Last Layer (Part 4/4) Edge Permutation - How to Solve a Rubik's Cube

[@laurenwatson4079]

I Seem to have an unsolvable problem. Can’t seem to find any solutions anyway.I’ve got all layers solved, I’m solving top layer. All corners are correct and in the right spot. Two sides are also correct. Blue and red sides solved, blue and red sides are at right angle to each other with all yellow on top. My green and orange sides are at a right angle from each other and they just need to switch. No idea what to do. Two sides and all corners solves, just two opposite colours need to switch places.

[@PeterHo8888]

Lauren Watson If this is a 3x3 then you're out of luck trying to solve it with any algorithm, unfortunately. A single diagonal swap like this is known as parity and for a 3x3 means that at some point perhaps stickers or individual pieces were swapped, making it impossible to solve. In that case, your best option would be to remove the two center pieces by turning the top layer 45 degrees and sticking your thumb under the pieces to pop them out. Afterwards, pop them back in the correct places with the top face still turned 45 degrees. Once done, you should NEVER have this problem again, unless somebody peels the stickers off or physically swaps the pieces. If this is a 4x4, there are algorithms to swap those two pairs of pieces because parity is allowed to occur in 4x4s. If you need any more assistance, just let me know!

[@laurenwatson4079]

Thank you! I've never removed stickers or removed pieces. This Rubik's cube has been doing this ever since I first discovered the algorithms in the solving guide. Does this mean it was out together wrong? I've since changed the pieces around and have solved the cube many times now thank you.

[@PeterHo8888]

Yea, it seems to indicate that is wasn't correct to start :/. If you have any more questions, feel free to ask! I'm glad you're finding success with your cube :)

[@karmadlaswinmlsk8997]

maybe you have a left cube

[@polly5959]

Lauren Watson you could take out the two pieces and put them in the right spot

[@jasmine5257]

1:40 bar at the back and opposite on the right 2:26 bar at the back opposite on the left 2:58 all sides opposites 3:56 diagonal switches

[@aesthxticxz...15]

Tysm

[@akkamesh2400]

Thank you sooo much

[@preethasunny789]

Thank you!! This helps!!

[@DR3_34D]

Thx

[@himitsu9067]

ily

[@simonsilvio]

1st algorithm: 1:35 2nd algorithm: 2:22 3rd algorithm: 2:55 4th algorithm: 3:52 Edits are me doing it along the way

[@sokongou3223]

thanks btw

[@simonsilvio]

@@sokongou3223 np

[@mythily3451]

Thx btw

[@amreikiling8583]

I was looking for so long for another way of doing the edges and all the other algotithms were so complicated or weird, but those fit perfectly. I´m amazed. Thank you so much!

[@rishavdubey8986]

And that's how I solve my cube FOR THE FIRST TIME, mixing two tutorials and I billion tries. Thank you... 🥳🥳

[@ares3347]

I can't tell you how many times I have run into these problems and I looked up ur vid and it worked! U earned a smashed like bro.

[@autumnleaves8553]

Love this! So helpful and at a pace that allows you to follow realistically. Thank you.

[@Samosa0.0]

I had solved the cube by layer by layer and the last - the third layer was left & by watching this video I solved & it was my first time , my rubix cube was totally solved Thank you very much for sharing this video on KZbin 😄

[@amithsuresh8279]

You are the only person how help properly.Thanks man.

[@merlijnslewe9278]

"If you've made it this far, congratulations, woo hoo" 🤣

[@camilaguevara1615]

Exactly 😂😂😂😂

[@rights731]

I know how to do it but I forgot

[@toxic1242]

I made it

[@merlijnslewe9278]

@@toxic1242 congratulations, woohoo

[@golden_kingz_yt7047]

Its so easy

[@RavinderSingh-ob7gb]

I solved a rubiks cube first time. Not possible without you..

[@lizmortensen9387]

Thank you so much @Peter Ho for making th ese tutorials. Ive always wanted to solve a cube and i have finally done it. Thanks so much!!!

[@EREX5768]

Thank you so much, I was following the guide on my GAN cube instructions, but I got my cube looking like the first example you solved and I kept accidently messing it up. This helped me so much, thank you.

[@iguananaut]

Exactly what I was looking for--I knew there had to be a way, thanks.

