Lathe Chucks - Types - Pro's - Con's

This video discusses different types of lathe chucks and the not so obvious differences between them. If you are considering a purchase, or have a specific favorite, you may change your mind after watching this. Full of detail, I guarantee you'll get something out of it. Don't Miss this One.

[@scootertramp4355]

Another safety tip that could be offered is this: If turning the OD on piece of pipe or tubing and clamping using ID jaws, pay attention to the heat developed in the part. If a part gets too hot, it can expand enough to come loose on your jaws and disengage. Don't ask me how I know this..........

[@oddjobbob8742]

A decade or so ago buddy of mine was a machinist for a company making large printing machines. One of the parts he turned was the journals for the platens. The bearing were put in place after they were heated. He always cooled the journal area before he made the final cut. He heard guy who replaced him neglected that step and cost the company a lot of money before he got a call from the owner for his “secret sauce.”

[@jairojaxon9504]

instablaster

[@tonywildschutz1646]

you talk about using a spider for boring jaws on a chuck ,explain how to use them ,please

[@toddharris3346]

Joe - I have to say, man.... THANK YOU. This video is no more brilliant than any of your others, really, but you just keep sharing quality stuff. Seriously... THANK YOU. I own a design/fab studio and we are self-taught machinists. I think we're clever folks, but we're definitely self-taught. You, Tom Lipton, John Saunders, Mr. Pete and Abom have shared an unbelievable number of hours and hard-knocks lessons. Please.... keep it up!

[@joepie221]

Thanks. I am honored to be included in that list.

[@jeffryblackmon4846]

You've put a lot of thought into this before recording this video. I appreciate all the information you've conveyed.

[@Redmech80]

You are one of my favorite KZbin shop teachers. Thanks so much

[@joepie221]

Thank you very much.

[@tsmartin]

We had a 1340 Clausing in our shop until it was lost in a fire. Great machine. I was taught to always tighten up all the pinions on a scroll chuck ... when available. Same thing with a drill chuck.

[@EDesigns_FL]

If I could only have one lathe chuck, it would be a four jaw. Likewise, if I could only watch one KZbinr channel, it would be your's. I learn more from your videos than I do from all the other producers combined. Thanks:)

[@joepie221]

Thank you very much.

[@LabRatJason]

Man, I love your straight-laced no-nonsense presentation style. Thanks for putting these videos on!

[@joepie221]

Thanks. fluff has its place, just not on machining videos.

[@LorenP]

Great video! I am going to mark the face of my chucks with the visual safety mark. I have seen chucks with broken scrolls from guys over torquing chucks at the outer grip range.

[@jeffreylewis145]

Great content. Love the focused topic format. I watched it stoned off my ... on meds in a hospital bed after a medical procedure. Tomorrow I’ll take another swing at it.

[@joepie221]

get well soon.

[@carlpenney901]

When you retire you should get your teaching degree. You could teach young people in trade schools to have the passion that you have. I love the way you teach the theory in class and then go out to the shop and give a demonstration. A true teacher! There was a time when you keep your secrets that was a way you keeping your job. Now with the internet you can learn just about anything you desire. Keep up with the videos.

[@theyhatedHimcuzHetoldtheTruth]

This channel is a hidden gem.

[@cossiedriverrs]

As usual, Joe, you are an inspiration.... Trouble is, it's 11pm, and all I want to do is go out to the lathe. When bed would be the better option! Well done, Stan, UK.

[@alanstapleton3818]

Now we need a video on how to make soft jaws for those of us who have never done it ?

[@dougcoleman9126]

I have been a toolmaker for 38 yrs an it's always nice to learn new things thanks

[@bigdawgsbusa2]

Thanks Joe, the things we don't think of when doing mundane tasks, then you have that one critical part and wonder why it can't pass spec. Great video very informative

[@taogden]

Wish I could have seen this when I first started piddling with this stuff. Great video Joe, for a new guy to this stuff you save me years of goofing up.

[@jimsvideos7201]

That safety mark for maximum jaw extension is one of those alarmingly simple why-didn't-I-think-of-it ideas.

[@priority2]

As a newbie “self-taught” wanna be machinist, your videos are GOLD! This one especially. 😊 thank you!

[@vaughanlatham1412]

Joe, Thank you for taking the time to put out the videos, you have helped tremendously!

