The most important thing I've learned from these videos is all AC's have a part called a Chingus. If I stock my van with lots of Chingus I should be good on most jobs.
@jacobjche3 жыл бұрын
Chingus....kahn?
@herauthon3 жыл бұрын
@@jacobjche you might hit a wall here.. !
@pyalot3 жыл бұрын
If chingus does not fix the issue, use more chingus. In dire circumstances, you can chingus a whole AC from the ground up with enough chingus.
@waituntilthebeep3 жыл бұрын
Should you not stock your van with chingi? Need many chingus... chingi a plenty
@crforfreedom74072 жыл бұрын
I use the "WIDGET" brand of chingus.
@danh2673 жыл бұрын
That fact that he keeps digging untill he finds out what caused the problem, I have mad respect for. Even if he has to cut up a compressor.
@nathang.17443 жыл бұрын
takes a lot of patience
@roadwolf23 жыл бұрын
That’s the way any technician should work. Search out a problem until it’s solved not just say “we will have to replace the whole thing “
@HVACRTECH-83 Жыл бұрын
Really? If you're a tech, what do you do?not trying to be rude at all,maybe you're not in the trade but this is what we do as respectable techs
@rick43pen3 жыл бұрын
you could always carry around a few popcorn kernels in your pocket. If they start popping, get the heck out of there. lol
@rakninja3 жыл бұрын
if you're being exposed to microwave radiation strong enough to pop popcorn, you're gonna feel it long before the popcorn pops. basically, popcorn pops by way of water in the kernel turning into steam. that same process applied to the human body is quite painful and results in deep burns.
@Ch0rr1s3 жыл бұрын
@@rakninja humans can sweat to cool down though. Popcorn can't. That's why it pops. And the old school style was in a frying pan not a microwave. So, should you ever happen to have popcorn kernels in your pocket while sitting in a frying pan with plenty of oil AND you don't notice the excruciating heat - get out when the popcorn is ready 🤪
@rakninja3 жыл бұрын
@@Ch0rr1s thing is, sweat doesent work on internal tissues, where microwaves cause heating.
@garyhorvath29573 жыл бұрын
😂😂😂😂😂😂
@mrcrux2133 жыл бұрын
🤪🤣🤣🤣🤣
@laskahvac6663 жыл бұрын
hvac daddy blessed us with TWO 80's brazing montages holy canoli
@2a4c123 жыл бұрын
Dude loving the 80's brazing montages
@jussikuusela73453 жыл бұрын
Later one had some JMJ vibes... one of my favourite synth artists.
@jbgaud3 жыл бұрын
@@jussikuusela7345 Oxygen
@keith_55843 жыл бұрын
1:55 That is a ubiquity UniFi Point to Point Network device. They are usually used for bridging networks from one building to another. Might cause a small interrupt if you stand in front of one. Should be mounted on an elevated platform so it would be a non issue. -for the one guy that might ask later.
@TonnyCassidy3 жыл бұрын
AirMax isnt part of unifi but still ubnt product
@thelol17593 жыл бұрын
Always wanted to try messing with that air fiber backhaul.
@TonnyCassidy3 жыл бұрын
@@thelol1759 havent try it myself but you should try giving those antennas a tinfoil hat, or not the whole antenna, just the horn
@Bryan-Hensley3 жыл бұрын
@@TonnyCassidy it sure is. That's a PBE-5AC-US
@TonnyCassidy3 жыл бұрын
@@Bryan-Hensley look at the horn, PBE have intergrated radio, thats rocketdish with radio on the back of it
@lorenzo42p3 жыл бұрын
39:45 that paint marker.. "nah I don't feel like working today...... OK HERE YA GO!!!!!!"
@georgescott11803 жыл бұрын
It looked like a broken point of a razor blade knife. I love the autopsies. I appreciate the time and effort it takes on your part. Thanks so much.
