How to Make the Ultimate Survival Pull Pin Firestarter - 15 Min Burn!

[@LastBushSurvival]

Materials & Tools Used: ✅ Security Matches: amzn.to/4fzNkL0 ✅ Waxed Thread: amzn.to/3UXOYxE ✅ Mini Balloons: amzn.to/3CJ3jrh ✅ Cotton Pads: amzn.to/3Zb1k7Z ✅ Vaseline: amzn.to/48WcdOn ✅ Torch Lighter: amzn.to/4eyVDFy
 ✅ Mini Folding Stove: amzn.to/4hPPA27
 ✅ Smartwatch: amzn.to/40Rr36T
 ✅ Steel Mug: amzn.to/4fPaUTA

[@ethirtydavid]

dope dude

[@godividarr]

People have been rigging up pull strike matches for years, but this is the first design I've that might serve a useful purpose in the woods.

[@LastBushSurvival]

I appreciate the feedback! There are definitely many creative ways to approach fire-starting, and I'm glad you find this design practical for the woods. Always looking to improve and make things more useful out there!

[@ApocGuy]

we used to make DIY smoke grenades for AIrsoft this way (at least for "trigger" part). it was far cheaper than cheapest available on the market ;)

[@MrQuick999]

His design a billion times better than matches. If a man can't light a fire with what he shows then man need to find a really smart woman to take care of him.

[@tannerwelch3650]

​@@MrQuick999now compare it to a lighter. I can start hundreds of fires with a single lighter and it takes up the same amount of space

[@samuraichicken9248]

​@@tannerwelch3650the point is that it is its own kindling as well, you use it to start a larger fire. It is also waterproof, which most common lighters are not.

[@dsveo]

This is a great idea! When you are cold and wet with freezing hands, trying to use a lighter and even a ferro rod can be impossible. This is a great solution. Bravo!

[@LastBushSurvival]

Glad you found it helpful, I appreciate the support!

[@ebikeoutdoors]

I totally agree stuff like this really can save your life and let's face it there look very cool 👊✌️

[@tearstoneactual9773]

And you can operate it one-handed. Just put the loop in your teeth and pull. Voila!

[@splatmarina]

pyromaniacs use these to start wildfires

[@tclanjtopsom4846]

😂😂😂😂

[@denikoboroda]

Great idea, man! I tried making my own and slightly changed the setup - instead of electrical tape I used masking tape, it's based on paper and burns good too. Also, I used one stormproof match together with 5 regular matches - the ignition phase became more intensive. Thanks for the idea!

[@Scleavers]

My fear is the contact with the match head with the strip. We'll have to make sure they are separated, don't want it to go off inside the packs

[@LastBushSurvival]

Hey, awesome that you gave it a shot! Masking tape and the match combo, love it man! Bet that ignition kicks in like crazy. Thanks for sharing your tweaks; gotta try that out myself!

[@LastBushSurvival]

Good point Scleavers. You can actually add another balloon over the top part to hold the strip in place, so there’s no way it can slip out on its own. Plus, you really have to give the string a good pull to get it going, it’s not gonna come out that easily. Thanks for looking out!

[@Lunas2525]

Humm i was thinking what if instead of balloons wax was used. Humm same match setup minus the plastic instead masking tape then wrap the whole thing in natural twine then dip in bees wax.

[@matikaevur6299]

@@LastBushSurvival Maybe even change one match with piece of sparkler .. or sprinkle in sparkler coating. Those things burn even when torrential rain is horizontal ;)

[@kmorris180]

Your video is without useless filler. Thanks for making it. It earned my subscription.

[@LastBushSurvival]

Thanks so much! I'm glad you enjoyed the video. I try to keep it straight to the point and useful. Appreciate the sub!

[@PNWHerb]

comes with free labored breathing

[@DiabloOutdoors]

Same here

[@birdbrainsolutions6112]

Your comment is without useless filler as well. Thanks for making it. It earned my subscription of this channel thanks to you.

[@TonyRueb]

That's because the whole video is useless.

[@chrisb8046]

14 to 15 minute burn time is enough to get pretty much anything started. Good work.