[@therussianmachinists2409]

In our shop, we use 3 jaw check to hold almost everything, even squares... you have to be a bit creative :) Another issue people have on 3 jaws is that "its impossible to make them run true". Sure, but you can adjust that quickly by slapping an indicator on the part and tapping the high jaw to fix runout issues. Anyway, great video Joe. Thanks for your videos. Jimmy

[@marcellemay7721]

I do that all the time with my 3 jaw chuck. An old timer showed me that trick. It's very useful when you have to flip a part end to end and make the concentricity match. I can usually get it within .0005" concentric. My 3 jaw also has 3 tightening screws for the scroll, sometimes tightening one screw more than the others will move it enough to get it concentric.

[@therussianmachinists2409]

@@marcellemay7721 I see. I usually tighten only one out of three, but check all 3 to find which one makes the best concentricity. (They can be different ones through different diameters for some reason) and yeah, tapping helps when you need it. I also found that the high point wants to be towards the operator. So if your tightening the key up top, the high point will tend to want to be about 120 deg. to the left. This is because the spiral plate in the chuck has slop and shifts towards the left when tightened. Sorry for the long message Haha but this stuff fascinates me :)

[@drevil4454]

I've watched this particular video a couple of times. I learned from it, bought the right stuff and applied everything I learned to great success. I still find myself coming back just to see how simply Joe explains everything. Guy is genius

[@ianbertenshaw4350]

That mark on your chuck is brilliant and simple !

[@joepie221]

In my opinion, they should come with one.

[@ianbertenshaw4350]

Joe Pieczynski agreed! I’m surprised that the top end units don’t have something like that and considering adding a small line on the chuck face would cost next to nothing it would be a nice finishing touch to a quality chuck . I wouldn’t trust one on a cheap chuck , i think i would rather do it myself and at least then i know it’s in the right spot ! There is a lot of food for thought in that video Joe , i think i will have to watch it a couple of times to make sure it all sinks into this thick cranium of mine ! Thanks for the video and all the effort you put into them Joe - i always learn something from you !

[@christophercullen1236]

Joe I am not a machinist but the chuck to me was the main tool. This video explained alot of techniques and methods and myths about Chuck's. I have found all videos very informative but this was the best for me. Christopher

[@davidmcduffie1398]

Another in a very long line of great videos, Big Thanks Joe. Keep Coming !!!

[@davidsmith882]

The mark will be added to all of my chucks as soon as I get home. Thanks for another great video.

[@duckslayer11000]

I love how accurately you can index parts in a 3-jaw with bored jaws. However my work usually requires a 4-jaw to accurately dial in various diameter parts during repair work. What's my point? Listen to the amazing advice Joe delivers and master every technique to become the most valuable person in the shop.

[@joepie221]

Wow. Thank you for that.

[@jmtx.]

Thanks for covering a whole lot more than I've ever wondered about lathe chucks.

[@joepie221]

I had a friend that used to say "Its impossible to know what you don't know". I hope you got something out of this video.

[@woodscreekworkshop9939]

Great timing as I’ve been going through the repeatability and reliability factors of my current 3 jaw chuck and potential replacement. I learn something from every one of your videos. Thank you!

[@billchiasson2019]

Great video! Lots of good information always look forward to your videos, thanks for taking the time to make these.

[@ronpeck3226]

Thanks Joe, future generations owe you one!

[@joepie221]

If there is any way I could collect now, that would be OK by me. Just kidding. Its good to know some dads/moms out there may pass this stuff down to their sons/daughters. Nice legacy.

[@metusa666]

Thanks for the info Joe im still learning new stuff every time i watch your channel

[@JlerchTampa]

25:00 I was successfully triggered and was ready to argue, then you said "As long as you keep the sequence" and I went "Huh..." then wandered out to the shop and tried it, damned if I didn't learn something new about a topic I thought I knew all the things about! Thank you!!!

[@joepie221]

I knew a few of you would want to explode. i had to clarify that.

[@JlerchTampa]

@@joepie221 I'm glad you did, this info goes into my mental toolbox and will be used to win a bet one day! :)

[@jeffreyrood8755]

Great video! I'm just getting started doing some wood working, and about to buy a the first Chuck for my wood lathe. This helped me learn more about what to look for and how to use it more effectively! Thank you for sharing your wisdom.

[@bulletproofpepper2]

Thanks for sharing all the great tips and tricks.

