xiaomi mijia portable digital mini air pump, solve the E8 error problem.如何解决小米米家充气宝E8问题

[@putianren]

Great tutorial. Thank you. But my problem is the battery. So instead of changing the batteries which is near impossible, I just piggy-back two 18650 batteries connected to the original batteries positive & negative terminals.

[@putianren]

Hi Good day. Yesterday I have decided to changed the batteries (2x18650) for about 15 USD. After that, assembled it back. I got fault code > EA0 (the letter A & letter R is the "same" in this digital form) so it can be read as ER0,. I dissemble it again and clean the sensor. Assemble it back, the fault code was different > E8 dissemble it again and clean sensor with a sharp knife by scraping the surface and with fine sand paper & with alcohol. Assemble back, the fault code > back to the earlier code > EA0. So that's it !! I think it will be better to buy new one, LOL. A NEW ONE ONLY COST ABOUT 30 USD ps: if it is the sensor fault, why?? from the beginning the sensor was untouched at all. How did it because faulty on it's own?? Thank you & have a nice day

[@ziyadolunay6856]

Hi, your information is very good. A thousand thanks. It made me happy to watch them. I changed the batteries. But now the batteries are empty. I can't load it. I tried with different cables. I tried different grips. I tried with a different charging cable. What should I do? Can you help me?

[@HSsharma37]

Thanks a lot buddy.... wil try it and update here

[@HSsharma37]

thanks a lot .. mine worked beautifully after cleaning TPMS sensor..

[@andresote444]

Thanks

[@misbakhulfathoni557]

Thank you..

[@Ferrys.kennedy]

In my lcd, "E4". What's my problem and how to solution?

[@lilpew_beast9988]

Mine was not pumping. It was sucking air.

[@putianren]

Mostly like the one-way valve malfunction

[@tehran_adv]

hi,my digital pressure gauge on the device(xiaomi mijia portable) shows about 4 psi less. How can I calibrate the pressure gauge?

[@wawa5271]

I would advise against buying the Xiaomi bicycle air pump. I bought one and after two years of use, it suddenly stopped working without any reason. It was already out of warranty, and they refused to repair it. My friend also had a similar experience, with the pump breaking just two months after purchase. Fortunately, they were still within the warranty period and could get a replacement at the repair center in Mong Kok. However, it is concerning how easily the pump can break after the warranty period expires. I recommend avoiding this product to avoid feeling scammed, as I suspect there may be a programmed obsolescence.

[@technoaddgyan1632]

I have same pump. My pump motor is working but not inflate tyre. Air is not coming out. Solution please

[@yslee2001]

My case was the piston ring which is a rounded rubber ring poped out of the piston, i put the ring back on and it was back to work properly.

[@EmilioCachuan]

in my pump I get error EAA help

[@adriandlobo]

They should've provided a reset button

[@jpjay1584]

I think its corrosion. not what you can reset with a button. need to scrape it off. maybe the airpressure sensor??

[@knoxkronik]

Hello bos. Pls help. How do i know if my pump is charging? There is slow blinking white light when charging but after 24 hours charging still no power. Before battery run out, can use without problem. Only problem now is it's not charging. Pls help tq

[@vascofootballacademy4689]

Where can I get that rubbet ring?

[@joycemunar9717]

good day my mi inflator doesnt go down zero but its working when you take out the nozzle it automatic appear in 19 not zero. hope you can help me

[@dileepreddy995]

Hi Sir, My machine is not pumping the air from the output pipe. I took it to mechanic and he dessembled and checked. Still could not find where the air leakage is happening. Pls help me

[@amithgamer3842]

Same problem

[@sunilkh2630]

Me to same issue

[@yslee2001]

My case was the piston ring which is a rounded rubber ring poped out of the piston, i put the ring back on and it was back to work properly.

[@ryansadega679]

How about fixing ERR/EAA code ? Mine keep showing that code. But sometimes it is off directly after several second while pull out the hose. I hope I can get the answer here. Thanks. And God Bless You All..

