I find these videos really helpful. There's always some great tips and the right way to use interfacing has been a bit of a mystery until now. Another tip I picked up recently was to put greaseproof paper on you ironing board underneath the fabric and interfacing to protect it from the glue. X
@jolivelaughloveandcreate165 жыл бұрын
I feel so knowledgable after watching your tutorials. Thanks 👍🏼
@louiselill15285 жыл бұрын
Thank you Lauren some good tips . Love the fabric you put interfacing on its beautiful
@ethelcowieson16965 жыл бұрын
Very useful information! Thank you for making these tutorials.
@jodieroundtree4885 жыл бұрын
Thanks! Helpful. I needed that 2 months ago when I was having mysterious trouble with a coat- yup. Took it apart and ironed in interfacing
@francoisethepot94145 жыл бұрын
thank you very much, Lauren, for the instructive tutorial I did not know about the woven and not differences though they had stability just the same
@jennysutton49885 жыл бұрын
Very helpful - really great video series. Using the wrong weight in interfacing has caught before. So matching the weight to the fabric makes sense. I did assume that the weight might change based on the part of the garment - i.e. a waistband might need a heavier weight interfacing than a placket or a collar. So I am glad you clarified that! Thanks.
@elainepepperman95145 жыл бұрын
Hi Lauren, could you do a video on the different types of crepe. For example triple crepe, viscose crepe etc etc I have no idea. Your videos are brilliant Thanks you Elaine x
@LaurenGuthrieGhani5 жыл бұрын
Hi Elaine, I do cover that a bit in my video sewing with slippery fabrics, but I'll add it to my list anyway :)
@mscatzord5 жыл бұрын
I always enjoy your sewing tips! I missed hearing about knit interfacing and types of stretch...
@india2395 жыл бұрын
Living in Switzerland as I have for eleven years makes a Scottish voice very nostalgic for me
@mattyice75464 жыл бұрын
This video is perfect for me! Thank you! Also you are extremely beautiful!
@jaclynmoylan19055 жыл бұрын
Thanks so much for this. Very helpful as always!!!
@joycelondon16395 жыл бұрын
Hello 👋 👋 Thanks for sharing from Atlanta Ga USA Beautiful. Helpful First time here 💘 it.
@hjkennaugh5 жыл бұрын
Thanks Lauren. I have been sewing for many years and often wonder if I am using the correct interfacing. It is good to have this overview because then you know everything that is out there which is not perhaps all available in a particular shop. Will you be doing one on neckline, shoulder and hem stabilisers too coz that would be very useful. I have stuff I have bought that I am not even sure what to use it for, though I definitely needed it at the time. Lol
@LaurenGuthrieGhani5 жыл бұрын
that's a great idea, I'll add it to my list!
@stuartfraser57725 жыл бұрын
Hi Lauren. Do you recommend pre-washing the interfacings before using them? Many thanks
@sallydingle3215 жыл бұрын
Spot on as usual Lauren 👌... thanks so much 😁💝😘
@Littlerosycheeksuk5 жыл бұрын
Hi Lauren, great video! I was wondering what weight of interfacing you use for your denim and also what do you use for your pressing cloth. I bought one from Lakeland and it tends to leave a grid mark on my fabric. I've heard people using silk organza. Thank you so much x
@KINGTHEYORKIE3 жыл бұрын
Does linen uses interfacing? I have a simplicity pattern 8137 and I want to make the long on. Yes But I am not sure if I need to add interferencing to linen Great information!!
@LaurenGuthrieGhani3 жыл бұрын
Hello, yes I would say do use interfacing on linen if the pattern generally recommends facing anyway. Just make sure you choose an interfacing that most closely matches the thickness of your fabric :)
@autumncallison55753 жыл бұрын
Very helpful video! You mentioned you used interfacing on I’m your coat. Did you also line your coat? Or did the interfacing act as the liner?
@LaurenGuthrieGhani3 жыл бұрын
Hello, yes I used lining as well :)
@lucykelland90545 жыл бұрын
Hi Lauren. I find that I'm sometimes left with little offcuts of interfacing. Was wondering is it ok to piece together bits or should you just stick with one piece? Thank you.