[@reecedawson6785]

Sam lol

[@KritiAggarwal1]

Me too

[@GucciLoke]

Same

[@GucciLoke]

@@reecedawson6785 true

[@LORD_CLASHER]

@@reecedawson6785 info 9

[@youareabosssyed254]

YOU THE BEST BRO LIKE I WAS STUCK ON THIS FOR SO LONG!!!THANKS!!!

[@mahmoudwehbe7102]

Thx my g you taught me the numbers which made it 10 times easier.

[@joshuakoroivuki409]

Ain't no g 🤣

[@bmp6633]

I watched this video 2 or 3 years ago..... KZbin decided to recommend this video to me after 2 years....Back then I didn't even know there is something called PLL or oll... I saw on video, where a guy does the M moves.... I noticed that and I put that video in slow motion and found that one alg..... Then I searched up some senseless stuff and somehow saw this video😅..... That's where I started learning pll and oll..... And now I'm sub 20 .... 2 years back.... I was sub 50 and now I'm sub 20.....#roadtosub10..... I really thank u.... Because u Brought me into the cubing world.... Before I was just solving the cube for fun and aimless.... Now I have an aim.... Be sub10..... Thnk u ❤

[@Rheiahrvraixge]

omg it worked all the other tutorials ive found havent worked but yours helped me to solve my first cube thx soo much

[@sophalchan2381]

finally did it! thanks, solved my last step. I had to pause the video at each step since you moved too fast for my beginner's eyes. My top layer had all opposites so i used 3:20 to complete it. thanks

[@ismailaffan5118]

Thank goodness this was on KZbin thanks

[@dominator_296]

thank you so much dude, you helped alot , i took so much time finding a video for this one

[@Demonboy45681]

I know that I may be late to comment this but thank you so much that I learn new tricks in third layer " I feel so proud of my self"

[@77trick]

Thank you kindly! I needed the third algorithm, I was getting that scenario a lot and it was hurting my time having to do one algorithm 2 times instead of just doing one algorithm. Thanks!

[@super_youtube681]

Thanks I was not able to solve by other vid but u r vid was the one which helped me in headlight

[@P4-Swift-Watch]

Your #2 fix worked for Opposite on left. Thank you!

[@ashmansingh1502]

Thank You So Much!! I was very panicked that what to do at this moment but because of this video, I learned how to solve this problem!! Thank You Very Much!!

[@sebru]

OWEMGI tahnks ma men finally i can solv my cube after 4 years of having it lol jk actually thank you for real becasue you helped me, and other people for solving the cube quicker, and not doing much more moves than ever thanks dud i appreciate it

[@dkentbans4055]

this is exactly what i looking for ....thanks men

[@KingOfMice633]

i learnd a differant way but i could not remmember the moves so i started to look and found this one and it helped me A LOT

[@sienna6375]

Thank you so much with the opposite pieces in the wrong side helped me solve my Rubin cube that I have been trying to solve for days and this video was really under standble

[@sou_desu8587]

my gosh good thing i found this . the way i solve keeps leading me to this situation

[@shabanasaleem2222]

now i have two methods thanks 🙏🏻 man

[@kts41]

Just what I needed 🙏🏻🙏🏻🙏🏻🙏🏻

[@kyrios7737]

Thank you so much I love people like u

[@Buffseal]

This guy is a life saver !

[@Bobrod_0]

Thank you this helps soooo much I was stuck on this for days

[@hamish4092]

I got a little stuck because I was reading off the description and you put M instead of M' for some algorithms, but thanks anyway better than my other algorithms

[@PeterHo8888]

Hey, I'm glad I could help! Btw, M-slice moves are done as if facing it from the left side. So M means you push the back of the M slice up, and M' pulls the bottom of the M slice towards you! I'll put a note in the description.

[@hamish4092]

@@PeterHo8888 ooh I thought it was the opposite thanks for your help

[@adamtherobloxian9974]

My case is that 2 opposites are solved but the other 2 opposites arent

[@tanyalovescats2012]

In my book the formula was so tough but when I saw your vedio, it was so easy.. Thank you so much

[@noelarbfors8531]

Thank you so much!!!! I have tried to solve for 13 hours

[@balint-27]

Thanks for helping me solve my first cube 🙏🙏

[@CFHmetalorama]

Saved me, only my second time solving and I encountered the opposite left scenario with no idea what to do. Thanks.