[@mariojones7935]

I have error code the same

[@ysondey]

I did that..but another "ERO" on my display Please help

[@lauyongjen]

what ERO?

[@ysondey]

kzbin.info/www/bejne/fpy2gq1vjrtko6c here it is frd..thx in adv🙏

[@lauyongjen]

There should be a leak,Please check the parts you removed。

[@adriandlobo]

Too complicated and many didn't solve the problem

[@SlowMarSlak]

mine is not turn on at all

[@putianren]

Battery problem

[@ronedecastro5933]

My unit has never been opened, I got an error display (EAO/ERO) what do you think is the possible solution?

[@lauyongjen]

there should be a leak, please check a parts you removed.

[@ronedecastro5933]

@@lauyongjen can you do a video tutorial? I really can't find the leak.

[@alexanderkulich2456]

There is a small metal plank in video at 8.50. when I took it out on my device, I've found some water there. Dry and and error gone.

[@aileenrosebernardo7592]

@@lauyongjen Hi , my unit is not charging , i used any type of c harger but still not charging , what is the problem? Thanks

[@agungsaputra2268]

@@alexanderkulich2456 Thank you my ero message is gone, now is normal again, i just clean the part in 08:50 with tissue and problem "ERO" is solved.

[@irfannuddin]

PLEASE MAYBE SOMEONE HERE KNOW WHERE WE CAN BUY SENSOR PRESSURE AT 9:21 ??? BECAUSE MY HAVE IS BROKE...

[@eliasgus4035]

do you found it? i have same problem

[@fty_09]

Hello bro, did you find it? ı must buy it this sensor

[@dr.kunwarvikramsingh3867]

Motor functional but no air output. Plz help

[@techstudiojbl]

Air leak

[@yslee2001]

My case was the piston ring which is a rounded rubber ring poped out of the piston, i put the ring back on and it was back to work properly.

[@philipusputra6680]

I've got E. Please help me 🙏🏻🙏🏻🙏🏻😢

[@joloh6497]

Have no idea what you are trying to do, perhaps some speech will be good rather than just music

[@rkovalenko]

Насос Xiaomi - error E8. Что можно сделать? Кто может отремонтировать?

[@ridestories1627]

I get error as E4.. anyone know how to solve this? Appreciate reply.

[@josealfredobatallanos9594]

yo también, hay alguien que haya encontrado solución?

[@ricardodanielrubio3868]

Hola buenas tardes, en la ciudad de México, dónde puedo encontrar quién me ayude, mi compresor enciende un segundo y se apaga, la luz de carga se enciende en rojo y no enciende!

[@АлександрБоронин-е5ч]

Здравствуйте, у меня также, вопрос пока не решён, но проблема думаю в плате управления.

[@jepoyx619]

didnt work for me still E8.... huhu

[@y_f_a]

Me to.. please help

[@raffydabu6552]

In 9:49 what did you do??

[@lauyongjen]

clean.

[@marrrkyyy1]

omg, i did as demonstrated but nothing happened. Is it mainly the black bit that is covering the metal area??? I cleaned mine off, still E8

[@lauyongjen]

please check the pressure sensor connection..

[@marrrkyyy1]

@@lauyongjen thanks calvin, which is the pressure sensor? i cleaned the black stuff of the metal contact and screwed the 2 silver screws back

[@caandcwarjun]

It is not resolved . Still it is showing E8 error please advise to get the problem resolved

[@LuisMartinez-yy8mt]

Just trow tha shi

[@mickeyobien1077]

Anyone did this and still E8? I followed exactly on video, and cleaned the sensor, and put everything back, and still was E8

[@ЄвгенійШуть]

Same situation

[@vipultravel]

@@ЄвгенійШуть same E8 what to do

[@ЄвгенійШуть]

@@vipultravel I don't know. Maybe buy a new pressure sensor.

[@caandcwarjun]

Still the same it is displaying the same E8 error

[@caandcwarjun]

Please help me I have done as it is mentioned in video