Lazer lamps VW Transporter 4motion grille lights INSTALL. SWAMPER build

[@project-overland]

They are a mint upgrade. Wouldn’t be without ours. They weather well also. Ours are two years old and you’d never know that

[@urbanarkoverland]

Yeah hate when the black starts to chip on products. 👍🏻👍🏻

[@ellon118]

I had lazer lamps on my landy... totally worth every penny, awesome bit of kit. great video

[@urbanarkoverland]

Totally agree. Get what you pay for

[@martynmackinlay457]

I love how you tube has massively increased the amount of adverts per video 😡🤨 that made it extra enjoyable !

[@modevans3569]

Pay for premium then. Get ya hand in ya pocket.

[@Deepthought-42]

@@modevans3569YT are mining you data on what you watch they don’t need any more money from you.

[@Deepthought-42]

@@modevans3569YT are already mining and monetising your personal data based on what you watch so why pay more?

[@Bynxy100]

been looking at lamps for a while and looks like I am sold 👍

[@urbanarkoverland]

These are awesome. Genuinely 👍🏻

[@electrathewonderdog]

Great video. Very useful. Just fitting std's to my t5.1, so hoping the live feeds are similar for a t5.1. I have modified the position lamp wiring so now have yellow/white switchable and main beam I can switch off. I was hoping to find the feeds in the cab fgrom the main fuse box and have a couple switches above. It might be easier to run the feeds in from the light cluster I guess

[@urbanarkoverland]

Hmm ok. Light cluster is a very easy place to find them. Mine come on with vehicle control. You could always just go in and back out. Same amount of wiring really

[@electrathewonderdog]

done it, tvm@@urbanarkoverland

[@Travelvan999]

Wow I need some for the sprinter, and you managed to refit the four motion badge . Nice one

[@urbanarkoverland]

👍🏻

[@lilianadelheidschwarz2528]

Thanks so much for this great instruction! ❤

[@urbanarkoverland]

No probs.

[@mrbrotherman]

Great vid mate, massive improvement, 19:00 mins in safety and all, don't forget you need to wear a seatbelt !!! 🚑🚑🚑

[@urbanarkoverland]

Thanks. And maybe not talk to a go pro 😂👍🏻

[@battletank9493]

Another great video with tutorial...in a word....Blinding 😂

[@urbanarkoverland]

Love that. Thanks pal

[@michaelwalas5948]

What an awesome video bro! You thought of everything.. And I loved the perfectly synchronised before and after drive !! 👌🏼 Proper good bro 😎

[@urbanarkoverland]

Ha ha. Yeah that wasn’t easy ha ha. Thanks dude

[@wilf6434]

Fitted with very few swears words or spares (!), thanks to your video

[@urbanarkoverland]

Good man

[@shanewaller2864]

Another great video, I too have the Lazer lamps on my t6.1 swamper if you think those lights are bright order yourself the Lazer lamps curved roof bar it is insane 😀

[@urbanarkoverland]

Hi mate. Just had a rather strange comment. Did your original lights come in a box similar to mine. Certificate etc? Thanks for your comment and help

[@shanewaller2864]

Hi mate I have no idea, van haven supplied and fitted my lamps when I ordered my swamper from them ,I have some stickers in the glove box ,I possibly have the other items in the owners manual. But I do know that my lights came directly from harlow and not as Trump says China 😀

[@urbanarkoverland]

@@shanewaller2864 ah fair play mate. They are super booosh aren’t they ha 😂

[@tedlings333]

Great video. How did you obtain the correct angle of the lamps prior to fitting them into the grille. Can they be removed from grille if the lamp angle needs to be adjusted. Thank you.

[@urbanarkoverland]

Yes they can be tilted. Trial and error 👍🏻

[@OurVanTales]

They look wicked! 👊🏼

[@urbanarkoverland]

Cheers you

[@n9ddy]

So i fitted the lamps but now i have an error on the dash, any ideas, i have the THQ DRL V3's and its a 2017 Highline, any help much appreciated💡💡

[@urbanarkoverland]

@@n9ddy right. You may need to plug in. I did my lasers first and there was no code. But when I had my lights done at thq. He did say. When you have lasers and headlights sometimes you start to upset the car etc. something needs deleting out.