@silasmarner75863 жыл бұрын
You calling the culprit seconds before disassembling it (putting you on the line!) and it being exactly the thing, shows your immense experience. Great work!
@krz88888883 жыл бұрын
Almost looks like a piece of box cutter blade, did someone break his blade while deburring ?
@layzay733 жыл бұрын
To me it looks more like a part of those disposable Scalpels similar to a #10. Just the very tip is missing and of course the rest of the Blade, but how it got there is a true mystery.
@munboy2163 жыл бұрын
Good eye
@HammysHangout3 жыл бұрын
I thought the same, maybe it was broken off when someone opened a box or cut something and it fell into and never was caught.
@Lord_Nightmare3 жыл бұрын
Could it be part of the round blade of a copper tube cutter? Maybe someone had the blade break when cutting tubing for the original line runs of the system who knows how many years ago, and it fell into the piping and has been floating around inside the system for years.
@Valeij2213 жыл бұрын
" this... satellite looks... intimidating...." I was crying after hearing that! your thought process is awesome lol! i woulda thought the same thing... looks like its braced for war LOL
@Kwaq843 жыл бұрын
Owner shoop da whoop with it when nobody is watching.
@dragonfireproductions7903 жыл бұрын
That's what I do when we install p2p systems temporarily until we get a stable internet connection, we don't wanna cut tubes and have our customers whining about slow internet
@jaysonhines13 жыл бұрын
I busted up on the part when Chris said it's probably giving me herpes or curing my herpes. Lol.
@Syphonfllter3 жыл бұрын
Your channel is really helpful for younger service techs like me, you have no idea. Did my first coil repair today, chilled water coil leak caused a flood in the entire room.. long day. Got a WIF tomorrow so I frequent these cooler/freezer vids a lot, thanks for taking the time to put these up bud.
@HVACRTECH-83 Жыл бұрын
You will find that these types of videos, by good channels like this, and there's not many I watch, are good for more than just apprentice. I've been in the trade 21 years, the reason I like to watch is first, it keeps you on point all year long, we go from focusing on heat for part of the year, then cooling the other part, we tend to get a bit rusty on certain things when we havnt done it for 5 or 6 months, and in this trade there's always going to be something you havnt come across whether it be newer systems you've never worked on or just a problem that's rare and you havnt seen. Never stop learning and you'll be a great tech man.
@amarillohomebrewing46023 жыл бұрын
Been in the business 42 years, you have educated this old dog new tricks and I enjoy your concept on your videos. My specialty is troubleshooting systems ex. HVAC, Controls. I have learned more in the last year with the new toys that are now trade tools that I never had when working, I am now simi-retired. Keep tracking on and THANKS ! ! ! !
@HVACRVIDEOS3 жыл бұрын
Thanks bud , I will be going live on KZbin this evening 7/26/21 @ 5:PM (pacific) to discuss my recent uploads and answer questions from the chat come over and check it out kzbin.info/www/bejne/nGfClat8hJtsapI
@scottjackman66823 жыл бұрын
Thank you
@briant97643 жыл бұрын
This is a great instructional video for someone learning the trade. i would highly recommend someone wants to go into a trade, look into restaurant refrigeration repair. Not a lot of guys want to do it and do it right. If you work for the right company with overtime you can make over $100000 y. You have to work outside a lot in bad weather. But most the time you are able work indoors. Also you never really have a slow time like if you just repair A/C and heat.
@captainkirk77023 жыл бұрын
Your right , it has to be the right company but those are few and far between! Most of them will kill you and you will get burned out. 100,000 yr, you’ll burn out within 2 to 3 years.
@nsaglian3 жыл бұрын
Love that '80s style montage music!
@chrisa2735-h3z2 жыл бұрын
I love how beautifully the wiring was done at the circuit breakers, With it all tidied up and coiled! You don’t see high quality workmanship like that anymore.
