc machine. What sort of aluminium extrusions are being used here. And do you know where I could get the roller wheels. I keep searching but I don't know the proper name for them and so I don't get the correct search results. Many thanks
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
www.ebay.com/itm/Bearing-V-Slot-Plastic-Wheel-Roller-Pom-Ball-Nylon-Glass-Series-Cnc-Gear-Perlin/253317733067?epid=26011565454&hash=item3afae9dacb:m:mA2FJpWqfKaCP-RTXRYYnSQ
@cutflower36
@cutflower36 4 жыл бұрын
Can it engrave on metal?
@pir869
@pir869 6 жыл бұрын
good build description,good enough kit for a 2 axis laser,safety features are lacking a big carboard box might help more than the glasses(not being funny),or a 6mm plywood box with interlock micro-switches to cut power to the stepper driver board,super simple and the arduino nano can still accept the CAM files,most of these things need a bit of tweaking to make the thing you REALLY want it to be,a 3 axis might be more than it can support(flex/deflection of the axis support beams,though you could rebuild it with larger gauge box section. I want one,though i think my own build will get exactly what i want/need. Great vid,like with a BIG thumbs up dude.
@VicT992
@VicT992 6 жыл бұрын
Hi Im looking to add a drill like you mentioned 11:05 of the video. Whats it called? I've been trying to find one in a google search but have come up with nothing.
@hemantmundhe6662
@hemantmundhe6662 6 жыл бұрын
Nice video,I waiting for next video in pcb engraving & converting pcb milling machine.
@randolphsurrao5097
@randolphsurrao5097 6 жыл бұрын
Hello Friend, I need your help, please. I've just purchased a 2.5w laser module and want to replace my .5W laser module but the 2.5W laser doesn't switch on. I have a similar machine and motherboard to the one you have assemble in this Video. Any help will be much appreciated. Thank you, Randy
@ggsmkularathna
@ggsmkularathna 5 жыл бұрын
i have this machine too, can you guide me to proper setting for benbox software for engrave wood,
@130184100
@130184100 5 жыл бұрын
Can you please tell me if you try to cut plywood 4mm?
@sanhelaserclayderman5811
@sanhelaserclayderman5811 5 жыл бұрын
dear, more information: Sanhesince2007@outlook.com WhatsApp / WeChat:+86 15729393963
@1337-u5m
@1337-u5m 5 жыл бұрын
hey does it engrave the glass? and able to cut it ?
@ELECTRONOOBS
@ELECTRONOOBS 5 жыл бұрын
No. Power is too low and you need a different wavelength to cut transparent materials...
@1337-u5m
@1337-u5m 5 жыл бұрын
​@@ELECTRONOOBS Ohh okay, thanks for your answer.
@dandelikakhiladi8452
@dandelikakhiladi8452 5 жыл бұрын
I appreciate u r thinking.... by keeping fruit...
@wolfrobots118
@wolfrobots118 4 жыл бұрын
Very good video and damn you are good looking!
@denisinaga5149
@denisinaga5149 4 жыл бұрын
hello brother, for the application of the laser engraving machine, because mine has an error
@vishal01mehra
@vishal01mehra 6 жыл бұрын
Keep up love your content
@daskasspatzle2396
@daskasspatzle2396 6 жыл бұрын
How well was the banana engraved?
@jay.r8848
@jay.r8848 3 жыл бұрын
Good morning is this cash on deliver
@MCsCreations
@MCsCreations 6 жыл бұрын
Really nice, man. :) Is that banana a reference to Peter Sripol? LOL He has a HUGE laser cnc machine that he uses to cut foam, to make his rc airplanes. :D
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
Banana is just for scale LOL
@ChunkySteveo
@ChunkySteveo 6 жыл бұрын
But how do we know the scale of the banana?!! haha😂
@MCsCreations
@MCsCreations 6 жыл бұрын
Kkkkkkkkk
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
The banana is in the SI unit of scale. LOL
@ChunkySteveo
@ChunkySteveo 6 жыл бұрын
Electronoobs hahaha!