[@GenderFluantSoy]

..... not what your wife says chris-o

[@mikebrown9718]

What a smart way to make a fire starter! I’m going to use your idea and make at least two hundred of them (for starters) and give out to some homeless camps that we serve food to on Thursday evenings (Urban Bicycle Food Ministry: UBFM, Des Moines). We serve over 650 homeless people every week, a lot of them live in tents out in the woods. Like someone mentioned in the comments, when your hands are cold, it’s hard to even to operate a lighter. Thank you for sharing skills with all of us!

[@birdbrainsolutions6112]

Thank YOU for being a good person

[@curiouslittlemeowmeow]

Your video randomly passing through my algorithm and this is super useful. Thanks!

[@johnwhiten5124]

This video came up in my feed and I subscribed immediately after watching. I love the videos. Straight to the how-to! No BS. No history lessons. No babbling for 5 minutes before getting to the point. Easy to follow. Keep them coming!

[@buckvirga-hyatt4715]

We use the paper egg cartons. Fill them with dryer lint and pour wax on top. Then cut or tear them apart. They light up fast and burn for 10 to 15 minutes each.

[@LastBushSurvival]

That’s a great method! Thanks for sharing!

[@jewelhome1]

@@LastBushSurvival. Most drier lint these days is synthetic plastics, nylon, polyester, etc. A lot of those give off nasty fumes when burnt. Cotton lint would be OK.

[@jhend91]

@@jewelhome1 I tried it. My dryer lint is full of my wife's and daughter's hair. Not to mention the hair from the cat. Smells awful when burning.

[@ClaytonwFirth]

I use egg cartons too, just use saw dust instead of dryer lint…. Fantastic for starting fires.

[@brianshepard2237]

@@ClaytonwFirth Yes! Cedar sawdust for the win.

[@Drrayoldman]

As a former big game hunting and wilderness guide, I have finally found a video that I can actually use. I have spent many days in the western mountains of Montana under all kinds of weather conditions. For the first time I can say this person‘s idea is just short of genius. some weekend afternoon in the near future when I’m in my basement was very little to do. I will make up a whole bunch of these things. I’m taking a guest is saying they will last a very long time and dry storage.

[@birdbrainsolutions6112]

"Dammit Ray, are you in the basement playing with balloons again for your little picnics?!" lol hahaha

[@interexp]

can you please make something double the size so the torch can last like 30 min please

[@PockyBum522]

This is the first firestarter video I've seen where I thought, "Wow, that's actually useful and builds on existing ideas" I can't wait to see improvements to this. I have some ideas for a version for myself. These would be nice even just camping in a normal campsite with full supplies. Or heck, also lighting the fireplace in your house.

[@LastBushSurvival]

Glad you’re into it! I’m always working on new ways to make these even more effective, so definitely stay tuned for updates. And you’re spot on, they’re great for the campsite. Looking forward to hearing about your version!

[@QdMaster]

Yuppers, sitting here thinking of tweaks and definitely gonna make a few for quick fire starting, especially good for when your just getting set up or want a quick morning warm up/coffee fire!

[@birdbrainsolutions6112]

@@LastBushSurvival You should make a larger version like a flaming torch (fire only on one side of the stick) that lights up when you pull a cord, it would be awesome. Thanks for creating this video, so creative!

[@carlosspeicywiener7018]

Reminds me of something we made in scouts using paraffin, gause and storm matches. The notion was that if the components are each waterproof, there's no need for waterproofing the end product. Of course we learned all the primitive fire building techniques and all that, but innovation and ease of use was also a good focus.

[@boonehelm7271]

Ahh yes, I remember scouts. Back when it was wholesome and rugged. Good times

[@TheBrothergreen]

Lol "rugged." I know this is just thinly veiled homophobia, but your overcompensation is telling.

[@Oscar-ds2vb]

@@TheBrothergreen hahahahahahahaahah you are mentally ill

[@gumbyElvis]

​@@TheBrothergreenI think that homodiscrepare might better capture his meaning. I see disagreement in his comment, not irrational fear.

