Hi, thanks for watching our video about Laser Engraving In this video we’ll walk you through: Aufero Laser 1 Making Wood Signs LaserGRBL Laser Engraving Full Tutorial For Beginners Link To Laser GRBL Download lasergrbl.com/...
Пікірлер: 67
@Alyssa_20043 Жыл бұрын
Very interesting to see how you actually do it and how much thinking and effort there is going into it
@dzejem-qe9oj5 ай бұрын
Very practical tips, especially how what ideal values can be set and good advice for fine lines. Thank you!
@aieeejo Жыл бұрын
I think this is probably a great video. but if it's possible for you to re-record the audio it would help a lot. I have very slight hearing loss (but it's way below hearing aid necessity) and with my volume all the way to max, in a quiet room, I struggled to hear you. TBH, I left after about 2 minutes. I applaud your efforts to introduce this software to us newbies, though. Thanks.
@LaserEngravingProfessor Жыл бұрын
Thanks and sorry the Audio is not the best I can turn up audio and upload a new video
@geriburke17139 ай бұрын
Thank you for taking the time to record this. I'm just starting out (xmas gift from hubby) and this video was very helpful.
@mikewindham69307 ай бұрын
Please increase the sound. Great looking posting with good info, but the audio is too low for me to hear. Thank you.
@LaserEngravingProfessor4 ай бұрын
Sorry about that
@Rylan_Jeffrey_ Жыл бұрын
Great vid!!! Just started and found this helped a lot
@LaserEngravingProfessor Жыл бұрын
Glad I can help
@Story_Fuel8 ай бұрын
thank you soooooooooooooooooooooooooooooo much u saved me today really
@LaserEngravingProfessor8 ай бұрын
Np thanks for watching🙂
@Story_Fuel8 ай бұрын
@@LaserEngravingProfessor i have kentoktool 400. Will I get good use out of the laser that comes with it? I am only doing bookmarks at the moment. Also, I can't find any videos on how to just set the laser for cutting around a shape around. I'm trying to cut plywood about 2mm thick. thanks
@LaserEngravingProfessor8 ай бұрын
I don't know a ton about cutting but that laser is a good one for doing so at that thickness I belive you just pick a shape then make it do multiple passes until it cuts through turning the power up might speed that process up I would play around with it tbh and see what works best for you@@Story_Fuel
@patgray54022 ай бұрын
Why does my lasergrbl not look like this? Mine is a grid with 4 quadrants, not a blank tan canvas.
@LaserEngravingProfessor2 ай бұрын
@@patgray5402 it’s the new update I like the old version
@dennisbarney86910 ай бұрын
I use inkscape and lazer grbl and a sculpfun s9 engraver when i go to make a circle in inkscape all is well BUT when it shows up in grbl the circle is NOT closed it leaves abut 1/8 open and un cut on s9 any ideas would be well appreciated 99% of circle is perfict just wont cut all the way and i can see the open in grbl thanks
@kernowcoinringscornishcoin3999Ай бұрын
Hi im trying to setup a rotary module to my p7 m40 atomstack with laser grbl any ideas as the settings for this
@amoreyjones565 Жыл бұрын
I cant get my laser to connect to my computer but i see it in the port in device manager.
@LaserEngravingProfessor Жыл бұрын
Make Sure everything plugged in and Connected Well
@amoreyjones565 Жыл бұрын
com port 3 appears when I plug in the laser I set the baud to what it is in divice manager and still no connection.
@LaserEngravingProfessor Жыл бұрын
@@amoreyjones565 Well I have never seen that problem I just plug it in and hit the lightingBolt and done
@amoreyjones565 Жыл бұрын
Ok
@تعلممعي-غ6ق11 ай бұрын
Click the power switch in the board of the laser
@RAIN.-.-. Жыл бұрын
Interesting video and thanks for the tutorial
@LaserEngravingProfessor Жыл бұрын
Np thanks for watching
@Jason-zh7fz8 ай бұрын
Mine doesn’t have $27, $30,$32 and many more. How do I fix this?
@midianalbertokhaiyow8195 Жыл бұрын
thanks for the video. One question, I have a cnc3018 machine with laser and spindle, when I use laserGRBL and I want to use the laser, the spindle also turns on, how can I disable the spindle?
@LaserEngravingProfessor Жыл бұрын
I think everything connected to the device with LaserGRBL on it will moved you might need to find a way to unplug the spindle from the device I don't know anyways to do that on the software
@midianalbertokhaiyow8195 Жыл бұрын
@@LaserEngravingProfessor Thank you very kindly for your answer. I have another question. Can the focus button be modified? Well, when using it, the laser is very strong and burns. Is it possible to lower the power at the command of that button?
