Launch CRP919e BT coding the BMW FRM module after repair with CG100pro.

[@EIRK2046Y]

Nice work. Thank you.

[@YOYODiagnostic]

👍

[@vladalexandrucojoc921]

Hello Yoyo în me opinion is very good this tool, thank you for The time and knoledge. All the best

[@YOYODiagnostic]

Thank you for your support 👍

[@Doctor_88]

I have the same model of Launch bit I bether perfer Autel scaners..bdw good video,like to wach your videos

[@YOYODiagnostic]

Autel is a great tool too 👍

[@malekashram1185]

thank you man for this information

[@YOYODiagnostic]

👍

[@ChangoeMotorsport]

🤣 I agree with you! Some of them they like to drive BIG cars but got a small wallet to fix it🤣 * Not all of them * Great video again!

[@YOYODiagnostic]

👍

[@Diddy291]

You can connect it via usb as well.

[@c.adamscott2312]

I emailed and suggested Topology for this one and Launch isn't planning to do that unfortunately

[@YOYODiagnostic]

@@c.adamscott2312 thanks for the info 👍

[@hellcat1988]

Have you lost the ability to program tire pressure sensor id numbers into your vehicle computer with your scan tool? The one I bought allowed me to program in the id codes for 2 of my new tire pressure sensors on a 06 dodge grand caravan, but I didn't do all 4 at one time. After I finally changed the other tires, the reader wouldn't connect to the van any longer so I updated the software on the scanner. Now, it will no longer allow me to do anything but see the id numbers. Even then, I have to fight through various menus to get to that point. The scanner I bought is the non-bluetooth version by the same seller.

[@YOYODiagnostic]

This is a software problem. Did you write to the company Launch about this problem ?

[@hellcat1988]

@@YOYODiagnostic I've gone back and forth with them to the point that they admitted that they can't push the old software as an update to fix their screw-up, and they'd rather send me new proprietary tpm sensors and a tool that is supposedly going to work to get the vehicle to recognize them free of charge, rather than fix the software and push a new update.

[@rud_01]

hello can you help me, can you tell me if that tool read the security pin from a 2005 astra h ,thanks

[@YOYODiagnostic]

@@rud_01 I didn't try it..ask company Launch

[@ZaxZent-f7z]

Great video ❤

[@YOYODiagnostic]

Thank you 👍

[@fanelx06]

Hello,what do you recomend Topdon artidiagpro vs launch 431pros crp919x bt. ?

[@YOYODiagnostic]

Hi, your comparison is not correct because artipad can do coding and Launch named by you does not have this function. Look well informed and read carefully what the manufacturer writes. Launch CRP 919x cannot do coding, this one is cheaper, For 100 euros more you buy CRP 919E which fulfills the same conditions as Artipad named by you. To summarize, they all belong to Launch (Topdaon, ThinkPad, thinkcar, Kingbolen, Artipad). All these companies are children of Launch.

[@fanelx06]

@@YOYODiagnostic ok thank you very much, i think best choice is crp919E

[@Flash-bu3ug]

hello , i watched your video about VCX and i'm confused between it and scanmatik 2pro i'm new to programming and diagnosing and i'm searching for the best pass-thru because i'm a beginner what do you recommend for me i will mainly scan European cars (Renault - mb - bmw - vw - fiat ..etc ) thank you

[@YOYODiagnostic]

Hello. What do you want to do scanning the car or do you think about tuning?

[@Flash-bu3ug]

@@YOYODiagnostic scanning and diagnosing and programing the ECU (Delete EGR...etc) programing gearbox not sport tuning just basic maintenance or problem diagnosing

[@YOYODiagnostic]

I think you are confusing things a bit. EGR delete belongs to the tuning programmer, which is ruled out because this is a j2534. It replaces certain original diagnoses and that's about it.

[@Flash-bu3ug]

@@YOYODiagnostic yeah i searched about it but now i want a suggestion from you for a scanner i can start working with is it the VCX or Launch or Autel or SM2 pro original

[@YOYODiagnostic]

@@Flash-bu3ug Again your comparison is not good. Launch and Autel have their own operating software. VCX and SM2 pro are based on other software, they do not have an operating system. So it is clear that Autel or Launch is more efficient.

[@carlosjkc]

Hi. I have a question about this tool. Can it do mercedes scn coding? Thanks for your time And continue with great videos.

[@YOYODiagnostic]

Hi. I will give it a try and I'll let you know or I will make a video.

[@anvinashok7589]

Does this have scn coding

[@YOYODiagnostic]

It has an option for SCN but I didn't try it.

[@mohammadorabi2642]

Can this tool code bmw e60 szl?

[@YOYODiagnostic]

Yes

[@smarty0604]

If you are stupid you must pay 😂😂 love it , great vids as always mate , couple of questions I might have missed you saying on the video ? Can you use off line or just internet only ?? And can you use after sub run out or is a brick ? Any idea what the update cost are ? Thank you

[@YOYODiagnostic]

You're right, I missed some information in the review, thanks for reminding me 👍 The license is about 150 euros per year from what I saw. After the 2 years of free update, if you don't want to pay for the license, the programmer can be used without any problem, only that you can no longer update. Yes, it can be used offline, I used it and there is no functionality problem, only in the case of the Ford brand, which requires an internet connection if you want to do certain resets.

[@ahmadlbl]

Hi friend, bro can we said that this type of launch offer online coding for some car brands

[@hitechrr]

I have the same scanner. I don't like it. My xtool m30a works better for a lot less money. I would send it back if I bought it from Amazon. I bought it direct from Kingbolen, and I would have to pay for shipping and a restocking fee.

[@YOYODiagnostic]

@@hitechrr that's your opinion and I respect it, but you have no way to compare this programmer with launch, Xtool doesn't do coding on any car, I've used several programmers from this company, for scanning they're ok, the rest leaves a lot to be desired.

[@jacbac7506]

Thinkscan 689bt is much better with lifetime updates! it's got key coding ecu coding as well and it's very fast..

[@YOYODiagnostic]

@jacbac7506 who said that this one doesn't do coding and programming? did you hear from me that it doesn't have this function. It is possible that other programmers have additional functions but don't forget that they all belong to the Launch company. I said this before, Topdan, Thinkdiag, Kinkbolen are all companies that use the Launch software.

[@jacbac7506]

No , what I meant was that yours doesn't have lifetime updates! and this is very important difference...