[@TheBrothergreen]

@@gumbyElvis That's because you lack the context of knowing what he's talking about. Shrug. Or maybe you don't lack that context and are simply gaslighting. It's hard to tell these days.

[@stuartbailey6201]

Looks like something that would get smuggled into prison.

[@mixxslave-eo7hs]

Too bad if you grabbed the string to pull it out...

[@stuartbailey6201]

@ I

[@masterjair8069]

​@@mixxslave-eo7hs😂😂😂

[@masterjair8069]

😂😂😂😂

[@LastBushSurvival]

Just wanted to take a moment to appreciate all the amazing support, comments, and ideas! You guys are awesome! I’ve seen the concerns about latex degrading with petroleum-based products over the months, and I totally get it. I’ve been working on a pretty neat solution to make these last for years, and I’ll be sharing that soon. Stay tuned!

[@PlommeViking]

Just use nitrile glove fingers!

[@LastBushSurvival]

@PlumViking that’s the idea 😜👻

[@cindykling7123]

Could you provide a list of the materials? •What are you wrapping the outside with; is it string or wire? •Is that a cotton pad you're using? •Is that water your soaking it in at the end of the video? Thanks!

[@jkg6211]

​@@cindykling7123 To answer your 3 questions; 1. String. I think it's Bankline, but any cotton based string should work. 2. Yes, cotton pad. Poly won't work as well, because it's not as absorbent or flammable as cotton when soaked with melted Vaseline. (Very flammable) 3. To prove that it's waterproof. These are all MHO, of course... YMMV.

[@jkg6211]

@LastBushSurvival - Pine pitch?

[@ClearWaterFarms]

This is one of the best ideas I have seen! Thank you for sharing this with us all. It's simple, waterproof, and relatively compact! Make sure you all use good quality string if you plan to make and store a bunch of these. I wound up making some wax thread to prevent decomposition of the string as time goes by. Thanks again for this wonderful and simple to make idea!

[@LastBushSurvival]

Really appreciate the feedback! Keeping it simple, waterproof, and compact was the goal. Yep, that’s indeed waxed thread! It’s perfect for durability, especially when making something that needs to last in tough conditions.

[@ZapperguyLOL]

@@LastBushSurvival For that matter you could use waxed dental floss. It's strong enough for the ignition pull, waterproof, and flammable. Very cool concept. Thanks for sharing. ☮

[@glennbrymer4065]

Now this is a super idea. Hats off to you for this one sir! The 1st thing I thought after see this, was to wish I'd had this idea 50 years ago when I was back packing.

[@LastBushSurvival]

Glad I could help!

[@Richard-f4b4r]

Sincerely appreciate the video! Decades ago when I would camp, I would always carry road flares with me especially with wet wood. I'm going to make a bunch of these for space saving!

[@LastBushSurvival]

Glad you found the video helpful! Just a heads-up: Vaseline can degrade latex over time, so if you're worried about that, using nitrile glove fingers could be a solid alternative. They hold up better against oils and won't break down like latex. Have fun making them, and let me know how they work out for you!

[@Richard-f4b4r]

@ Nitrile gloves are a good tip! Thank you

[@bobmahnamahknob]

That's funny, I just made both of those suggestions before I happened to read this comment.

[@dirtsmiles8098]

Nice idea. I’ve been using a mix of paraffin wax and lighter fluid. Dip those disks and let cool. Burns easy and a long time. It also doesn’t make a mess.

[@jessezass]

This is the first useful "Build your own" type video I've seen pop up in years. Thank you for helping people instead of just wasting our time.

[@LastBushSurvival]

I really appreciate that! It means a lot to know it's actually helping. I always try to keep it practical and useful. Thanks for watching and for the kind words!

[@78KeishaW]

I just know you're parents had it all when you were a kid you prolly invented so much. I just love ingenuity that works❤❤

[@greywolfoutdoorshomestead9962]

Welp. Looks like me and my 16 year old son have a neat project to try. Thanks. My son is high on the spectrum and doing projects like this is an amazing bonding time for us.

[@LastBushSurvival]

That's awesome! Working on projects together is such a great way to bond. If you ever need any tips or help along the way, feel free to reach out!

