Set Up A Fiber Laser Rotary Tool with EZCAD | COMPLETE GUIDE

[@LaserEverything]

Stepper Motor Snobs: I know pulse rev != steps - I'm just trying to explain it in a way that makes sense for beginners. You can skip leaving the hate mail below.

[@LaserEverything]

You got it dude!

[@TeknisiDeprintz]

how to deal with a rotary that won't turn, even though the rotary can turn on??

[@jonathankerner2094]

getting ready to use this highly recommended video. I like your answer here . . . speaking as a beginner I'm GLAD you use this approach. Nothing worse than ASSUMING your audience "knows what you mean."

[@juniorjoe05]

Bro thanks a billion for this video. I've had my engrave for almost 2 years now but have never done any successful rotary marking. This video was just exactly what I needed. You're a life saver. Thanks to you I've successfully engraved my first cylinder ❤❤

[@michalantos8793]

I'm new to Dremels, but this thing has been great. kzbin.infoUgkxfPgcZ5_Cl0HDUKkMJAKde11YKQZVgMoR The variable speed is awesome and the cordless aspect makes it so easy to work with. I am constantly finding uses for it that make tasks easier. Recently I put in a new deadbolt on one of our doors. I knew I had to enlarge the hold where the deadbolt goes into the door frame. At first I thought I would have to get a big router and figure out how to use it for that, but then I rermembered we have the dremel. I was able to enlarge the hole almost as easy as if I was drawing with a pen. It's also great for grinding our dog's nails done and so many other household tasks.

[@LaserEverything]

Thanks for watching!

[@HeadLifeMedia]

Your videos kick ass. I'm one week into my laser experience, and because of you, it's been pretty smooth sailing. Thank you!

[@LaserEverything]

I'm so glad to hear that you're getting value out of the videos, thanks for watching! Glad to have you around!

[@mikekleinschmidt3671]

After almost 2 years of putting off using the rotary attachment because I didn't know how to make it work, this video helped me finally get it working. Still have some engraving settings to tweak. Thanks for making this available!!

[@LaserEverything]

Wow, glad to hear it 👍 thanks for watching

[@traviso1413]

Helpful video just like all of your videos. Your channel has helped me out big time at getting the hang of learning the fiber laser. Your settings at least put me in the right corner of the spectrum and are not far off from my machine. I’m glad you are open about all your settings and are very helpful. Most ppl don’t want to share settings or give help for free they act like they have the fiber process patented like it’s a huge secret lol. But what you are doing is very generous and helpful for people starting out. You are really helping build the laser community and I wish you the best of luck with your channel. Thanks!

[@LaserEverything]

Thanks for watching Travis! Glad you're getting value out of it!

[@shadowliving6858]

This was so helpful. I don’t have a rotary tool yet but this took all of my trepidation out of the fear and trembling box and I’m confident that I can do it now. Great job Alex.

[@LaserEverything]

Wonderful! You're going to do great!

[@KatErmant]

this is insanely helpful. The chinese laser at my job has no information on any of the documents but it has the same rotary tool. I'm excited to fire it up, and i feel confident to get started

[@jonathankerner2094]

Ok - first watch, and will take your watch again advice. We'll be setting things up to engrave hopefully next week.

[@SaltyKracker3448]

Hello videos have been great help. I have ran into an issue under rotarymark when I hit Light it will light but can never back out of it have to end task in task manager. If I hit mark the red laser outlines and rotary moves but not marking

[@LaserEverything]

Hit the escape key to exit 😊

[@lasermark596]

Very helpful vdo. I’ve a rotary but never try to engrave. Hope i’ll learn from u time to time.

[@LaserEverything]

Glad it helped! Thanks for watching :)

[@tienievanrooyen1580]

Thank you so much for the video it will definitely help me a lot you explain it good but sort so you don’t get bored and fall asleep greatly appreciate your work

[@LaserEverything]

No prob glad you like them so much!

[@PatriotCoinRings]

You don't happen to be in So Cal are you? I'd pay you to come down and train some of my employees. I absolutly love how you are so thourough in your explanation because despite being a craftsman of many trades and tooling, in my retirement now I own a jewelry shop and purchased a really expensive unit only to find out just what a big learning curve it is to do basic engravings little lone the things I want to do beyond just jewelry (I also want to do knives and gun parts) and find your videos amazing. This rotary setup is fantastic, I don't suppose you have one on engraving rings do you? Settings in EZCad2, etc? If not, maybe in your next video but thank you and please keep the videos coming in!