[@akandagency145]

Thank you so much i solved my rubiks cube for the first time.🎉🎉😊

[@autumnleaves8553]

Bar, 3 Edges opposite on right 1:35 Bar, 3 edges opposite on left 2:26 All bottom edges opposites 2:55 Bottom edges 2 diag switches 3:52

[@Saymon9788]

Thanks

[@Saymon9788]

😊

[@iamawesome495]

Thank you so much.... I was searching for this only, I am here after 5 years though 😅😁😆

[@dilansandhu3170]

Exactly what I was looking for

[@paillo999]

Awesome video. Finally someone who dose it nice and slow keep up the good work!

[@trishwaaah]

ive been looking for this patter my whole life 😭

[@Inbounded]

i have been in Case 2 many times, I tried to redo again and still Case 2 but I managed to do by your help. Thanks

[@turnup4dpturnup4dp16]

Thanks for showing that because I could not figure out how to do it

[@SamMon-gb6ej]

Thanks for this! I can now sleep well. 😴

[@ImaOtamatone]

Ty I finnaly learned the all opposite case it was a nightmare for me

[@Xaol]

FINALLY A CUBETUBER WHO HAS ACTUAL WORKING ALGORITHMS TYSM

[@WaringaKahui]

Thank you so much.... Just what i needed

[@jobroski7902]

For some reason whatever I do it doesn’t go back my case is 2 edge pieces are swapped but the left and right are solved and whatever I do if doesn’t solve any help

[@srl390]

Same nobody can explain it

[@riditsrivastava497]

Read the pinned comment Replies

[@riditsrivastava497]

You cube has 2 edge pieces swapped this isn't a solvable case ... Take the 2 edge pieces out and put them In the right place

[@srl390]

@@riditsrivastava497 yeah I solved it back a couple months ago because I took out the centre pieces and solved it! I was so dumb, I had no idea why I took them out in the first place, but it’s fixed.

[@rashmilalchandani1478]

Thank you. I needed help and you helped me. Thank you once again

[@PhantomGamingX1]

Great man very helpful

[@sofiadomingo5793]

Thankyou so much! Love this vedio! Very helpful ❤🎉

[@lordgrim5599]

Just what I needed for everything. Thank you for this

[@Ck_dEviL]

OMG, THANKS A LOT FRIEND ... IVE BEEN SEARCHING FOR THIS ALL THE DAY.... EVERY OTHER PERSON SAYS TO START WITH SOMETHING LIKE "RURUFUR" SOME SHIT!

[@ashpo1707]

You are honestly amazing thank you so much

[@HexaSheep]

Thank you so much. Nice with a turtorial that actually works😂

[@lazarsimonov1166]

Thank you so much, i have been trying for 2 days and i have been raging when people go too fast and i mess up, this was my first real solve

[@ant88z]

exactly what i was looking for i can knock 10 seconds of my time now

[@miramah03]

Thanx man..just solve my first one..Learn my basic grom the other youtuber but did not work at the last stage for some reason. You saved my life..cheers keep it up

[@floppyboi01]

You saved my first ever cube solve tysm

[@jayjayDrm]

i solved the rubik's cube the first time with the algorithm presented by the "wired"-video, so far so good, but i was looking for a faster solution for the last step. this is exactly what i was hoping for. great. how do you come to these algorithms?

[@thedivinevibration108]

DUDE we on the same world now Sameer weird video was the first time solving the cuberee

[@SuperBartles]

I'm sure I remember a different algorithm for the last case at around 6:30. If I ever get that memory back I'll post it

[@xyromastr]

It's been a year dude

[@rm37404]

It's been two years

[@SuperBartles]

@@rm37404lol, so I've got this thing called the rest of my life, which sort of takes over every now and then, and I lose interest in short term hobbies. However I'll have a look now you've reminded me - EDIT: I doubt I'll remember this one any time soon. A lot of it came back to me but not this sequence :(

[@gliterhussainsgameplay6379]

thanks a lot i am looking for clockise and anticlockwise edges In M moves its very easy to perform M move love your video🤗🤗🤗

[@yusufbadereldin5074]

Thank you bro! I finally solved my first one!!!

[@lagzalot3718]

Thank you so much i had the first problem where the opposite was on the right side, Thank you for helping me.

[@xscorpion2733]

Bro U R AMAZING!! THANK U SOOOOOO MUCH!!! I was stuck on the first case but u, u buddy! showed me how to solve it!! thx bro i subbed too!!