@doncervera3 жыл бұрын
I can guess the compressor was running while severely overheating, heat expanding the metal created the severe wear. Once the compressor cooled it lost the ability to compress do to the gap created by the grinding. This may be a repeating proccess: compressor runs under amped with no flow; heats up and expands to the point it regains compression ability; bypassed TXV leads to overheat; grinding again; maybe locks; fuse trips
@xraceboyex2 жыл бұрын
That's what I was thinking. Specifically the gaps in the scroll. Those need very strict tolerances to compress, wouldn't take much to cause the equivalent of a failed valve on a recip
@samuelaranda45973 жыл бұрын
Great job. I retired this March after 31 years in the Union. I was trying to get 35 and 62 age . Unfortunately I had a emergency brain surgery from a hematoma stroke. I worked for JCI/York. I did start up and New Product over view . ECO 1 and 2 box car and Air cooled chillers with compressor drive systems were my babies. Actually I traveled all around the world doing projects. But I am enjoying my family and grandchildren. Keep doing what your doing. Also as well you know the Industry is huge and can take you all over the world. Don’t miss out. Your knowledge and passion can get you there. Also when we said “ We’re going to do a CHINGAS for the LP switch “. I laughed and spit up my morning coffee. That was Hilarious . As a Latino I loved that. Keep it up
@jasonjohnsonHVAC3 жыл бұрын
Even with his videos Chris doesn't give up. I seen your FB post about having difficulty uploading this video. Glad you were able to get it to the people. Pure dedication my dude.
@timothygoltz13723 жыл бұрын
Just started watching your videos a few weeks ago, long story short it got me missing commercial HVACR……I start my new HVACR job July 26th. Thanks for the awesome videos. I’ll be using them to elevate my skills and knowledge!
@tripplewhipperАй бұрын
The music during brazing hits just right
@lauram59053 жыл бұрын
Have you ever had a compressor autopsy that revealed something so bad that you've had to return to the customer to do more troubleshooting and analysis?
@GGigabiteM3 жыл бұрын
The worst case is the compressor grenades itself and sends metal shrapnel through the entire system. No real easy way to fix that but take the entire system apart and flush the lines out so capillary tubes don't clog up in the evaporator or condenser. Scroll compressors are so simple that it's not very common compared to other types of compressors. Swashplate compressors used in automotive applications are more likely to grenade themselves due to the large number of moving parts.
@MattTrevett3 жыл бұрын
Saving this one for later. A 55 minute video means it'll be one worth paying good attention to.
@ICountFrom03 жыл бұрын
Two montage sequences, a hilarious opening line at the (1:00) mark, and a longshot that shouldn't have been possible, but was, and an autopsy!
@sijbrandran3 жыл бұрын
Viewed it, and as always interesting. And revealing some weird sh..
@tr90363 жыл бұрын
Man, you are puting a lot of effort to diagnose real problem, instead of fix and leave! Appreciated all your effort to show every detail and to make videos.
@ralphwoodard6093 жыл бұрын
It was nice to see how organized the person that wired this unit up did his job. Very neat.
@hmrody Жыл бұрын
Chris, you went full Sherlock on this one. Awesome! Great diagnostic skills! This is how you learn. I learned a lot! Great job (both video and repair)!
@donalddarbonne7793 жыл бұрын
I have never thought that HVACR work was easy. But I do appreciate the hard/smart work.
@cincinnatusaurelius83713 жыл бұрын
Props for doing an autopsy to determine what went wrong and why. It's the only way to know for certain. I have always done them and that's how you learn. Much respect for you sharing your skills and knowledge!
@EverythingHVACR3 жыл бұрын
Funny how that works, I just heard you talking about headmaster failures not usually caused by the valve but improper practices, and here we are, great video
@possecomitatus773 жыл бұрын
Great video. The comments about the microwave dish were hilarious.Thanks.
@mrfrenzy.3 жыл бұрын
Actually according to the Viper Wetrag instructions it is fine to leave it on until it cools down. Quote from the datasheet: "After piping has cooled remove putty and place back into jar". It would be an interesting to put a temp probe in a pipe and see what happens.