[@greywolfoutdoorshomestead9962]

@@LastBushSurvival I most definitely will. Thank uou

[@MatzH300]

This is one of the practical tips in a youtube video i have ever seen

[@sajeucettefoistunevaspasme]

It is definitely one of the videos of all time

[@Badger77722]

Great idea and video on how to make these firestarters! I'm putting this video in my "how to" section so I don't lose it! I do have two very small suggestions: a parts list for the video would be nice - I wasn't sure if those were some kind of mini balloons, or maybe condoms for hamsters! I read some comments and found out, but a parts list would be nice to know about the string (bankline?) you used, etc. Also, a suggestion for the firestarter: I would make sure the pull loop is big enough so a gloved finger could be used to pull it - just gripping it if things are wet with a glove on might be difficult, but being able to hook a finger (even with a glove on) through it to pull it would make it even easier to use, IMO.

[@YouTuber-mc2el]

I have been experimenting with all sorts of firestarters and I gotta hand to ya. This one is awesome. Thanks for sharing.

[@LastBushSurvival]

Glad you think so, thank you!

[@jdtheone]

And this is why I am paying attention to different channels so many great and different ideas and techniques that you can use to make your life easier and effective thank you for your work and content 👍

[@dirtyscoundrel2013]

This is awesome. Im going to make some of these but using a different technique. I made some fire starters that are much smaller and burn on average for 17 minutes but arent self igniting. Well done, sir.

[@LastBushSurvival]

Thanks for the kind words! That sounds awesome! I’m curious, could you share a bit about how you made your smaller fire starters? I’d love to hear more about your technique!

[@dirtyscoundrel2013]

@LastBushSurvival wish I could. I'm applying for a patent. I will say they are waterproof, cubed shaped and about half the size of a dice. I've set up camp in the light from two burning, tested them under the most extreme conditions I could and some military guys have tested them for me while deployed. I'm curious why you have string wrapped outside your balloons? Oh here's a cheap way to make poor man's survival matches. Unravel a cotton ball into a long thin cord wrap it around the shaft of a strike anywhere match about 3/4 down then dip in hot wax. I've been teaching my students that technique for almost two decades. I'll be checking out your other videos. Thanks for replying.

[@jordansenna752]

@@dirtyscoundrel2013 Jeez dude... condescending much? Not everyone has to be a pyromaniac fire master to try something and post it on KZbin. Calm down bro, your amazing firestarter will rock the world and you'll be a millionaire ok?

[@badeugenecops4741]

​@@jordansenna752 I doubt it.

[@dirtyscoundrel2013]

@jordansenna752 lol none of my parents have rocked the world. Not condescending at all. Maybe you should look that word up. It's called work product security. It's just a little product that can help save lives. Now tighten the strap on your helmet and go ask your mom for a cookie. Now THAT was condescending.

[@kolt-ki6up]

Definitely going to make a few of these to have in my woods bag to test out i love the creativity and usefulness of what you have made

[@vortega472]

Probably something you don't want to keep in your pocket, this is briliant.

[@beakingsman777]

@vortega472 put them in an old altoud mint tin

[@traviscecil3903]

Or make the pull string long enough to loop back over the other end and use a stick, rod, or other very small block as you would find a pin on a grenade. Pull the block out, slip the string off the non fire end, then pull to ignite.

[@paulus.tarsensus]

This is actually one of the best hacks I've seen. Thank you. Think we'll be making some for stocking stuffers this year.

[@LastBushSurvival]

Glad you liked it, thank you! If you have any questions or need help with the build I’m glad to help, just leave a comment 👍

[@birdbrainsolutions6112]

And the stocking? Also another firestarter lol

[@FullCircleTravis]

Pro tip. Keep one in your prison wallet.

[@bravo1554]

what's prison wallet ? anus?

[@We_Dont_Miss]

😂😂😂

[@mv6113]

Pull the string for extra Speed

[@scottl4763]

You haven’t been already?!

[@michaelsterling8065]

Like I’m Wile E. Coyote?