@nikossaramourtsis7888
@nikossaramourtsis7888 6 жыл бұрын
Hello , i have Eleksmaker A3 pro ,do i need to calibrate the machine? I have installed the program, I choοse the COM and the machine. , what do button set home and home? I can move the laser manually, but when I select the photo while it shows to the computer that it reads the design it does not move the laser at all. Could you help me? Thank you
@bysonderby
@bysonderby 5 жыл бұрын
NIKOS: I had the same issue, it was resolved by changing the decimal point in Windows. It has to be . and not , so us standard
@bysonderby
@bysonderby 5 жыл бұрын
NIKOS: I had the same issue, it was resolved by changing the decimal point in Windows. It has to be . and not , so us standard
@MkmeOrg
@MkmeOrg 6 жыл бұрын
Looks neat!
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
Thank you!
@pavankumar693
@pavankumar693 5 жыл бұрын
Can we use this to make bubblegram?
@arlindovmjr
@arlindovmjr 6 жыл бұрын
Does it cut wood?
@foxtrot1787
@foxtrot1787 6 жыл бұрын
can it cut through acrylic?
@rajchitrashala1912
@rajchitrashala1912 5 жыл бұрын
We can do thermocol cutting machine from this machine
@prashantsindhur
@prashantsindhur 6 жыл бұрын
Can you cut balsa wood and sunboard
@viedezerg
@viedezerg 5 жыл бұрын
love the banana for scale !
@pirateman1966
@pirateman1966 6 жыл бұрын
Danger Will Robinson, Danger...
@samirpasic6836
@samirpasic6836 6 жыл бұрын
How long you need to engrave that logo ??
@NoahGomezR
@NoahGomezR 6 жыл бұрын
I want to burn logos onto leather. What laser should i use?
@Acid_Ink
@Acid_Ink 4 жыл бұрын
Noa Gomez I have a 3 watt Insma engraver and it does leather really well. Usually anything over 2 watts would reliably do the trick.
@onicalewis8688
@onicalewis8688 5 жыл бұрын
Hey what's the difference between the 300mw to the 500mw
@texascharlie4554
@texascharlie4554 4 жыл бұрын
200mw
@laharl2k
@laharl2k 6 жыл бұрын
Not the best product but the design is super simple. I might make myself one of those based on this design but different as some of those parts are hard to find here locally or are too expensive even from china.
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
I bet is more fun to make your own! Keep up!
@pdsfpv1495
@pdsfpv1495 6 жыл бұрын
can you increase the size of the "print area" to 20 inch x 30 inch? i want to cut airplane design from flitetest
@PuspitaMuslimah
@PuspitaMuslimah 5 жыл бұрын
how to replace a laser with a drill...please
@Andreas-gh6is
@Andreas-gh6is 6 жыл бұрын
can the 2500mw version actually cut wood/thin acrylic sheets?
@abeedcactus3749
@abeedcactus3749 5 жыл бұрын
No
@edmundocasulla5597
@edmundocasulla5597 6 жыл бұрын
where to buy the drill bit?
@ufohunter3688
@ufohunter3688 6 жыл бұрын
Respect lasers or be blinded. Guaranteed.
@renskippen3523
@renskippen3523 5 жыл бұрын
I found the Eleksmaker now with a really good discount on Banggood: www.banggood.com/nl/2500mW-A3-30x40cm-Desktop-DIY-Violet-Laser-Engraver-Picture-CNC-Printer-Assembling-Kits-p-1003863.html?p=7I22079633188201703T
@gixuuuxd2005
@gixuuuxd2005 6 жыл бұрын
Looks Nice
@aztecwarrior4309
@aztecwarrior4309 6 жыл бұрын
Thanks
@patriciodavalos3259
@patriciodavalos3259 5 жыл бұрын
hey buddy, does this lazer goes through metal ?