@kernowcoinringscornishcoin39993 ай бұрын
Hi in laser grbl software when I attempt to jog the y axsis the x axsis moves in stead I've checked aii wiring is correct any ideas as to why this would be happening
@LaserEngravingProfessor2 ай бұрын
@@kernowcoinringscornishcoin3999 you can try reinstalling the software but then you’ll have to re-enter your settings I could try to find another fix for you
@tinalloyd825411 ай бұрын
how can you remove an image if you decide not to us it and want to change it to a different image? when i uploaded a new one it just went overtop of the original one
@LaserEngravingProfessor11 ай бұрын
press file open file then pick your new image
@aztecwarrior1421 Жыл бұрын
I am trying to engrave wood model airplane ribs to the actual size . What i been doing is taking a pic of my part and sending it to my email, i then move it to my desktop and then move it to the GRBL screen. This has been working so far for other projects. But i need to engrave the exact size of the original. Any suggestions?
@LaserEngravingProfessor Жыл бұрын
Sorry I'm not sure I wish I could be more help hopefully it works out sounds cool
@karenkluge371511 ай бұрын
Hi, after I save a project can I modify the parameters? Like size or amount of lines.
@LaserEngravingProfessor11 ай бұрын
click file and reload last file then next
@karenkluge371511 ай бұрын
@@LaserEngravingProfessor thank you sooo much, I have been struggling with this for a long time.
@allabouthim0310 ай бұрын
Can I create text in this program?
@LaserEngravingProfessor10 ай бұрын
i suggest using befunky.com and importing to LaserGRBL for text
@alpha-gummybear118410 ай бұрын
Anyone who uses the Rotary Axis on the LaserGRBL? How to set the roller speed by LaserGRBL?
@homesteadcookingwiththeski3852 Жыл бұрын
Cool video
@pauljones34738 ай бұрын
Not sure why the comments avout the volume. Seems fine too me???
@alandobb950Ай бұрын
You probably dont have a hearing condition like @ieeejo has, he says he has VERY SLIGHT HEARING, so needs volume to be HIGH.
@DayDay-ik7kl10 ай бұрын
Am probleme cu programul grbl..... Nu îmi afișează poza la gravare ..... Îmi arată doar lini
@NHGeneral8 ай бұрын
I have a problem that sometimes the board is disconnected, I don't know how to resume because after I connect the board, it lost it's zero position. Anyone have this experience please help!
@LaserEngravingProfessor4 ай бұрын
I'm posting a video today that will hopefully help you
@NHGeneral4 ай бұрын
@@LaserEngravingProfessor Thank you, I actually found out the cause, the PCB just overheated, so I use fan to cool it down while engraving and it's all good now.
@LaserEngravingProfessor4 ай бұрын
@@NHGeneral glad you figured it out sorry for the late response
@altinaxinisile853111 ай бұрын
Hi I struggle to upload files please help.
@LaserEngravingProfessor11 ай бұрын
What seems to be the problem
@davidyoung633311 ай бұрын
I CAN'T HEAR YOU!
@LaserEngravingProfessor4 ай бұрын
I'm posting a video today that will hopefully help you
@waterlilly62lori7 ай бұрын
I'm trying so hard to follow, but you do not articulate well and you skip around so much.
@LaserEngravingProfessor4 ай бұрын
Posting a new tutorial later today it will be much better
@cornishman1954 Жыл бұрын
can not hear you very well good video🔊📢
@LaserEngravingProfessor4 ай бұрын
My new tutorial will have better sound
@GigaVids8 ай бұрын
your audio is so low i cant hear anything
@LaserEngravingProfessor8 ай бұрын
Sorry about that
@nicknorris1008 ай бұрын
Ny volume is at 50 on my phone... and i can hear him fine. You may want to watch a tutorial on how to adjust volume on your device
@GigaVids8 ай бұрын
@@nicknorris100 That literally means nothing tard, I'm looking at the source volume on my pc it's 30% lower then everything else on YT.
@LaserEngravingProfessor8 ай бұрын
it's not the first time I've heard this complaint my next video I will try harder to make everyone happy @@nicknorris100
@KrisLoduca-h3d19 күн бұрын
Meredith Club
@haythamabdel-qader69344 ай бұрын
the most useless tutorial I've ever seen, absolute trash.