[@despui]

Video like this that make this channel my most favorite to follow. Thanks Joe.

[@joepie221]

Thank you very much.

[@cumminsscout]

I thought it was going to be a little basic of a video for me but there is good stuff in it I hope I can remember forever! Thanks!

[@cogentdynamics]

Thanks for expressing the practical realities! Very well put.

[@wotjonsez2560]

Hello Joe. Nice video. Good old fashioned common sense, all those things that should have been explained to us when we were apprentices. When I was a lad one of the biggest crimes in the apprentice school was leaving your key in the chuck. You soon learned to not only remove it but to put it in your pocket when you left the lathe. If you did not one of your mates would put it in the chuck for you, wait until you were at the other side of the shop and then shout ".... you've left your chuck key in", loud enough for the foreman to hear. The foreman must have been a brave man, can you imagine being in charge of thirty young lads in a shop full of dangerous machines? The other day I aquired an odd chuck, I have put a short video up 'Unusual lathe chuck' , I would appreciate it if you could have a look and tell me what it is for. Best regards, Jon

[@matter9]

200th like! Glad to see a demo of your evidently rather deep knowledge. for the betterment of the trade, Thanks for sharing, Joe

[@johndonlan5956]

Joe this was definitely one of your best videos ever!!!! 🤓

[@MaxTalbot69]

Great video Joe, solid information which should help a lot of people avoid mistakes with their chucks. And thank you for covering the sequence for reinserting the master jaws. I worked in production shops for many years and mostly with 18 to 24" 3-jaw chucks, and some 32" 4-jaw chucks. My first shop had old equipment and beat-up tooling, so we had to improvise a lot. A job came in which, in retrospect, should have been run on a boring mill: large parallelogram-shaped blocks which needed a ~4.5" hole bored through them. We ran it on a Warner & Swasey 3A turret lathe with a special fixture pinned and bolted to the chuck face, with one top jaw providing the sole clamping force. The sequence was: face the outer side about .300", drill 1-9/16" through, drill 3-5/8" through, then bore to size. Tedious and scary job, and I ended up doing most of them. That's my one-jaw chuck story!

[@toolmaker5150]

Great videos Joe. I have been in the trade 30+ years. I still remain and will always be teachable. I get a lot from your channel. Thank you ! Dave

[@joepie221]

Thanks for the comment. I take it as a compliment.

[@mtnphot]

Thanks, very informative and useful. I learn something every time I see one of your videos

[@mystified4074]

Thanks so much for Joe for sharing your experience/wisdom. This is a real service to the machinists community and not going un-noticed!

[@joepie221]

I feel very welcome here. The numbers really show some appreciation and I thank you all.

[@robertlark7156]

As always an excellent video. I learned several things I had never thought about before. Heading to the shop to mark the number 3 jaw on my 3 jaw. Keep up the great work.

[@IdahoSpudnick]

Sharing your great wealth of knowledge is a credit to the trade. Thank you for your time.

[@joepie221]

Thanks for watching.

[@joewhitney4097]

Very interesting for a soon to be hobby machinist, (me). I enjoy and have learned so much watching you, Adam Booth, Keith Fenner and others. This was very educational to me. I was so novice to the craft I was not sure exactly what a "soft jaw" really was. This will help me a lot going forward as all of your video's have or will when I getted started. Thanks again Joe. 👍👍👍

[@StuartsShed]

This video is absolute gold. I’ve watched it many times - I finally obtained a 3 jaw chuck with adjust true and soft jaw capability, so giving myself a refresher on good practices. 👍👍👍👍👍

[@joepie221]

Glad it helped!

[@Bibibosh]

You’ve attained a mass amount of knowledge and experience! Please tell us every little thing you have in your bank of memory!

[@ctdbass]

Glad you covered soft jaw bore diameter. In my shop we cut a lot of rings for bearings (CNC lathe work). Maximum out of round varied .002 to .006 depending on the part. Maximum flatness/parallel deviation .003 typ. We held the parts in pie jaws and bored them to the exact nominal outside diameter of part (which dep. on the customer had a +/- .001 or .002 tol.) And then held at very light chuck psi. You could always tell when guys rushed the jaws on their set-up. The parts would run way out of round and/or way out of flat. Jaw diameter and torque are absolutely critical and should not be overlooked or underestimated.