@ELECTRONOOBS
@ELECTRONOOBS 5 жыл бұрын
No way!
@flpln6372
@flpln6372 5 жыл бұрын
@@ELECTRONOOBS but it draw on it?
@peeqwear
@peeqwear 6 жыл бұрын
can we cut leather or fabric?
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
It cuts very thin fabric. Won't cut leather, only engrave it! Maybe passing the laser multiple times..
@peeqwear
@peeqwear 6 жыл бұрын
Thanks for the answer
@HALAPINYO3
@HALAPINYO3 6 жыл бұрын
Hey what's going on buddy I was wondering if you can help me I have the same type of engraving machine I put it all together I have two different lasers but for some reason and nothing works it does nothing it doesn't move I don't know what I'm doing wrong I need help if you can email me or do something to help me I would really appreciate it
@agustinvarela8182
@agustinvarela8182 6 жыл бұрын
Qué pasó con el canal en español?
@omarpanels4772
@omarpanels4772 6 жыл бұрын
Hello Freud Podria hacerle una Consulta en español. Gracias por su atencion
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
Omar Panels dime
@omarpanels4772
@omarpanels4772 6 жыл бұрын
Buzco como poner un laser de mayor potencia. Pero quería consultarle. Gracias saludos
@sravan_ss
@sravan_ss 6 жыл бұрын
Price
@narayanlaldangichopra9973
@narayanlaldangichopra9973 6 жыл бұрын
I need rubberLaser engraving machine keet size 600mm*900mm Ho is Indin distbuter in India
@alisahu5399
@alisahu5399 5 жыл бұрын
hi friend , we are a factory of laser engraving machine , we have 9060 laser cutter , if you still need it , pls contact whatsapp 086 13294119385
@warialinth
@warialinth 6 жыл бұрын
By the way it's not 2,5W laser ..they are pretty all over the place. Mine measures only 900mW light output >..< EleksMaker needs to make something with their QC or stop lying about their products. Also you used the nuts on the swrews completely wrong way - they are supposed to grip into the acrylic ;)
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
Wow, I didn't knew that. :(
@rockbappino1354
@rockbappino1354 6 жыл бұрын
O wow
@couldnotfinduser9424
@couldnotfinduser9424 5 жыл бұрын
question why is there a banana just sitting there?
4 жыл бұрын
Those glasses are the minimum required. You should get better glasses. the orange ones.
@vickymcleod5244
@vickymcleod5244 5 жыл бұрын
What the Banana for ?
@martijn4740
@martijn4740 6 жыл бұрын
you know there is way beter software for that system then he one it comes with
@martijn4740
@martijn4740 6 жыл бұрын
Check out laserweb converted mine to wifi connection
@WilliamDeboer
@WilliamDeboer 6 жыл бұрын
wanted to share +Marco Reps video on upgrades to this machine. with a few changes this cnc looks to perform very well. kzbin.info/www/bejne/kKuyaqaher6krbs
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
Yes, nice upgrades!
@owenashby4572
@owenashby4572 5 жыл бұрын
is there anyway that I can download the software on my mac?
@sjager5891
@sjager5891 6 жыл бұрын
There's a elekscam auto fix tool, install and it will work wiki.eleksmaker.com/doku.php?id=elekscam at the bottom of the site. Or it doesn' t work because the weak light is still on
@garethronaldo8692
@garethronaldo8692 6 жыл бұрын
Nice ☺
@sohailasgharfba
@sohailasgharfba 5 жыл бұрын
hi bro can you send me its animation video and detailed drawing of this project
@cgellison
@cgellison 5 жыл бұрын
Engrave a disco ball!
