LaserPecker Laser Compact Mini Engraver Machine review by Benson Chik

[@ZeeChik]

I think the machine looks stylish. Very good video.

[@thanatosor]

😂 Perhaps the rare honest review of a laser engraver which includes even dark side of it like vaporizing fumes

[@BCreviews]

Thanks for watching , since then I had so many laser machine and progressively stronger laser. Fume just get out hand and all needed enclosure and extractor. Using this to engrave PVC is super dangerous as it make acid vapour 😅 . Once again thanks for watching 🎉

[@henrymillar359]

Brilliant video...I'm getting one this Saturday

[@DeathBoy2098]

Good demo, thanks, mate! :)

[@mattsquire2284]

If i want to engrave a house number into a slice of log, should i varnish it before or after engraving? I'm thinking so it can be outside.

[@BCreviews]

I am still learning so don’t know , I always vanish last tho

[@karlclarkeable]

Nice video I’m waiting for mine to arrive can you connect to more than one device to it ie Android phone and I pad

[@horaciocruz1333]

Can you do stainless steel?

[@waleedantar4991]

Thanks for your video, but I want asking is it can make about 2mm deep drawing in rapper ?

[@BCreviews]

Paper ?

[@bill2webie]

i got my laserpecker i love it

[@imprimerieoriginal1104]

good morning! I don't know how you can help me but my laser pecker is blocked and it asks me to recenter the laser. but it doesn't work when I try automatically and manually too. thanks already.

[@BCreviews]

I did not come across that I am sorry, best to ask on Facebook group as a lot of trouble shooting steps available there

[@imprimerieoriginal1104]

@@BCreviews ok thank you very much

[@jdl2180]

Can I use it for tattoos?

[@BCreviews]

Don’t think so 🧐 I think it will burn a scar instead of a picture 🥺

[@jdl2180]

@@BCreviews yeah I was joking haha

[@mixinmagic5995]

Could this cut through a playing card? At the moment I use a Silhouette Cameo but I end up having to pick the small pieces out. Thanks for posting.

[@BCreviews]

I think it can but the card have to have some colour to it. The laser did not cut even thin A4 paper when it is white. Once it start cutting if not strong you can just run the cut again until it cut through I guess.

[@mixinmagic5995]

@@BCreviews Thanks for your response!

[@alanjagroop1282]

Can it engrave pVc cards.

[@BCreviews]

I will melt pvc but generally speaking burning pvc will generate very toxic gas which can be dangerous

[@alanjagroop1282]

@@BCreviews I WILL HAVE TO WEAR A MASK. But wanna start engraving and making water proof cards. Whats a good setting for a playing cards size. To be perfect. How much width/height etc. If u know.

[@BCreviews]

It depends if it is a greyscale photo or just shape. I would say around 5-10 minutes for a playing card size engraving. If you read up on laser vs PVC and get the appropriate mask not just surgical or dust mask.

[@quita-keytah-clapback3093]

Does it only print in black and white?

[@BCreviews]

It is not really ink so not really colour but a different shade of burn 🔥 . It is like toasting white bread and you can get all the different tones in between burn and white

[@kingjmedia9867]

What’s the name of the app……. Can I get it in IOS

[@BCreviews]

I use iPhone and the name of the app is LaserPecker there is another call LP2 but I am not familiar with that

[@abeyush9472]

it is can use on acrylic plate?

[@BCreviews]

If you have a layer of black ink on it yes , laser what you want and then wash off the ink

[@reynabronca3544]

Sirve para madera ??

[@alejandromunoz5992]

Yo estoy estudiando para ser carpintero y quiero diseñar cosas y crear mi logo con este producto

[@suatdonder8597]

Are you sending via bluetooth from your phone?

[@BCreviews]

yes, it connect to the phone app, slow transfer rate but it works

[@suatdonder8597]

Can you help me? Sending a photo, does the sun do the same?

[@BCreviews]

sun?

[@tahdow5226]

after five uses it stopped fully printing once you preview it the box stops fully showing which means your print is bad waste of money

[@BCreviews]

Sounds like a faulty unit

[@jamielong1237]

Does the logo have a raised embossed feel after?

[@BCreviews]

Depends on how much material it burn away. Low power it will change colour of the top material, high power will burn and destroy some material leaving embossed feel

[@jamielong1237]

@@BCreviews Oh ok thanks for that. When you say embossed feel, does it create a cavity sort of rather than actually raise the image?

[@BCreviews]

@@jamielong1237 imagine all the dark part of the image is burn mark. The darkest part have material burn away and light part is intact etc. Light is raised and black is dented

[@suatdonder8597]

ok price

[@suatdonder8597]

If I ask you, if I send you a photo, can you make it from whatsapp on a piece of cardboard and send it on whatsapp

[@BCreviews]

I no longer have this engraver , join the Facebook group where other users may be able to assist you

[@ControlTouchMaster]

It’s one of the worst products I’ve ever purchased. It worked twice and then never worked again. Now it’s just an expensive paperweight. It can only controlled by Bluetooth and it’s internal Bluetooth receiver failed. It’s cheaply made.

[@BCreviews]

Totally understand how you felt if the LP2 only work twice. I bought mine from Amazon and even tho I can source it cheaper by 10-20% I use Amazon because the return process is so good. I didn’t chop it up to see the internals but the design and built material definitely not cheap. Have you join the face book group? LP representative very active there and may be able to help?

[@jdl2180]

Why didn't you return it?

[@DD-lc9jv]

So what you are saying is that its "hundreds of thousands of degrees" and that you cant "illustrate it enough" hmmm? Thats interesting long time.