[@ctdbass]

I'd like to add that the bigger the part the more extreme these effects seem to be. I ran and set-up the big parts (8"-18") and the rest of the shop ran the smaller ones (1"-8") and the chuck pressure in flatness of the jaws was extra critical. Bore size mattered across the board.

[@wwilcox2726]

@@ctdbass the size matters due to what is called "tunnel strength". It requires more force to crush eg. 1/4" wall 1" diameter tube than a 1/4" wall 6" diameter tube. As an example this is a significant factor in choosing wristpin diameter for performance engines vs. wall thickness. Wall thickness to diameter affects dimensional rigidity.

[@MalJ-eb7nv]

Thankyou Joe. A really good practical video based on your wide exoerience.

[@user-ze4jw9wb8q]

As a newbie, I really appreciate the subjects that you do. Very well explained and the drawings help me a lot also. You are a great instructor. Thank you.

[@joepie221]

Awesome, thank you!

[@dustinbrewer2541]

If you draw your circle with permanent marker it will not erase while you are showing your examples. To get the permanent marker off, just draw on it with the dry erase marker and let it dry. Then erase it like normal and the permanent marker will be gone. I used this when I used to teach and it saves a lot of time. Thanks for the video I learned a lot and thought I could give back some with the permanent marker trick. Have a good day everyone.

[@pwpia5461]

Great job Joe!! I'm a 4 jaw guy...mainly because I do more repair work and things that have only one shot to be repaired. I have same 13 x 40 as you....I can agree it is the best lathe out there...and it was built in 1997...still tight and accurate. I was on sack lunches for years until I finally got one! My 4 jaw (Buck) has jaws that the top is removable ...thus I can use soft jaws and even weld to the jaws if needed. Keep up the great work....in the next month or so...I have a gift coming your way for your Colchester ... Hope it knocks your socks off....

[@rtkville]

Excellent video Joe! Very informative! Thank you....

[@loydsa]

Thanks for passing on your knowledge Joe, great video. Best Regards Sarah

[@markhedquist9597]

Learning as much as I can from you before I even TOUCH a lathe. Thank you!

[@joepie221]

Glad to help

[@imaginemetalsllc8991]

Fantastic. Don't worry about "too much time at the white board". You're doing a great job covering the material both on the board and in the shop. Soft jaws could be a good topic for their own video. They are so versatile and potentially misunderstood. Thank you for the time you put into your channel.

[@peterheuts7738]

Thanks for the info! Great video as usual!

[@Smallathe]

Loved the safety mark on the chuck. I will put it to use! Thanks!!! I really enjoyed the explanation. That is a wonderful lecture for novice machinist (I am one). I fully agree on listenning to the lathe/mill (after putting earplugs) and they do tell you if something is wrong. I'd say experience is the second best yet our greatest teacher (a real teacher will not let you make catastrophic/dangerous mistakes). I willingly "pay" for my mistakes - making wooden models as learning aids ( and some real mistakes, of course) and learn from my errors, making sure not to repeat them.... (hopefully, lol).

[@jamesdavis8021]

Thanks for another great video,Joe. I have learned a great deal from you.keep it up 👍

[@TomMakeHere]

Great video Joe! I like the marking idea on the chucks, I'll have to do that

[@joepie221]

Its a very good idea for safety.

[@AmateurRedneckWorkshop]

Very informative thanks Joe.

[@youtube.youtube.01]

Joe - you covered it all! I really benefitted from this video and made some well-informed choices - thanks to you! Keep Well!!

[@joepie221]

Glad it was helpful!

[@mikemoore9757]

I stumbled on to a Cushman self centering 2 jaw chuck years ago. It sure is handy for making bullet molds with a cutting cherry on the milling machine. Just sqeeze the mold blocks together. Works great. Good video, sir!

[@DudleyToolwright]

I thought I knew, but only thought... Another really informative video. Much appreciated.

[@ChrisB257]

Have to agree that a 4-jaw would always be my choice if that was all I could choose. There are for sure many considerations with chucks and you usefully covered a lot of ground. Thanks Joe.

[@gadget01]

Thank you for the useful, practical lessons. Keep them coming. Greetings from Italy~

[@joepie221]

Greetings back at ya from Austin Texas USA

[@James-fs4rn]

Thanks Joe. Good stuff as always.

[@davidbawden6567]

I always get something out of you video's Joe, your a truly amazing machinist..