@prathambhatnagar8653
@prathambhatnagar8653 6 жыл бұрын
Don't apply filter on videos it makes video look bad
4 жыл бұрын
If the software provided with the machine doesn't work ,I wouldn't buy the machine
@alfredoluisirala9331
@alfredoluisirala9331 6 жыл бұрын
Como hacer funcionar
@prathambhatnagar8653
@prathambhatnagar8653 6 жыл бұрын
Make a arduino self balancing robot...
@prathambhatnagar8653
@prathambhatnagar8653 6 жыл бұрын
Please make it
@KarimBab
@KarimBab 5 жыл бұрын
Why bananas 😂
@fdmckenzie
@fdmckenzie 5 жыл бұрын
Karim Bab I'm guessing for size comparison?
@nagarjunupadayayula8513
@nagarjunupadayayula8513 4 жыл бұрын
Can we engrave clothes by this machine
@stevenA44
@stevenA44 2 жыл бұрын
I have the smaller one. Will you PLEASE tell me WHY you have a banana in all your videos???????
@soumyasudhi9384
@soumyasudhi9384 5 жыл бұрын
Can engrave my photo
@bethisway
@bethisway 6 жыл бұрын
Lolz
@Ezq95
@Ezq95 4 жыл бұрын
I wonder why the makers of theses machines can't add in instruction manual with the machine. It pissed me off. I have a different one that looks similar and I don't know the model number. S.o. b. Come on man. Bad review from the start.
@AxelWerner
@AxelWerner 6 жыл бұрын
Again bangood Advertisement?!? Guess I need to unsubscribe then. I'm not here for Teleshopping
@laharl2k
@laharl2k 6 жыл бұрын
Axel Werner Well the machine is quite simple. Its not like you cannot buy the components separately and build something similar yourself. The angle brakets could easily be 3D printed and the rest bought or replaced. An arduino uno + cnc shield could easily replace the main board.
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
That's true. The first machine you see in the video, the red one is homemade.
@ELECTRONOOBS
@ELECTRONOOBS 6 жыл бұрын
The company that helps my workshop shouldn't bother you. I show you the machine and I really wanted this one for my future projects. If you want to buy it using any other shop is your choice. If you are not here for my videos, I'm very, very sorry to hear that. Have a nice day.
The Cheapest Laser Engraver On Amazon
11:07
Andy Bird Builds - CNC
Рет қаралды 1,2 МЛН
Important upgrades for the EleksMaker PCB laser CNC machine
7:40
This dad wins Halloween! 🎃💀
01:00
Justin Flom
Рет қаралды 64 МЛН
When mom gets home, but you're in rollerblades.
00:40
Daniel LaBelle
Рет қаралды 136 МЛН
Human vs Jet Engine
00:19
MrBeast
Рет қаралды 191 МЛН
Which team will win? Team Joy or Team Gumball?! 🤔
00:29
BigSchool
Рет қаралды 14 МЛН
20 Laser Engraving Blanks From TEMU and How to Price Your Work
22:29
Laser Engraving 911
Рет қаралды 243 М.
Cutting mirrors with Diamonds
19:13
Breaking Taps
Рет қаралды 1,1 МЛН
No More Cables? This Soldering Iron Changes EVERYTHING
11:08
Electronoobs
Рет қаралды 30 М.
Product Overview - EleksMaker A3 Laser Engraver
25:13
Robert Cowan
Рет қаралды 347 М.
Banggood 3018 Mini Cnc Router Kit Build, Test & Review
22:19
techydiy
Рет қаралды 1,4 МЛН
Eleks Maker Desktop Cam Software Walk Through
16:41
CPU modder
Рет қаралды 46 М.
Ortur Laser Master 2 - 20W Engraver. Build, Test & Review.
31:15
techydiy
Рет қаралды 1,2 МЛН
Homemade PCBs with Fiber Laser - 0.1mm Clearance
44:57
Electronoobs
Рет қаралды 286 М.
This dad wins Halloween! 🎃💀
01:00
Justin Flom
Рет қаралды 64 МЛН