@JG0en1873 жыл бұрын
I dont know how I found this channel I dont have a background in HVAC but I can't get enough of his diagnostic skills great to watch. Thanks for the videos great job.
@DrummerboysWashersAndMore3 жыл бұрын
I’ve watched so many of your videos, and after all of it I’ve started thinking if I want to go into HVACR as my career. It’s always been an interest of mine and I love watching these videos to know more about what goes on. Keep up the great work!
@David.rivas.alexis3 жыл бұрын
Bro! Go for it! If there’s a technical college near you and it all lines up, take the 1 year course ( you’ll learn the most from the first year, in my experience 2nd year was just learning residential codes/ energy management and a little bit of refrigeration (most important one) but the curriculum I went through will probably be different from yours. I’ve worked for 3 companies (hospital , and two commercial companies) I love the company I’m with now because the boss is good to us but the work is sometimes challenging and it’s almost always something different 👍🏻 I’m from south Texas for point of reference.
@mraroboy29052 жыл бұрын
As a leyman knowing absolutely nothing about HVAC and its technicians I have to say I love your videos absolutely amazing content and always interesting. Thank you for the video
@bondjames2205 Жыл бұрын
Good video thanks for leaving in the mistakes.👍👍👍
@HVACRVIDEOS Жыл бұрын
I will discuss this live on KZbin this evening 6/26/23 @ 5:PM (pacific) come on over and check it out kzbin.infoYfxH9CHqIz4
@philippagliarulo18533 жыл бұрын
I love the 80’s montage moments in your videos 👍So good
@tylerwoodley31043 жыл бұрын
Another great video Chris! My favorite channel for sure
@HVACRVIDEOS3 жыл бұрын
Thanks bud
@billsmith31953 жыл бұрын
Absolutely fascinating.
@aeternusdoleo45313 жыл бұрын
I wonder if whatever polished the inside of that compressor is still in the system. Whatever polished it is small enough to get between the plates, but strong enough to withstand the continuous grinding motion. It'll have run the motor at a very high load continuously. I wonder if the scroll and the shaft now have play between them. Locked scroll but shaft could turn freely so the motor could run - possibly the shaft itself having received some polish as well. You could probably still check for that.
@shine-cg9uf3 жыл бұрын
Great video 📹thanks for sharing 👍
@ninamcclure21933 жыл бұрын
I don't know why but the movie Rad pops in my mind. Lol. Good job guy!
@Defunkedoak122 жыл бұрын
Love the way you edited the brazing sections, always enjoy learning from these videos
@dominikbl82323 жыл бұрын
Really stepping up the KZbin game here Chris! I like the montages with music especially watching during the gym and working out!
@jimdenson23922 жыл бұрын
I’m retired and get to feel like I keep my skills up, from may easy chair. Thanks😉
@gbuss8143 жыл бұрын
I have installed a ball valve in the bypass line. Doing that can save you on those late night calls. Awesome call and video.
@Wolfhound.3 жыл бұрын
that spiral thing looked like it was missing a shiny piece the same size as you found i bet that piece made it through the compressor and got stuck in the valve finally
@gpowerdragon98522 жыл бұрын
keep THE the 80s music I like it's a really chill I also like when the camera is like sitting on the side instead of strapped to your head :-)
@randomrefrigeration45643 жыл бұрын
When I’ve seen those relays I found they were used to interlock the compressor and the defrost heaters
@kimkelley92693 жыл бұрын
Great video and excellent comments about being "On Call". As an older school HVACR technician for a major restaurant chain, I found so many issues that could have been avoided by the regular technician performing their scheduled quarterly maintenance. Very simple stuff like belts, filters, lubrication, listening to the equipment etc. and so much of it was missed or ignored, until YOU get the emergency call at 11pm on a Friday night that an exhaust hood was down or a walk-in was hot. It's been 30 years since I've changed a compressor or handled a torch, but the current technology equipment you are using looks amazing for troubleshooting. I wish I was starting out now and had an HVACR tech with your skills, knowledge and dedication to learn from. It's still fascinating to watch good troubleshooting, and you do a very thorough job while at the same time adding commentary and tips. I moved from HVACR to building automation system (DDC) installation /repair/sales/engineering and that added a world of complexity. I would recommend to someone starting out to look into training on such systems and how they interface to and control HVACR equipment. It was a great career for 25+ years!