[@LaserEverything]

Rings are on my short list for early 2022, just got my ring rotary in. I'm in upstate NY so that's a bit of a drive lol but may be offering like consultation and coaching calls next year. Recorded sessions or something idk yet. We'll see. In the meantime have your employees join the discord and just keep an eye on the channel. Request episodes as needed and consider joining the Laser Master Academy masters.lasereverything.net

[@billjohnson69]

Thank you SO MUCH for making this video! I got the same rotary and have been procrastinating setting it up. Going to watch the video tonight and set it up tomorrow!

[@LaserEverything]

Good luck, have fun!

[@Proven88]

I have been so intimidated by the rotary, but with this video and lightburn, I was able to get up and running almost immediately and engraved a bolt-action pen for someone for Christmas! It isn't nearly as hard as I expected.

[@LaserEverything]

So glad to hear it helped you. Thanks for watching!

[@sparksclinton4065]

Hellooo Thanks for a hundredth time ! This Video taught me a lot, to have my rotary running ! I have issues with Split lines, as in after engraving every section, theres a distortion line in between as it engraves, please how do i get rid of them ? Could it be because my part diameter isn't Accurate ? Thanks

[@sparksclinton4065]

i had same issue too

[@ScottRedstone]

I think I’ll buy laser and rotary tool together. Well done video.

[@LaserEverything]

That's a good way to do it. Thanks for watching!

[@DimensionMachine]

I am about to buy a rotary for my fiber. this is going to be super helpful. Thanks for taking the time to make this video!

[@LaserEverything]

So glad it helped you out!

[@MisterFizz]

At 12:55 - did you download a bunch of parameter library settings from somewhere? You have a lot. My EZCAD had only a single entry: "DEFAULT".

[@LaserEverything]

Yes those are from our LMA supporter library. You can find them over at masters.lasereverything.net/

[@terryclair2914]

Thanks for all the HELP!

[@LaserEverything]

Happy to help! So glad you're getting value out of it :)

[@masagencyadv7412]

Great video, it helped me a lot in putting the right value To rotate the motor by table and switches with the correct value thanks a lot Mohamed from Egypt

[@LaserEverything]

Glad it helped Mohamed!

[@georged8046]

Great advice on the hatch direction. I imagine the split size will really depend on the curvature of the object and the depth of focus of the installed lens.

[@LaserEverything]

Great point! Definitely can go down the rabbit hole on "what's best" for each specific situation. Definitely wanted to keep things simple for people just getting started but I'm really excited to explore the nuances of all this on the channel down the road!!

[@JackInTheShop]

I have had the tt fiber laser for about 4 months. Just not getting the rotary out and set up. Thank for the video.

[@LaserEverything]

You got it :P

[@machine2747]

Awesome video. I still refer back to it when doing rotary as a reference. Great work!

[@LaserEverything]

Cool, thanks! Glad it helped you!

[@K20ChargedMini]

so helpful.... first day unboxing my rotary tool... at least its a starting place to get a mark! nice one!

[@LaserEverything]

Glad it helped you!!!

[@charlvanrhyn5089]

Thank you Alex,I am totally new to this.Bought a 50 w JPT and inn the process of joining your site.

[@LaserEverything]

Amazing! I hope it works out for you. Let me know if you need more help. Don't skip the "beginners playlist" on the main channel page!

[@reviewman9701]

Thank you for the video. Very helpful. Time to dust off my unused rotary and start marking. I appreciate the info 👍🏻

[@LaserEverything]

Glad it was helpful! Thanks for watching!

[@vincentlee2460]

At video 6:44 use the arrows keys mean "up" and "down" keys to center the line to the rod? Or did you use the "left" and "right" keys? Thanks

[@LaserEverything]

It depends on the orientation of your tumbler and the rotary tool, so it will change depending on the project.