[@joepie221]

Thank you very much.

[@kgaby370]

Thanks Joe! Super helpful to me. Keep up the good work.

[@dannyl2598]

Great lesson. Thank you so much.

[@drjohn148]

Once again, Joe, Many Thanks for doing the video. I have had my 3-jaw marked for quite a while, following one of your earlier videos. I've been thinking about a D1-5 4-jaw scroll chuck for my lathe - a bit expensive but might be worth it. I learned from the video.

[@toolbox-gua]

I loved this video. I had a motorcycle accident on Feb-25 and I’m behind my favorite channels and just started to catch up, so when You say “bear with me” I’m just intrigued what is comming. Thank you.

[@joepie221]

I have many more to offer, but the shop is busy at the moment and time is short. I hope you recover soon from the wreck. As a fellow biker, I hate to hear someone went down. Hows the bike?

[@toolbox-gua]

Thank You Joe (if I may treat You so friendly). I have not touched any machine shop machine, but watching your videos is just plain joy and will not miss a single video. The wreck, I missed it because I closed my eyes during the tumbling, but although it was pretty serious thank God I’m fixed and onto a long recovery. As for the bike, I was very responsible and took good care of her, only a bent mirror and broken turn-light. Not a single scratch. On the other hand I had 3 surgeries, left ankle reconstructed, left knee recontructed, 8 left ribs broken, spleen gone and a cesarean that mist have been of tweens (all these wearing good protection). So, I’m very thankful for my Wife that participated just on time to save my life, for God above all, drs that fixed me well and the BMW r1100gs in perfect condition waiting for me.

[@tapp1t]

Thanks Joe, informative as ever with a few jems sprinkled in.

[@TAWPTool]

I love it Joe! Great review/summary/reference of chucks! Thank you! Saved.

[@joepie221]

Hey Guy. Thanks for checking in. I hope all is well.

[@oleringstad6615]

Perfect video channel! Love to learn from your long experience, and also I have encounterd many of your topics, and learned the "hard way" Thank you Sir!

[@joepie221]

Thanks for watching.

[@Wulgreath]

Thanks for the video Joe, I'm currently wrapping up a CNC class with lathes and I definitely walked away with a few more tricks. Keep up the good work, learning in MA

[@joepie221]

Be aware of the pressure setting for your CNC lathe chuck. It is a setting that can be dialed in.

[@boblasley5640]

Thanks for the continuing education Joe! Marking my 3 jaw as soon as I get a little shop time.

[@Robonthemoor]

You spell how you like Sir Joe; As always flooded with information, you really put your heart into ever word, I for one just can't get enough. *****plus

[@joepie221]

Thanks Rob. Always good to get a comment from you.

[@donmittlestaedt1117]

Thanks Joe, a really great refresher.

[@unclebobsworkshop1865]

Hey "PROFESSOR Joe" Love this format. I know it takes a lot of work, but any time you can do videos this way it will be appreciated.

[@davidgrube849]

You did this video at a good time for me. Not only was it very informative, it saved me from buying a 6 jaw chuck.

[@joepie221]

6 jaws are fantastic and provide superior holding power, but the parts better be guaranteed round.

[@williammacmillan6247]

Good material Joe. This makes me feel motivated to mention the condition of old, abused or poor quality machines that have "Bell Mouth" jaws. When you encounter a machine that has this condition the problem presents itself in holding stock correctly. You will observe that the jaws are actually holding tighter back in the throat of the chuck rather than out at the tips where you would ideally like it to be. At times machines with a really bad case off bell mouth will exhibit chatter when you have material stick out that you THINK is acceptable yet it still chatters. That is because you are actually holding the part 2 inches back in the chuck effectively making your stickout longer than you think it is. This will often really show in parting operations where it starts honking like a beast with 1/2 inch brass for example. Bell mouthing can be a really dangerous condition when holding small or hard stock out at the tips. If the bell is bad enough parts can literally spit out or become dislodged and begin to run out of true. A person can check the jaw contact surfaces with a test indicator to see if they are in fact flat to the tips. If they are and yet it still exhibits this issue there can be a situation where the slots in the jaws are too loose in the body of the chuck. Physically trying to rock the jaws in the body will often show this condition. This sort of thing tends to show up on poor quality chucks made in China.. They use the lowest grade castings for the chuck and the carrier jaw. Over time the parts wear and slop is created at the chuck slot ...then the rocking results. More food for thought. When looking at machines examine the chuck wrench hole and the chuck wrench. If the hole in the chuck is not properly square or the wrench is showing signs of material displacement on the corners be motivated to find out why. If the T wrench handle is looking more like an S...someone has been torquing the snot out of the chuck. Chances are it's not going to be a great performer and could motivated the need for chuck replacement.