@davedeaver78603 жыл бұрын
😀Thanks for always going into great detail! Extremely helpful and appreciated. ☺️
@leviandhiro35963 жыл бұрын
Thank you for posting brother
@BrettWae3 жыл бұрын
Great video, thanks for the upload. Love the montage music.
@jesseh55543 жыл бұрын
I had a head pressure control valve on a liebert that was stuck bypassing. I came up on it and it was running extremely high head pressure, cleaned the coil and it was better but it would slowly start to rise and eventually would trip the high pressure switch. Luckily I found it in time to save the compressor. But it was a fun one.
@nethoncho3 жыл бұрын
That dish is a 5.8 GHz point to point microwave link. Very low power so no worries. 📡😎
@steelwheels3272 жыл бұрын
The piece stuck in that headmaster looked like the tip end of a utility blade
@SOURADEEPBISWAS3 жыл бұрын
Wow. I loved the anatomy of the Emerson compressor. The damage is 😑 wth on scroll But I loved the lengthy video after a long time. I know replacing compressor in night is ridiculous... Overall loved ur montages & appreciate your video.
@rafaeldiegonavarro3 жыл бұрын
Sick retro 80's songs ! hell yea bro
@falloutguy88783 жыл бұрын
Great video Chris great job in replacing the compressor and explaining the situation and the autopsy report with very interesting keep safe dude 👍
@peti140453 жыл бұрын
If you use salt in that ice filled bucket you can push down the water freezing temp bellow 32 °F. Probably not too good for the tank to place in saltwater but you'll get much colder DIY tank cooler than regular water. By the way i like your videos and your explanations! Greetings from Hungary
@peterhodgkins69853 жыл бұрын
I was curious why they don't put a small witch's hat screen on those head pressure control valves... Perhaps you should invent one! ;) Great vid Chris!
@The98deville3 жыл бұрын
Another great video, thanks!
@Uncle-Duncan-Shack3 жыл бұрын
Paint marker decided to be artistic, but it will get the attention of a person working on the system that the receiver is marked lol. That was excellent experience and training for you r assistant in training, a lot gained by being present during that diagnosis.
@karizmatic53 жыл бұрын
You’re so good at what you do! Love your videos. Thanks for taking me with you.
@mogelzz3 жыл бұрын
the music in this episode of trubbleshoting wtht chris was on point, very nice
@karaors89703 жыл бұрын
Nice Job bro 🇹🇷🤳🛠️🛠️👍
@cyborgsheep60773 жыл бұрын
nice vid great muskick, interesting how the dual pressure control used plastic hoses instead of copper
@FlugPoP3 жыл бұрын
Love the " Air Wolf" working music
@SuburbanDon3 жыл бұрын
That's a surprisingly nice wiring job.
@ericpaul45753 жыл бұрын
The marks on the compressor looked like the tooling marks from a worn end mill. Wonder if that was a red herring?
@jonsaircond85203 жыл бұрын
Last failure I autopsied looked the same. Mine was pulling LRA and I put a hard start on it and got it broke loose. It would run but not pump like this one. Scroll looked the exact same. Might have something to do with heat and lack of oil before failure
@rufus23283 жыл бұрын
This was my first impression too, but then he showed the outside of the lower scroll plate. There were also these marks. And i doubt these came from manufacturing.