[@overthalineproductions270]

Soooooo fkn. Cooooool! This stuff is so high tech & you do a really great job of explaining it where a simple man, like myself can understand it. I have absolutely no business with a laser of any sort……. But it’s soooooooo coooool, I’m just fascinated & in love with it! So I ordered one!!! A Chinese 50w / JPT - Fiber laser w rotary & Ezcad2. It just shipped today, so not sure when I’ll actually get it. However, when I have it in hand, I’d love to retain you to video conferences & get some LIVE help. Your videos are AWESOME & I’ll DEFINITELY be leaning on them a lot! But I KNOW it’s easier to stay out of trouble than to get out of trouble!!! I want to do it RIGHT & avoid as many mistakes as possible!!! Cheers!

[@bel31670]

Super helpful video. Once again you have helped me out.. thank you soooooo much..

[@LaserEverything]

You are so welcome!

[@lasermark596]

Really really cool. It will help a lot. U rocks. Hope one day i’ll meet u😊

[@LaserEverything]

Thanks for watching!

[@joebastulli]

Yay! Was having issues setting up a rotary. Nice Guide!

[@LaserEverything]

Sweeeeeet! Hope its working now!

[@ArkansasChainsaw]

thank you had to use rotate text mark on mine but works perfect thank you for the help

[@michaelpunaro5594]

Thanks Alex, very helpful. Keep up the good work.

[@jameswares4469]

Thanks that has helped me 👍

[@LaserEverything]

Glad to hear it! Thanks for watching!

[@candra70a]

Nice explaination.. can i have your library for setting power, Hertz ? Thx

[@LaserEverything]

masters.lasereverything.net/

[@ojaswellness832]

thank you

[@LaserEverything]

Welcome!

[@napoleoncallesramirez8832]

Eres una maquina, muchas gracias

[@LaserEverything]

Thanks for watching!

[@cappiekillmore7754]

THANK YOU!

[@LaserEverything]

You're welcome! Thank you for watching :)

[@printingcart5889]

Hello Alex, Can we engrave Champagne Glass with this Rotary ?? Thank you man

[@LaserEverything]

I'd say no, the giant metal chucks put way too much pressure on glass to hold them and end up shattering the glass. Check out a roller rotary or something like the new PiBurn Grip if you want a chuck.

[@Tinusopbeeld]

My man, really amazing videos and great help!

[@LaserEverything]

Glad you like them, thanks for stopping by!

[@Just_An_Idea_For_Consideration]

Excellent Info!!! Thanks!

[@LaserEverything]

Glad it was helpful! Thanks for stopping by, hope to see you again!

[@avitolourenco]

taughts on lightburn vs EZCAD?

[@LaserEverything]

You can't compare them. They're different tools for different jobs. You can't use lightburn on galvo laser machines that operate with ezcad control boards. Lightburn is higher quality software but it's irrelevant since they work with specific controllers. No use in comparing them.

[@avitolourenco]

@@LaserEverything noted

[@rolandmartin763]

Thanks for your Time explain that to us. I am new at Fiber Laser so i need as much Input as possible

[@LaserEverything]

Glad to help

[@andyoohhh2061]

Great video!

[@LaserEverything]

Thanks for the visit!

[@mariettetedem2713]

Your videos are so educative. For a complet newbie like me this video on the rotary tool was just a game changer, i had been having a problem with my rotary but after watching the video and following the steps everything just fonctions perfectly. Guys like and susbcribe to this channel. Definately a game changer

[@LaserEverything]

Great to hear! Thanks for watching!

[@mattjasonroble6230]

Thank you so much bro

[@LaserEverything]

You got it Matt! Thanks for watching!

[@Tobelemke]

Great video, well explained, thank you!!!!

[@LaserEverything]

Glad it helped you!!

[@boostandrumble]

can you do rings on that rotary?

[@LaserEverything]

You can and we'll have an episode on that soon!

[@myautosmart]

Thank you!

[@LaserEverything]

You're welcome!

[@karifischer1]

Hi, we love your videos. When following along we noticed we don't have any of the add ons for the laser dropdown tab. There's only three selections in there but nothing for rotary. We have ezcad 3. Can you help us out on what to do? Please

[@LaserEverything]

Ezcad 3 doesn't have the same plugin support ezcad 2 does. What you need to do is head into F3 Param, find the Extension Axis section and activate the A axis, the mark/light area of the screen at the bottom will then have the rotary settings you're looking for.

[@redcardlk]

Grate work bro....

[@LaserEverything]

Thanks ✌️

[@pablovargas5758]

Thank's so much!!! Just like i needed!

[@LaserEverything]

Glad to hear it!