[@makcatchem9614]

Okay that's probably one of the most badass survival diy things that I've seen

[@michaelnasser8697]

That sir, is brilliant! Well done and probably the best fire starter I’ve ever seen

[@Curioushiker]

Thats a great idea. I made fire starters with those pads using melted Vasoline and soaking the pad. Then just drop a spark on the pad to light it. But adding the vasoline coated pad is an idea i might try. Thank you for the vid.

[@Greywyrm]

The best survival item I've ever seen! Simple Genius.

[@LastBushSurvival]

Thank you so much! Really glad to hear that❤️

[@sskyle227]

One small adjustment that I'd do is to put a waxed wick between the matches, although that's only nit-picking. Great video, and I can't wait to try!

[@ThreenaddiesRexMegistus]

These are great, multiple matches ensures reliable ignition and the burn time should get a fire going even with damp kindling. 👍🏻

[@LastBushSurvival]

Thanks! Glad you think so!

[@jessanddavidboham8014]

That is really amazing and very unique. I wouldn't mind traveling with that because it's lightweight, and it may be a little difficult to do but it's lightweight and easy to carry and to pack with you that is a great survival tool.

[@paulworgan6599]

Brilliant I will definitely make some of these for emergencies

[@LastBushSurvival]

Thank you! Have fun and good luck with the project! If you need any help or advice, I'm here to lend a hand.

[@gerhardlesch3615]

Excellent video! No yapping; just showing the facts.

[@nolongeramused8135]

Boy Scouts had instructions in the handbook for something similar made by putting a coil of cardboard inside a tuna can and pouring paraffin into it. I got my hands on some magnesium ribbon and added that to the mix. Worked great for winter camp when all the wood was slightly damp.

[@xSn1per97x]

If you dont have the time to do this, a simplified approach is to soak cotton balls in vaseline and store in a ziploc bag. They will take a single spark from a ferro rod and last for years. Learned in survival school and has saved my life more than once.

[@johnniejones30]

Your idea is better given the fact that there aren't any hard plastics present.

[@birdbrainsolutions6112]

>>Learned in survival school and has saved my life more than once. Care to share any stories? Genuinely interested

[@wanderingcalamity360]

That's a nice idea and cleanly executed. Great job with this.

[@LastBushSurvival]

Thanks a lot! I appreciate the kind words man. Glad you liked the video!

[@madwolf7033]

I would use a jute wick instead of the first cotton disc and i would atcually dab it in wax for slower and longer burn, then wrap it in the cotton disc and dab in vaseline. Great video.

[@mitchmitchell7470]

Your idea, is absolutely brilliant, and it will save lives. Well done

[@LastBushSurvival]

Thank you very much!

[@victoriabrown4852]

I like these. I would like to make a couple of suggestions. If you can find and use "strike anywhere" matches, you can use strips of sandpaper. Instead of cotton pads, use dryer lint. Be careful when melting wax, the safest way is with a double boiler, so the fumes don't ignite. I would like to know about what the tube used is to pour the wax in to coat the firestarter.

[@victoriabrown4852]

Sorry, reviewed and realized you used petroleum jelly instead of wax. I stand by the rest of my comments.

[@alexbuilds706]

This is slick… Bit of prep but honestly I can use these. Will be trying to make them soon!

[@LastBushSurvival]

Glad you like it! Feel free to reach out if you run into any questions while making them, I’m happy to help!

[@sodman4874]

Has to be number one out of all the ideas I have ever seen. Nice outside the box thinking.

[@Uhnonuhmous]

Dang!!! That is super creative, easy too. Never seen this. You go son! You could sell these things for quick cash👍

[@LastBushSurvival]

Thanks! I appreciate it! Glad you think it’s creative and easy. Who knows, maybe I’ll start a side hustle with these firestarters!

[@LastBushSurvival]

Oh, hey! Thanks a ton for being a long-time subscriber and for all your support! You're the one who comments the most on my videos, and I really appreciate it. Love you for that! Keep it up!

[@RedRingOfDead]

I should be sleeping. But this is far more interesting. Great vid man. A blessing from the algorithm gods. Thanks for this idea

[@Barrythebarnabas]

2:25 I just realized I’ve NEVER seen someone scoop Vaseline with a spoon 😂 it felt so weird seeing that

[@dahlia5140]

I envy the brains that can come up with these ideas.