@HVACRVIDEOS3 жыл бұрын
I will discuss this on my Livestream this evening 7/26/21 @ 5:PM (pacific) come check it out kzbin.info/www/bejne/nGfClat8hJtsapI
@rockwithjerry3 жыл бұрын
I really like the sped up video with the music element added. Nice job! It's cool to see the process even though I'm not an HVAC guy. I'm sure there's a few of us out here.
@herauthon3 жыл бұрын
Lovely Learning + And Delightfull MiDi Synth .oO( dreaming of AmigaDemo )
@suezq74 Жыл бұрын
The humming changed frequencies when you opened the electric panel
@matthewbeddow32783 жыл бұрын
One of the things I always found frustrating when I was on call was that they would call at two in the morning and they would say when I arrived 'oh yeah the problem started in the early evening but we tried to fix it to save calling you out ' Good gosh that is annoying. I didn't work in HVAC I worked in automotive coating plants on the technical side so I was on call across six plants running 24/7 pretty much. I would get called out all the time, even if it was a maintenance job, id arrive & assess the situation and call in who every was needed mostly the ones that had not answered their phones in the first place, they would answer when I called because they knew there would be repercussions if they didn't but often id fix the issue myself. Automotive body paint plants are where my speciality lies and it is a kind of a black art. I was technical director and so most times they would call me I was doing ridiculous hours. But now I have health issues so I'm no longer able to work. So I know how shite call out can be . Love your videos they are awesome I like the technical channels but especially HVAC and your videos are some of the best, :-)
@thomaspeslak2572 жыл бұрын
great job chris!thanks for sharing
@jjmyers642 жыл бұрын
I love your videos. You sharing your videos and ideas and your followers sharing their ideas really helps a lot of us doing this profession to get things done right. On this unit an acid test once the CPR (Compressor) was removed would have been a good idea. Also, just because it was a CPR failure adding a suction dryer and changing the liquid line dryer would be a very good practice to follow. I stopped starting a system after a CPR replacement without the dryers being replaced, I learned my lesson the hard way. Dryers are cheap compared to other components in the sealed system. Adding a suction dryer is a good practice especially if you know you will be returning for further service, you can remove that suction line dryer at that point. I always made my suction line dryer’s easy install, easy removal. When doing this I make it so myself or the next tech can put a dryer on and take it off easy whenever the system had been opened or the chance of a contaminated refrigerant scenario took place. There’s no telling what a failed CPR has released into the sealed system when it fails. I learn a lot watching your channel and I’ve been doing this for 40 years, you can always learn something new. I like to share things I have learned over the years whenever I can. Thanks for the videos.
@tylerboissonneault15173 жыл бұрын
Man, great videos. Keep up the great work. I’ve been hooked on your HVAC videos since I’ve discovered your channel. I have Been in the trade for 5 years going on 6. I can tell you have some serious experience cause you make everything look easy!
@johnlopez25713 жыл бұрын
nice work
@bluedogdataelectrical63033 жыл бұрын
Hey Chris.. great video.. still blows my head off with the electrical installs in the states.. not bad just different.. keep up the great work
@stephenbullock-yn3vh Жыл бұрын
Awesome job.👍😊
@kietZe3 жыл бұрын
wow ..scrolls can take a lot. I've never personally seen one with this kind of failure. Whatever was inside must have made a small way for the refrigerant from the suction to the outlet. Crazy to think about. I've seen similar on R744 systems when people are filling the system to fast. The pressure change is too fast for some valves, and they will break and leave some parts of themselves in the system. btw I'm German and don't know if my grammar or even choice of words is correct. I hope you'll understand
@altus12263 жыл бұрын
Having *just* learned how scroll pumps work, it seems to me that they rely on extreme flatness between the geometry of the two plates to generate pressure; having any missing material at any part of the plates would create points for the pressurized gas / liquid to escape into nearby areas. It kind of looked like there was a bunch of tiny debris in the oil, and there was tons of black / grey crap inside the valve that was stuck open. Some or all of that may have been lining / part of the pump until it finally failed. Perhaps it started with a small amount of debris and escalated as more material was shaved away.