[@kmyerslp85]

Just to add to the guide because it wasn't talked about. At 9:20 mark the mug wasn't fully seated against the chuck and will vary the engraving quality greatly because the level/distance will change as it rotates.

[@LaserEverything]

Good eye!

[@kmyerslp85]

@@LaserEverything Receiving my machine today, already went through 7 of your videos to see beginner guides. Lots of help. Thanks. ^_^

[@bryanharness1122]

I was about to say same thing. Couldn't see anything else lol. Great vid man. Looking to add one of these to my machine shop

[@alshuwaikhee]

Dear friend I’m watching your blog for longe times I’m really learn from you i wild like to thanks you for all information and all hard work . If you can tell me witch machine its good for birds rings, and witch sources it’s perfect for birds rings .

[@LaserEverything]

30 or 50w Mactron JPT would do great, there's links in the description.

[@unounv]

Great channel! Learning a lot. Thank you. Subbed

[@LaserEverything]

Welcome aboard!

[@zelje999]

Hello. Greate video, but I have problems with switches, everything is lockd in machine. What now? Regards, G

[@zelje999]

you have answered. Thanks.

[@LaserEverything]

Gotta open it up! If you need help join our discord server: discord.gg/hKtTBGcU

[@josierally]

I’m so late to this video. But better late then never. Just got a 30 watt fiber laser and wanted to know if this machine with the power controller box is all I need I don’t have the controller inside the laser. But someone was telling me I need a stepper driver and the rotary is this essentially the same thing?

[@LaserEverything]

The external box should include a driver in the chassis

[@ramitsangal2397]

Hi can you please tell me what you have done at 10:32

[@mandycepe]

Hi!!i follow ypur videoa a lot. Can you do a tutorial of wood for with a 50w fibet laser

[@LaserEverything]

Fiber lasers aren't very good at marking wood. Typically the energy density is too high by the time you're marking the wood which results in a fire and lots of burning. While I don't typically recommend it we may do a video on it in the future to demonstrate why.

[@javieruriel]

Do you know a reliable place to get a raycus fiber laser?

[@sunilsharma-rq3nq]

thankyou and I have one question is that where do we use a current table from sw1 sw2 and sw3?

[@LaserEverything]

The current table should be on the controller next to the pulse rev table. I don't usually recommend adjusting sw1, 2 and 3 unless you suspect you are having some kind of overdrive/underdrive power issue.

[@Piecemakerfirearms]

How on earth do you tell the rotary and laser to mark a simple line around the circumference?

[@LaserEverything]

I'd measure the circumference and then draw a line or very thin box along the right axis that's exactly the length of the circumference. Go into rotarymark like we do in the video, set a split size and then run it. It should go completely around the bottle. If it doesn't make it or over laps either you're circumference is wrong or you're out of focus or the bottle isn't level or it isn't flat against the rotary tool or a combination of all of those things. Everything has to be just right.

[@Piecemakerfirearms]

Thank you very much for the help! I Will try this first thing this morning.

[@LaserEverything]

Happy to help

[@Piecemakerfirearms]

That worked! Thank you so much for your time and help, im still playing around with the split sizes but i think ive about got that down. Your videos are very informative and have been the best in explaining the settings and machine functions. Translating the instruction manual from chinenglish is another skill to master.

[@LaserEverything]

Yeah haha. Glad you're getting value out of the videos. Hope to see you on Discord!

[@ideal_laser]

Thank you for the useful information.

[@LaserEverything]

Glad it was helpful! Thanks for watching!

[@bel31670]

Great video.. I learned a lot… thank you

[@LaserEverything]

So glad it helped you! :D

[@KevinSchloemer]

Great video. Im running into a problem where the box you said to not worry about is on all of my new projects, how do i get rid of it?

[@kapple5290]

I noticed that by the end of the video you had "force all by split" enabled. Could you explain this setting and whether its necessary? Thanks!

[@LaserEverything]

Unnecessary and in this context does nothing. Just ignore it if you're following along with the video. RotaryMark handles split allocation fine on its own. Force all split has implications if you're trying to let ezcad decide where to make splits, which I don't recommended. Static small split sizes is 100% the way to go.

[@GraficaPublicart]

teaches how to mark stanley cups, we are from Brazil

[@LaserEverything]

I'll look into it.

[@fardanoman]

Thanks

[@LaserEverything]

You're welcome!