[@Opt1mistyc]

Awesome. A survival tactic that's elderly friendly.

[@ethan073]

I’m making some of these for my dad for Christmas he’s going to love it 😎 thanks!

[@vadimc2144]

Simple and efficient. I like it

[@LastBushSurvival]

Glad you like it! Thank you! And welcome to channel ❤️

[@leoleo1035]

1:16 bless you

[@QdMaster]

Interesting idea, you could use wax paper and tape instead of the latex balloons and just wax dip the whole thing to water proof it. Wouldn't be as water tight and would be more heat sensitive but you wouldn't have latex fumes if that was a concern. Love this idea! Good job and great video!

[@LastBushSurvival]

Thanks for the suggestion! Wax paper and tape could definitely be an interesting alternative. It might not be as airtight, but the idea of avoiding latex fumes is a good point. I’ll keep that in mind for future experiments! Appreciate the kind words!

[@grigorione7824]

awesome! what if you mix tiny bits of charcoal into the vaseline mixture ? or maybe roll it in charcoal powder after the wax ? you reckon that might make it burn longer ? what if you wrapped the matches with the tape but also with zippo lighter wicks ?

[@LastBushSurvival]

You've got some great ideas here, definitely worth a shot. Thank you for sharing your thoughts!

[@BamaShockz]

This is actually an amazing idea. i agree with everyone else that if we can find a way around the balloon, this would be a foolproof solution. Great video!!

[@WilliamBrooks-ig7mi]

I think you could save some effort and steps with a couple of small zip ties and some heat shrink tubing.

[@paulwhitaker2816]

Great idea , well done ...

[@LastBushSurvival]

Glad you like it!

[@paulwhitaker2816]

@@LastBushSurvival I enjoy all your vids and also thank you for the extremely fast reply

[@LastBushSurvival]

Thanks so much for the support! I’m really glad you enjoy the videos, and I appreciate your kind words. I always try to respond quickly when I can, thanks for being a part of the community!

[@donttuga9310]

Great idea! Maybe dipping the wood end of the matches in a mixture of pine tar and shredded cotton balls(or other fluffy material you can scavenge from the wild) before you tape it will extent the fire for better lighting. Just a thought I had, not trying to criticize you, this is an amazing rig I will be adding to my bug out and camping kits.

[@normmcleanmclean5632]

Not just a fire starter could have lots of use’s. Thank you

[@LastBushSurvival]

Absolutely! They’re super versatile and can come in handy for many sorts of projects. Thanks for watching!

[@NtvMutt74-y4c]

Place it in a small tinfoil base to capture the wax and extend burn time. Works great for cotton balls and Vaseline. Awesome idea my friend

[@jamesa7506]

Very clever build, thanks for sharing. 👍

[@LastBushSurvival]

My pleasure!

[@wolffang489]

This concept is the reason I prefer match books over boxes. Clamping the halves of the book around the match and pulling it through has so much more friction and is so much more relibal than striking normally on the strip.

[@lukaszz.711]

Nice, thanks for great ideas, I gonna try it with coconut oil instead Vaseline.

[@joaoatn8591]

Share your results with coconut oil... Good luck

[@Scleavers]

I don't think the coconut oil alone will work unless enough heat is generated from the first flame. And if it does, how much wind resistance will it have? I would try a mixture of 20% Vaseline and 80% coconut oil or any oil. Another thing is that the oil will be in liquid form, any tear inside a backpack will be devastating 😂

[@redeemedvintageseamstress4728]

I saw another person use wax to dip them in - instead of Vaseline. That could be an option too.

[@lukaszz.711]

I did a quick test, 3 matches cotton and dipped in coconut oil left it for dry and is burning well but I gonna test other materials like lard, paraffin, goose fat + cotton string. I want to see which one is the best wind proof and long burning.

[@joaoatn8591]

@@lukaszz.711 Got it, thk

[@MAWA2024]

Finally an actually innovative and useful survival trick. Clever and much appreciated!

