LASER problem RICOH Aficio MP2501 MP2001SP UNIT replacing polygon

[@HiwaaOthman-eu7vj]

كيف علاج كود ٢٤٠ ٠٤ ريكو ٤٥٠٣ بالفيدو wat isthe treatment 240 04 ricoh 4503 vido

[@MrRicoh]

You have to cleanh the copier, or Replace the LD unit.

[@HiwaaOthman-eu7vj]

@@MrRicoh thank you

[@MrRicoh]

Good luck

[@prabhatpatel327]

Error 322 in 2501L, what's the problem

[@MrRicoh]

Hi. I will be happy to help you. The sc322 error in the Ricoh MP2001 MP2501 means you have a problem with the laser. You can gently clean the Polygon Totor Mirror AX060420 or replace it with a new one if cleaning does not help. Alternatively, you can buy the entire Laser Unit D1581961 OPTICAL HOUSING: ASS'Y. 💥💥💥 Join supporting my channel: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin 💥💥💥

[@almanzortv_82]

i have my ricoh 2501 the problem is when copiying is to light what is caused.

[@MrRicoh]

Ricoh MP 2501 copier is a simple structure. If the copies are clear then: - replace the developer (always 60,000 copies) - replace drum, cleaning blade and charge roller (always every 60,000 copies) - clean the scanner section - if the first copy is dirty from the other side, it is a symptom that you have low quality toner, so don't use it, just put in the original toner. Original toners for this Ricoh model are very cheap.

[@prabhatpatel327]

Another 2501L machine, matter is not print. A blank page come out.. Development joint is ok. Developer is not too low Drum, charge roller, blade repalced PCU gears is ok. If LD unit creating issue, have replaced another LD UNIT, BUT, nothing changed. Page is blank with some developer on page. Is this PCU Problem or Laser unit problem.

[@MrRicoh]

This indicates a developer problem. I don't know how you can check the dewloper level? You wrote that the developer is in the right amount - there is no way you can check it. Empty the old developer and pour out the new developer. This is the solution. 💥💥💥 Join supporting my channel: kzbin.info/door/OHtXTtGHj33pUm8Gf2FH3Ajoin 💥💥💥

[@prabhatpatel327]

@@MrRicoh on old developer, toner image on drum should be create or not. It will be surely too light But i think image should create. Another confusion is that developer T28 (B1219640 for india ) work with 2501L or fully not work?

[@MrRicoh]

In this copier model, I only use the D1589640. I used to try TYP-28 but had problems. Take out the magnetic shaft and check 5 gears.

[@radhakrishnastationery1296]

sir the same as above video , i tried cleaning the laser glass, the problem has been solved but iam able to see the horizontal white thick line and the images r disappereared in that particular line, can u tell what is the problem ?

[@MrRicoh]

Take out the Charge Unit and clean everything, it should help.

[@radhakrishnastationery1296]

@@MrRicoh do u mean charger roller?which is present near the drum ??

[@MrRicoh]

Radha krishna Stationery yes

[@radhakrishnastationery1296]

@@MrRicoh hi sir, after cleaning it i can still see white lines now its more than 3 lines i can see in whole print, plz help me out with this problem sir ?

[@MrRicoh]

Now check the mirrors in the optics section, but cleaning the laser glass should help.

[@asmatullah2266]

Sir I have Aficio MP 305spf which has the problem of SC-220-00 kindly make a video on it or tell me the problem's solution by replying me

[@MrRicoh]

Hi. Just replace the laser.

[@pkmarketingvijayakumar7515]

Sir please send video for Ricoh 2001L toner supply Full unit replace

[@MrRicoh]

kzbin.info/www/bejne/aJawin95e9Othc0