Latapoxy 300 Adhesive by

#latapoxy #professional #diy #tile #pro

[@lyonsailing7520]

Very nice work!

[@craigmoore5394]

That was well done! I loved the slab work. Very tight and clean.

[@egformula]

Thanks alot

[@dolarykapusta]

what’s the pot life of that mixed formula?

[@egformula]

@GQRAL HARNAS the epoxy, 30 min in bucket heats up pretty quickly. Need to pour out asap for longer life time.

[@Pri79111]

So should you always install marble with epoxy thinset to avoid stains coming through or can you use other thinset

[@Pri79111]

Hey man great video. Question,do you need epoxy thinset only to install marble or other stone or can you use other thinsets? Trying to avoid any blotchy spots. Whats your process when installing stone in shower area

[@egformula]

I like to use prolite thinset its really good for stone and specially shower tiles including shower floors its has very little to non sand which would help prevent blotchy spots, its a non sag thinet so helps all the way around

[@Pri79111]

@@egformula do you seal your tile ,if so when

[@egformula]

@@Pri79111Typically the following day after grout but they're are certain occasions or situations when it may require Sealing stone or tile before grout but for the most part would be after grout.

[@Pri79111]

Hey man has any of your tile changed color cause of the grout. I just grouted this marble Pickett tile with gray grout and sealed before grouting but it darkend.

[@egformula]

@@Pri79111 yes that could definitely happen to avoid that you have to do 6 side sealing prior to installing. That sucks yes its happen before.

[@jstray2321]

So did you then grout over the tile with the epoxy or not do any grout at all? Sorry if that's a stupid question.

[@egformula]

This epoxy on this video is to only bond the tile then after that yes also grout with epoxy grout.

[@lyonsailing7520]

Do you seal the tile before setting in epoxy thinset?

[@egformula]

Not necessarily, do you mean if I seal tile because what if I stain the surface of tile with epoxy? If so no I use the E|G Formula to clean it if does happen to touches the surface of tile. Thanks for the comments