[@LastBushSurvival]

Thanks a lot! I’m glad you found it useful. Appreciate the support!

[@smarttraveler8232]

Thanks, this is awesome.

[@LastBushSurvival]

Glad you like it! Thank you!

[@lairdcummings9092]

This will work. I can think of several easy modifications to improve it, but this basic design does exactly what it says on the tin.

[@justinkeef3692]

Greatest vid I've ever seen ty

[@LastBushSurvival]

So glad you found it useful, thank you!

[@robertvezina4783]

Love This! Great little project for my Niece and I. You may even have saved lives with this. Gratitude

[@thedefinitive6296]

Really good design! When youre cold and wet, something like this is a lifesafer. Saves you time and energy

[@Mathew0079]

What an idea! It is like reinvented matches in survival mode.

[@Earthpig275]

Cool idea. Haven’t seen anything similar. What is the cylinder you’re using you fill the liquified Vaseline with?

[@LastBushSurvival]

Is a lip balm lid 👍

[@MoonLightCherryBlossom]

Wow 😮 amazing 😊

[@DavidS-t2g]

Safety tip: 1. emplacement the tablespoon amount of Vaseline in container. 2. Then light candle and 3 set container over candle. Have baking powder and dry clean towel nearby in case you need to smother to extinguish.

[@cocolocoflow]

Wow ... love whoever created this ... extremely creative and useful.

[@kalveend]

Does it work with diddy´s baby oil instead of vaselin? hehe.. .NIce tricks. I will definitely try.

[@LastBushSurvival]

I think it will work well too, just try to dip a cotton ball in it and see how it burns, most oils burn very well 👍

[@My_eyesburn]

Thanks for providing knowledge without all the fluff.

[@readtruth6670]

Why not use melted polystyrene to encapsulate? Should be waterproof enough and also flammable with an accelerant present.

[@LastBushSurvival]

That’s a great idea, I will try that out but for example with molten wax the strikers stick to the matches and is hard to pull it out 👍

[@enekoizortega6900]

@@LastBushSurvival pero podrías usar la cera después del primer globo , no es lo ideal pero es una opción

[@prisonerofcapitalism]

Well, that just earned you a subscriber.

[@walksalone175]

Ignore the nay sayers and curmudgeons. This is genius level diabolical. I love it. And I’m going to try it.

[@LastBushSurvival]

Thanks for the support! I really appreciate it. Have fun and good luck with the project! If you need any help or advice, I'm here to help out. Enjoy!

[@alberthabib4220]

Very clever.

[@henridejong2013]

Why using all this plastic balloons? They give off toxic flames when being burned. Besides, the way you show the manufacturing, they are totally not neccecary. Marches are hed together with the cotton and string already and if you would then instead of dunking them in vaseline, dip them in a paper tub filled with wax, you can store them more easy as well. Just a suggestion.

[@LastBushSurvival]

These are made for emergencies when starting a fire is crucial. The first balloon acts as a barrier to protect the matches from the petroleum jelly, that makes the match heads damp and causes them to fall apart. The second balloon ensures the entire setup is waterproof, adding an extra layer of protection against moisture. If you dip the matches in wax, the striker might not come out as easily, so it’s best to keep that in mind. I have tried many different methods to make this and this one is the most reliable 👍

[@Scleavers]

​@@LastBushSurvivalone replacement for the balloons are lubeless condoms, but might be tricky finding them om the store shelves. They're made of natural latex (comes from trees), just make sure about one is not allergic to latex

[@LastBushSurvival]

That’s a clever idea! Thanks for sharing the tip!

[@gerravolkovic]

Идея терочного запала для самодельных гранат очень хороша! :))

[@Speeddemon3]

That's brilliant! I was a boy scout 30+ years ago and I certainly could've used an idea like this. No idea why this even came up in suggestions but sure glad it did! Will be checking out this channel for sure.

[@richardharris5819]

All the thumbs downs are nothing more than city Dolts who need a Taco Bell and Walmart to survive This was very simple and creative design, 10 point

[@LastBushSurvival]

I really enjoyed creating these and they've worked well for me! The dislikes don't bother me, I guess some folks just can’t handle a little creativity outside their bubble. Keep doing your thing!