[@Dumentedesign]

please i need guide to connect my 3w uv laser to lightburn

[@LaserEverything]

Check out the Lightburn for Galvo Crash Course: kzbin.info/aero/PLoBR3k35202Yjc1yMfPZsY8EDh_pmcaa2

[@alvarorecoba135]

Oh My god..You'r Amazing..Share Everything Very Very Detail..Thank You So Much...I Hope You Healthy Always Bro..Oh ya can I Ask Something? What Different Laser Tumbler With Rotary Mark And Split Mart 2 ? Split Mark 2 For What? THANK YOU..

[@LaserEverything]

Thanks, glad you liked it! Split Mark plugins you are telling the laser where to split up the image for rotation based on lines you place on the graphic, Rotary mark you tell the laser where to split up the image based on how many steps the rotary takes between marks. That's the only real difference.

[@martinstehlik9902]

Very helpful for me. Can you please tell me what W machine are you using in this project?

[@LaserEverything]

This was done with our 30w JPT LP Mactron Fiber :)

[@shirazparacha2024]

RotaryMark can be used for both : logos and text files ?

[@LaserEverything]

Yep, works with anything vector based, just no raster images.

[@USFreedom]

I see all types of videos for great content but I don't see a video on how to set up a fiber mopa so that will do colors. Am I missing it or should that be on your list soon?

[@LaserEverything]

Coming soon 👍

[@USFreedom]

@@LaserEverything You're the man!

[@leosanfra]

Amazing content... Thank you for your dedication it helped us a lot. I'm eager for more rotary content in the future 🤩👏👏

[@LaserEverything]

You keep watching and I'll keep making them!

[@mohammadyahsinebhugaloo2725]

hello.. thanks for the video and it was very helpful to me.. but when i try to engrave graphics the rotary does not rotate... i can only engrave text.. can you help me out .please

[@LaserEverything]

You're likely trying to engrave a raster image, which ezcad does not support in rotary mode. It must first be converted into a vector. Check out our episode "Art Prep for Engravers" for instructions on how to do so!

[@Luis-lw1lw]

Excellent video. If I want to engrave for example a fingerprint inside a ring I would have to use rotary Mark? I have engraved text inside and outside rings but vectors so far I don't know how to do it. I hope you can help me.

[@LaserEverything]

Yes rotary mark with the ring at a 15 - 20 degree angle so that the laser can actually hit the inside of the ring. Split size should be some multiple of your line distance. Triple check your focus before you begin since it will be at a slant.

[@Luis-lw1lw]

@@LaserEverything I guide the focus point using the two laser dots next to the lens. Is this OK? Or should I measure the distance from the ring to the lens with a ruler?

[@LaserEverything]

I don't always necessarily trust the dots. The fixtures that hold them in place can loosen over time and who knows if they came from the factory accurate. I recommend going to watch the fiber laser setup video where we go through how to measure your focal distance accurately and create a focal stick. At the end of the day nothing beats a physical stick you can jam in there and be absolutely sure that it's going to work.

[@leappeov168]

Good Video

[@LaserEverything]

Glad you enjoyed! Thanks!

[@ColeBernloehr]

Great video! I followed all steps and got the rotary to work for text but it will not work for any bitmap file or image. Any ideas as to why?

[@sweetmedical7463]

do you parameter manual

[@LaserEverything]

masters.lasereverything.net/

[@AlanTechCell]

É Possível utilizar isso na máquina TBK 958B?

[@LaserEverything]

I'm not familiar with that machine. You could try asking in our free Discord server to see if anyone knows, there's a link in the description.

[@mehmetcelikkaya2632]

What should be the power, speed and frequency settings on the fiber laser marking machine according to the material applied?

[@santiagopandal6033]

Is there anyway to connect a rotary attachment to a 20W fiber laser?

[@A2ZGeek]

Awesome video, thank you!

[@LaserEverything]

Glad it helped!

[@DimensionMachine]

Great vid, I sure would like to find an all enclosed all in one stepper driver like that, very cool. One comment though, the head on my fiber laser is only secured by 4 bolts up where the horizontal arm meets the column. if you loosen those you can move the head forewords and backwards, so that you can get the center line of the laser lined up with the center line of the rotary. Sure seems like an easier way to center things? No more messing about in the software with offset lines and such. Correct me if I am thinking about it incorrectly though!