[@virendrajain2104]

Wonderful way to explain.👍👍👍

[@codeprime81fan6]

thanks so much, liked subbed and notifications :)

[@blu.draigon]

Any idea what to do if the other two are correct middles but one isn't I am currently struggling with that

[@catherinemercado4496]

Those dislikes are the one who cant follow the move of the cube

[@gaming4u262]

I had the same scenario just different colors. Btw, thx this helped me a lot

[@marudharranawat7267]

I solved my first cube because of you thanks a lot

[@findnixx]

Thanks i solved my cube 1st time Thanks man!!!!!

[@cxnqst]

mustve felt good huh? u speed cuber now?

[@dand4549]

Awesome and clear instructions

[@rajkiransangvekar]

Thanks for your solution!!

[@jking_ooop]

*In my case there are two bars in last layer and two in the bottom as I did it with roux so can you help me with that ? In top layer bars are next to each other and in bottom bars are opp. Of each other , how can I switch these edges ?*

[@PeterHo8888]

If you're using Roux, then this tutorial is probably not the best to follow. This specific video follows a 2-look PLL method for CFOP. For your case, you still need to solve the LR edges on top (step 4b of LSE), and then you can solve the remaining four edges with step 4c of LSE. There are a lot of tutorials out there. Here's one from Kian, who's very well respected in the Roux community (although hasn't been active recently): kzbin.info/www/bejne/j32YZpVue9GdpKc You can also find Waffle's tutorial here: www.speedsolving.com/threads/waffles-roux-tutorial.11506/. There are KZbin videos linked here for each of the steps. If you have any more questions, just let me know!

[@jking_ooop]

@@PeterHo8888 thank you soo much sir , didn't expect this much detailed answers , thanks a lot 🙏🙏🙏

[@kishaalles6088]

Clockwise edges - (R2 U R U R' U' R' U' R' U R') Anti clockwise - (R U' R U R U R U' R' U' R2) Opposite Edges - (M2 U M2 U2 M2 U M2) F edge and R edge switch - (M2 U M2 U M' U2 M2 U2 M' U2) M means the middle in between L and R. Is goes in the same direction that L would

[@pxtrx1380]

This was the first one I learned then I forgot and then I could never find the vid that thought me it but then I saw this comment and thank youuuu 🙏🙏🙏

[@cbnewham5633]

This is the explanation that should have been given in the video.

[@islamiccorner2000]

My cube has blue and green side completed and two other sides have missing edge pieces . Kindly tell about that.

[@alanahuggins2348]

Thanks this really helped solved my rubics cube!

[@ares3347]

Rubiks or Rubix

[@youtuberbayleexiong908]

This exactly what I was look for how to use these m moves to complete the last edges

[@jeanfe268]

Thx soook much this helped me sooooio much thank you !

[@flighttoggled1714]

WHAT DO YOU MEANNN all opposites doesn't work for me i do it everytime and it always screws the cube up

[@janmichaeldavid7284]

Thx dude i forgot this alg because of quarantine but thx so much

[@wethr]

thx dude I went from 60 sec avrg to 35 sec avrg thx

[@_e.nev_8560]

ItzWeatherMan 😂😂😂😂 it took me a year and a half and I still haven't solved it!!! 🤣🤣🤣🤣🤣

[@higuys7981]

@@_e.nev_8560 nibba u dumb lmaooo lol

[@william737w]

@cookieswithtae don’t be rude some people aren’t as good

[@iplaygames6691]

@@william737w ikr

[@36kirby94]

Shame of BTS

[@paywithbrizz]

What if I need to move all the yellow cross to the left but all sides are already ok?

[@rajnisharma271]

This was really helpful

[@anniesalvanera3791]

yo brother thank you man this helped me bruver

[@CherryShortcakeYT]

Thanks.....I easily learnt how to solve the cube ☺️

[@homiedark9798]

Thanks bro u the best

[@shivbhattentertainsyou2985]

you are a godddddddddddd, it helped me sooooo mucccchhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh. thank youuuuuuuuuuuu 😊😁😁😁😀😀

[@levelsop6772]

That helps me a lot thanks:D

[@endyvfx]

i have a problem, i did it a different way as you, so i hope u can answer what do i do when my cube's yellow face(corner) is top but others aren't in the right place, like they're switched

[@PeterHo8888]

Sorry I'm a little late, but perhaps this will be of some help? kzbin.info/www/bejne/b5nMiGOqa5xobZY It sounds like you still need to do corner permutation

[@endyvfx]

@@PeterHo8888 it's fine

[@ArnoldMaheshwar-q4w]

Finely....😮 Thank you! Bro Your my god...😂

[@brokensmiilez8366]

Just needed a refresher. Haven’t solved one in months