[@richardharris5819]

@@LastBushSurvival I like the positivity. We need more of that in this world😀

[@tonycleworth8116]

Now this……. Is one of the most useful videos I have ever seen on KZbin! Nice one.

[@LastBushSurvival]

Thanks a lot! Really glad you found it useful!

[@bertpollock318]

It's funny that they're using a lighter to make a Firestarter lol

[@williamallen7836]

You may not always have that lighter. A back up is highly important. I'm sure you laugh at a fire extinguisher in a kitchen as well.

[@beargrizzly6897]

If you're soaked and hypothermic, it's really hard to use wet match with shivering hands🥶🥶 I would highly recommend this to any kayak adventures

[@eduardonava8905]

Great idea , thanks for showing everyone this useful idea . Will be doing a couple myself for my bug out bag and emergencies .

[@guyrollf8956]

Ok, so you used 6 matches to make one firestarter, when one match might have worked just as easily. Nice idea but kinda wasteful. Try building one of those things with only one match and see if it works just as well. Then you've got all that plastic and rubber. Sure, they're flammable, but they give off toxic fumes when burning. Try this instead of tiny strips of plastic, tiny pieces of cardboard, and instead of enclosing it in a small balloon, dip the whole thing in wax and coat it a little at a time until it's completely waterproof and only the little string loop sticking out. Then the whole object is safely flammable, with no toxic fumes from the rubber and plastic. Just sayin, think about it.🖖😎👍

[@wanderingcalamity360]

Happily downvoting this comment because you come across as a condescending Karen. You might have meant well with your post, but it came across quite poorly. If you have a problem with me saying this, consider revising how you talk to people.

[@albertopalos8326]

Cuando te estés cagando de frío en el bosque me dices si derrocho en carillas

[@Vahn-xc1gc]

I'm disagree. This is supposed to be preparing and making DIY for situation. Not actually saving resources in actual scenario.

[@ahayseed654]

Yeh. Saw your video. Good one bruh. 🥶

[@herlak]

Try building .... There is when you lost me in this comment . If you know better go on , show us the better way, make a video . GL

[@alphaomegasurvivalsupply6548]

Try the smaller storm matches, it would burn much better I think. It would have a strong ignition with those, and to much extra material around the matches will reduce performance. Great idea tho and thanks for showing!

[@HotDogWater-t2y]

Looks Very Toxic 🤢

[@LastBushSurvival]

Yeah, I get that concern! These are designed for emergencies, not for regular fire starting. In a pinch, they can really save the day when you need a fire fast.

[@notbobrosss3670]

I feel maybe wax paper instead of a balloon. Going to an antique store or otherwise finding a tin to put them in is a more sound idea. To protect from moisture.

[@thaschwartz]

Great design that can be stored easily without having to take up any space in your bags or pockets. 😮

[@daveh9755]

Try adding a couple stormproof matches in the match bundle to give a little more fuel and ignition time. It looked like the matches almost went out before igniting the Vaseline. For wet or rainy conditions a longer tube containing chunks of esbit cubes could be made

[@barnowl6807]

Try replacing the petroleum jelly with paraffin. I made something similar to this back in the late 60s during survival training. I found that mixing the paraffine with potassium nitrate in small quantities created a faster and much hotter burn. It requires some finesse in the mixing because the KNO3 is not soluble in the wax but must be dispersed evenly. Sometimes you need more intense heat rather than duration of burn.

[@brianlalor]

This is amazing.

[@nataliepotesta1995]

I have to say, that was a really great idea. I would love to make a few hundred for my prepping containers. Because they are completely sealed with petroleum jelly, the matches probably stay dry and, I would think, most likely last forever.

[@davidpaylor5666]

Great idea and a very good demo. Nice work. Another useful thing to know is that rubber inner-tube from a bike tire will burn even when wet, if you put a strip of that alongside the bundle of matches you'd get a bit more protection from wet conditions.

[@alexanderrivera6105]

This was very impressive I appreciate videos like this, thank you