[@LaserEverything]

Wow I never noticed that, good eye! I will try to implement that soon!

[@GmanInd]

My arm/head came out of the crate centered to fit in the shipping box, so step one was to slide it back otherwise the head was off the table.

[@ElliotHYoung]

Can you change the split size in between passes on the object? Like, if you want it to be faster to reduce the time on the device the second pass?

[@LaserEverything]

I don't believe there's any way to do that currently in LightBurn or Ezcad without saving two project files and running one first, then opening the new project and running the second one after.

[@ozziesoto2955]

What size is recommended to use with the rotary?

[@LaserEverything]

The 80mm and 100mm rotary tools are what I would consider to be "standard" sizes.

[@GmanInd]

Thank you for the video, I just pulled the rotary axis out of the box and did not know anything on how to set it up. My package did not come with a materials library for the speed/power/KHz canned settings , is this a file that can be shared? I would appreciate a head start on speeds and feeds for the Galvo (20w) I have an old beat up tumbler I am using for the test, I finally managed OK looking engraving. After a few botched attempts and a quick shot of matte balck over the tests I was able to run several tests on an otherwise junk piece. Maybe a hint for others, use a junk black tumbler, spray over tests to re use same piece for more testing, I know an erase pass (hatched rectangle fast and hot) would make the final engraving better but this is a test piece for me and mot worth the time and smoke in the shop.

[@LaserEverything]

Hey man, glad the video helped you! You can actually get instant access to my entire fiber laser and co2 laser libraries (updated MONTLY) by supporting the channel/podcast/community on our patreon page. You can check it out at www.patreon.com/lasereverything :)

[@riendhelmendoza1672]

Thank you Godbless

[@dennismegarry6225]

It would be great if you could do a video on wrap around graphics using a rotary.. my workspace is 175mm x 175mm but the graphic I am trying to engrave is 250mm x 60mm.. not having any luck.

[@LaserEverything]

I'll add it to the list Dennis!

[@RetributionXX]

super helpful! cheers bud :)

[@LaserEverything]

So glad it helped you!

[@phantienhung93]

link for the rotory Alex?

[@LaserEverything]

linked in our buying guide: www.lasereverything.net/buyingguide

[@bryanwiley7345]

Will this rotary work with my Genmitsu engraver?

[@LaserEverything]

Haven't heard of it so I'm not sure. If you can, share some info about it and ask in our discord server and we can take a look there.

[@giovanidiaspedroza4237]

Muito obrigado, esse vídeo me ajudou muito 🙏

[@justinmunoz3572]

Is EZCAD a good software to use?

[@LaserEverything]

Not really but you don't have a choice. All somewhat affordable galvo lasers on the market run ezcad. The alternative is some propriety software that only works with proprietary hardware and there's no support anywhere available for it except through the company you bought the thing from - so we deal with ezcad. At least we can help each other and we don't have to go bankrupt while dealing with it. At some point this year Lightburn will be releasing a version of their software that supports galvo lasers with ezcad 2, so we're looking forward to that.

[@yenyen33089]

do you recommend fiber laser thats desktop set up or one thats more portable?

[@LaserEverything]

The style featured in my videos is definitely the kind I recommend. The foldy-uppy ones are cute but usually pretty severely underpowered.

[@glassamerica1]

how do you get the vertical spaces or lines out of the imprint

[@LaserEverything]

You're going to have a hard time not "cross hatching" these tumblers without going VERY VERY slowly (doing an 90* hatch instead of a 0* hatch) and even then, I don't think it would look much different. You can try larger split sizes but then you'll have issues with over lapping split lines and that brings up it's own issues.

[@kabirakbani5437]

how do I go about getting it black is there a setting for that or I need to use a spray ?

[@michael3242]

Hi Alex! Thanks a lot, that was a great help! But I am facing a strange issue: the red-lighting seems to stay active when marking.. is that related to any setting that I have missed?

[@LaserEverything]

Just depends on how your controller is wired up. If it's not hurting anything I'd leave it be.

[@dustinnguyen6173]

I have a 6 switches internal controller... 1-5 off and 6 on I cant find a chart for it. Do you have any reference material on it? Thanks

[@LaserEverything]

I'd need a model number or something.... check out our discord or facebook group for more in depth support and we'll see if we can help. Links in the description.