[@peterkennette9865]

A spyder can be made to hold the jaws adjacent to the work holding points i.e. the angled surfaces allowing loads to be placed at the end of the jaws. Doing this on a very worn Hardinge chuck restored it to usefulness. Someone apparently put a ring outside the jaws and bored it "true". With substantial wear the chuck was now useless. If we could post a photo in comments I would show a tool I made to fix this one.

[@eachday5705]

Excellent as always. Like your channel very much

[@rodhenry4862]

Another great video , I just marked my #3 jaw what a great idea as well as a safty feature! Please consider making a "spider" video and demonstrating how you use them ! Being a new (old) guy I'm learning a lot from you and a few others too! Thank you very much!👍👍👍👍👍

[@joandar1]

Hello Joe from John. As usual I learned something new. I have always been wary when extending the jaws to close to the limit of the scroll on a three jaw, I will now take your advice as it is a splendid safety feature for those unwary. Thanks again for sharing your knowledge, John, Australia.

[@joepie221]

Thanks John. Give yourself at least 1 full scroll engagement, but realize you can't torque the life out of just one tooth. Its a warning mark for multiple reasons.

[@joandar1]

@@joepie221 Thanks Joe I understand all that you have said and always do this and limit torque at the extremes of chuck travel. The Idea of the Mark had not come to my mind. That is a no/brainer in a way so again thanks. John.

[@martineastburn3679]

Nice to see new versions of Buck chucks. I have two on my Sheldon 11-44. 11" swing 44" bed (under the head to the back of the tailstock. More like a 30" usable bed. :-) Dad and I bought it in 1952. G-Box and tooling. In a Hardware Store ! Nice lathe to this day.

[@christaylor528]

Thanks Joe, really informative. I would also like to see more about using spiders. Chris, UK

[@brainfornothing]

Great info ! Thanks for sharing !

[@roberthiggins1142]

Very informative video's, thank you for sharing that knowledge.

[@tmiller499]

We could talk for hours (about anything really I think), and you could teach me so much about machining (which I'm learning about right now)! I still have a ton to learn, but I love this topic. Thanks for the video.

[@joepie221]

Its a vast field. I'm sure we could learn something new everyday.

[@WinkysWorkshop]

Fantastic video. I have a lot to learn and I'll be watching this again soon. I'm also going to watch your video on a rotary table again. My knowledge is very much lacking in this area. One thing I think you should have mention is the effect of overhang on smaller lathes (South Bend, Logan, Atlas etc.) My Logan 820 has a 1-1/2" x 8 threaded spindle and a chuck that has a very deep body and jaws with chatter like crazy. I'm talking about the distance from the tip of the spindle to the where the work is hanging out of the jaws. My original Logan chuck has 2.75 depth and an aftermarket chuck I have is over 5-inches. I'm glad I have the capacity of the larger chuck but it is not ideal. If you are interested and want to see an example of what I am talking about search youtube for: "Power Hacksaw Restoration - SawMaster 3114" and jump to the 10:20 mark. Thanks!

[@miles32323]

Awesome info joe!

[@Xynudu]

Great video Joe. Covered the subject well. Cheers Rob

[@joepie221]

Thanks Rob.

[@joepie221]

Thanks Rob.

[@jamessherrill3454]

Thanks for the video Joe, very informative.

[@joepie221]

Thanks.

[@Smallathe]

Got carried away...Thank you for an excellent video!!!

[@joepie221]

Thanks for being a subscriber. It says a lot.

[@rtkville]

Second time watching and glad I did, lots of good stuff! Thanks Joe!

[@joepie221]

It certainly gives you somethings to think about you may not have considered before. Thanks for watching.

[@rtkville]

Yes, it really does thank you for this demonstration, although this was not the first I watched this video it sank in this time! You are the man!

[@oddjobbob8742]

Excellent video. Never wasted any time watching a Joe Pi YT. Always an investment.

[@joepie221]

Glad you enjoy them.