@lwilton3 жыл бұрын
It certainly looked like metal scuffing in that scroll. I wonder if the black goo was metal particles in oil that were ground off the scroll.
@HVACRVIDEOS3 жыл бұрын
I will discuss this on my Livestream this evening 7/26/21 @ 5:PM (pacific) come check it out kzbin.info/www/bejne/nGfClat8hJtsapI
@crforfreedom74072 жыл бұрын
@@HVACRVIDEOS I'd like to see what these look like new to rule out mill tooling.
@Tongaw3673 жыл бұрын
Thank u boss for additional knowledge I'm hvac tech also
@willow0912 жыл бұрын
Sweet Nice diagnosis.
@smartpig1293 жыл бұрын
What are the fucking odds that this is the exact problem I ran into on a residential unit yesterday morning... cracked scroll. Compressing intermittently, motor perfectly fine.
@nathang.17443 жыл бұрын
interesting.. wtf copeland
@nathang.17443 жыл бұрын
that compressor looked farely at least 5+ years old on his.. how old was the one you were working on?
@smartpig1293 жыл бұрын
@@nathang.1744 7. York unit. Pretty sure I know what did it in. Power interuptions in the area. Homeowner got it on film running backwards. Pretty sure a hickup in power caused it to run backwards mid cycle and and it got flooded back.
@reynaldolacayo65943 жыл бұрын
Amazing video, thx for do it ( taking all the work ) you are one of the best !! And I am on the try ( i have my own business for 27 years )
@cjwrenches26473 жыл бұрын
I’m so excited to watch this
@lloydbrown15123 жыл бұрын
Those marking on the scroll head are from the cnc milling process, they are made buy the milling bit.
@brandonhvacants22173 жыл бұрын
I like to cool my fittings rite away with a soaked rag so that it tempers the metal to make for a stronger joint. Helps eliminate vibration stress and prevent future leaks.
@dtiydr3 жыл бұрын
I really like these autopsys!
@frankmontefusco60163 жыл бұрын
Great video!! Watch to the end!!
@AzizAziz-lc2qk3 жыл бұрын
Strainer for head pressure control valve yes but another filter will be a restriction if u already have a filter drier.
@dennis23763 жыл бұрын
I wonder what the manufacturers would suggest happen and what the little part was. Very cool thank you.
@killernat3 жыл бұрын
I work on various CNC machines some of which have hydraulic power packs. dealing with debris in valve manifolds is such a nightmare all it takes is a 1mmx 0.1mm long chip to cause valves especially check valves and regulators to just bypass. seeing a piece that size is terrifying
@rogelebro34563 жыл бұрын
I have a suggestion to check if there was a discharge pressure and suction pressure ...Cut-off the line of suction and discharge line and after that, run the compressor again and close by your thumb for second and release your thumb and check if there was an oozing sound...If not, the compressor was defective..
@lindseyyah13 жыл бұрын
great job
@magmajctaz14053 жыл бұрын
I wonder if the scroll was rotating, but the sealing surface was shot (as seen from the autopsy), causing gas to bypass. Sort of like bad rings on an internal combustion engine.
@captainkirk77023 жыл бұрын
Also too Chris you can clip the pig tail on the mixing valve, head master and there’s a very good chance that it will stop bypassing. But on review of what you found that might not have worked.
@lucianodefilippo54312 жыл бұрын
Thank so much
@Csupati3 жыл бұрын
at the pipe welding i didnt see You use nitrogen flush to avoid copper get an oxid layer , as i know its killing the compressor and the exp valve.
@neilvestervictor1803 жыл бұрын
hard work pays off Chris
@Eddy633 жыл бұрын
I know you can't , but to hear Sister Hazel as background music would be cool ... Nice vid and the Picasso brazing is good stuff ... Lol ... And nice autopsy Dr Chris ...