Laser Engraving and Cutting on Acrylic Mirror - DIY Project Walkthrough - OMTech

[@JoeGator23]

5:51 "It looks beautiful and it looks like my dog approves, too." * Dog winks and gives the nod. Too funny, thanks for the video.

[@omtechlaser]

Thank you for your feedback! We are happy to hear you enjoyed the video!

[@lanygeldenhuys4982]

Thank you so much!

[@trin1gyal]

VERY NICE!!!!

[@omtechlaser]

We appreciate the kind feedback!!

[@oldstuffcalban]

AAAAHHMAZING WORK !!! Thanks for a great video!👍

[@omtechlaser]

We appreciate the kind feedback!

[@BloxiYouTuber]

Well this video answered a argument between the wife and I. Now I gotta go apologize lol. Great video

[@StePhillips]

Great video. I'm waiting on some mirrored acrylic to arrive. I did some tests on two tone (multi layered) acrylic samples. Unfortunately, you could see lines in the filled areas. Is it likely that I'm running it too slow/strong? Any suggestions would be very welcome

[@oscarcanales5888]

This is such a great video 🙌🔥👍! Love it man 👍!

[@omtechlaser]

Thank you! We're glad you enjoyed it.

[@fredygabuardy546]

Hi , I love this video! If’s not too much to ask, where did you buy the mirror acrylic sheets?

[@gamingustaad6433]

Can I cut golden acrylic using diode laser?

[@n.r.4269]

Not possible

[@oushnabulloram5285]

hi, i would like to know how were able to add that camera screen on the left. is it in the laser or its something else that you have added.

[@ljay1977]

Are you using a diode laser cutter?

[@mariclermarquezcastro]

hi! Which smaller machine do you have to cut mirror acrylic?

[@SanaasKitchen]

Same question

[@Saphirthecat]

Good morning I bought a Polar Omtech and I would like to engrave first names with very fine writing on my gold acrylic which is 3mm thick, what setting to make on lightburn? Thanks for your help

[@StePhillips]

Did you work out some good settings I can test? Recently bought a Polar but have mainly used it for cutting and hoping to try engraving again next week. I tried on some two tone acrylic but had lines in the filled parts. Maybe I ran it too slow/strong? Also, air assist on or off? Any help would be much appreciated

[@Saphirthecat]

​@@StePhillipsI just brought the laser manually closer to the plate

[@bbnlabs]

Great video. What will be a good machine to buy for acrylic and wood. I'm in Canada. Pls suggest.

[@omtechlaser]

Hi, we really appreciate your interest in our product. Our c02 laser will definitely get the job done! However, we do recommend contacting us and speaking with our live sales reps. They are very knowledgeable and can definitely assist you with picking out the perfect unit to fit your needs. Our sales team can be reached at [phone] during the business hours of 8:00AM - 4:30 PM PST Monday-Friday.

[@Randomdudeinamerica]

how do you cut without getting poor edges. The grey back gets slightly burnt and causes hazing on the clear side.

[@Randomdudeinamerica]

power 10 -15 mA, 2 pass, speed 12mms, slight air assist, what am i doing wrong

[@omtechlaser]

@@Randomdudeinamerica Hey there! We apologize for the delay in response. We recommend contacting our tech support if you haven't already done so. Please get in touch with us at [e-mail] we're also available by phone at [phone] during the business hours of 8:00AM - 5:00PM PST Monday-Friday. We appreciate your business!

[@sonjasawyer3657]

I have a 50W and used your settings on mirrored acrylic, but not getting the same results. It seems to burn the edges and not cut through all the way. Any suggestions would be appreciated.

[@omtechlaser]

Great question! Feel free to message Max here: instagram.com/laserbeastlab/. :)

[@frederickcruz565]

Maybe your machine is not aligned!! Try doing the correct alignment, that’s happened with my machine

[@PotatoesRnice]

Did you figure it out? What was the problem. I'm having the same.

[@amysep]

I buy Houston acrylic too, I didnt know I could cut with the plastic cover on, omg does that protect it from getting the laser marks? 🙃

[@omtechlaser]

Great question! Feel free to message Max here: instagram.com/laserbeastlab/

[@I-LOVE-EARTH]

Can you autofocus from Lightburn?

[@maddiej2204]

This is awesome! How did you get the photo of just your dogs face?

[@omtechlaser]

Feel free to ask @laserbeastlab on Instagram!

[@Juliet2194]

Hi, I've tried cutting with mirrored acrylic however it continues to burn/melt and produces a flame. How can I avoid this?

[@omtechlaser]

Our techs will be more than happy to help answer all your questions. Please contact us at [e-mail]. We are also available by phone at [phone] during the business hours of 8:00AM - 5:00PM PST Monday-Friday. Thank you for your support.

[@TheAtwani]

Posso avere il nome o la marca della macchina laser ,grazie?

[@vashonejordan]

Nice. Where did you get the acrylic mirror from?

[@omtechlaser]

Our user, Max, gets his material from Houston Acrylic!

[@ВолодимирВолер]

Hello, friend! Could I do this by diod laser Atomstack x20 pro?

[@sukoriiwassea]

hi.may i know what power setting do u use to engrave and cut mirror acrylic?

[@laserbeastlab3092]

For my 55w I use 150mm/s at 20% power for engraving, 12mm/s at 40% power for cutting

[@06_farhanhakimulfadhli82]

Can i cutting mirror acyloc with diode laser?

[@n.r.4269]

Not possible

[@elainehudson3694]

Sorry spelling WHICH LASER MACHINE

[@n.r.4269]

Co2 laser

[@johnzill2125]

I am looking to purchase my own laser. I use a Rabbit at Winston Salem MiXXer maker space; but want my own machine. Which model was used, and what options to produced these result. The produce and samples looked great

[@omtechlaser]

Hey there, thanks for reaching out and showing great interest in our machines!! The individual in this video, Max, currently owns a 55W Mid-Range CO2 model. He covers a lot in this video. but you can always reach out to him on Instagram @laserbeastlab

[@elainehudson3694]

Which kaser bachine

[@MrFravy]

is posible to do the same with diode laser?

[@n.r.4269]

No