[@n9ddy]

@@urbanarkoverland Ok, hopefully a simple resolve with an OBD machine, i,ll give it a try, cheers for that🤞

[@urbanarkoverland]

@@n9ddy yes mate. 👍🏻

[@ScottiStudios]

Just added Osram 200 bulbs but defo need some of these for my 6.1. Would be interested to see where you fed the wire through and where you placed your switch? 👍

[@urbanarkoverland]

Didn’t have a switch mate. My switch wire is the main beam. Watch again. I even mention the number. When I flash main beams. The lasers come on

[@ScottiStudios]

@@urbanarkoverland Thanks, saw the part wiring up to #8 for the beams, don't know why but thought you may have installed a switch in the cab as a bypass. Thanks for replying anyway! Subscribed.

[@urbanarkoverland]

@@ScottiStudios thanks dude. Nah. No switch. If an mot installer did take offence to them. I would just pull the fuse. I love them mate. A lot of dough don’t get me wrong. But awesome.

[@lessayers8653]

Hi. Just to let you know that pulling fuses will not satisfy the law on non-compliant lamps. I remember that the Construction and Use Regulations state that (for lights) "if fitted they must work". You pays your money you takes your chance.

[@urbanarkoverland]

No that’s not true. Have 5 lamps on the top of my sprinter. And that went through fine. Never wired up.

[@dieselbushcraft1299]

Very nice and the fit is great. Also have a look at the Transporter HQ V3 headlamps with LEDs, they made a huge difference for mine.

[@urbanarkoverland]

Yeah the headlight units look good huh

[@dieselbushcraft1299]

@@urbanarkoverland I was sceptical about paying the money for the headlamps but the originals are so poor (when not on high beam), I took the plunge and have to say they have genuinely made a huge difference and so far not had anyone flash me as if to say I’m dazzling them.

[@urbanarkoverland]

@@dieselbushcraft1299 I love them. Awesome upgrade.

[@glennkinning1370]

Great video. Answered a lot of questions that I had. Subscribed.

[@urbanarkoverland]

Nice one 👍🏻

[@Azazel518]

Nice straight forward vid.... I have one tip tho..after cleaning the edges of the vertical sections you have left, squeeze a little dab of clear neutral cure silicon at the end of each one... it stops any potential rattling if any..BTW if per chance you have led lights you will need a can bus...also what are the rims and tyres sizes you have on the van?...they look brilliant!

[@urbanarkoverland]

Hi mate. I have a plan for light. Should be good. Wheels are 245/65/17. Those teeth in the grille are solid mate. No rattling.

[@steve61098]

@@urbanarkoverland Great video… 👍 with your wheels being 245 x 65 x 17 how much do these affect the Speedo accuracy?..

[@urbanarkoverland]

@@steve61098 hi mate. Yet to test this. Or not. But I will 👍🏻

[@urbanarkoverland]

@@steve61098 should say. Or mpg 👍🏻

[@steve61098]

@@urbanarkoverland If you go on ‘willtheyfit’ and put in your before wheels (stock?) details, and your new wheel set up , it will work it out….

[@ABloodyEyeFull]

Those lights look darn cool! They also seemed to put out a good amount of light also, I've got a T6 California I love it, i think it's awesome! But it's got old bulb lights which ain't great, thinking maybe headlight or Lazer light upgrade. Not sure if I can afford both, your great at explaining these things though! Keep up the good work 👍

[@urbanarkoverland]

Oooh. Decisions. Hate that original lights are so poor.

[@701Adventures]

So how did you get the 4motion badge back in place, did you have to adapt it or did it just fit after all?

[@urbanarkoverland]

Yes. Little bit of trimming and fits fine.

[@701Adventures]

@@urbanarkoverland thanks for the info. 👍

[@Bugoutvehiclesuk]

Well tidy.

[@urbanarkoverland]

Cheers you

[@colinprice7062]

Hi mate I really enjoy watching all your videos and am wanting to do a van build myself. However what I would really like is a couple of your stickers to put on my sticker wall when my van is built yours hopefully Colin

[@urbanarkoverland]

Hi mate these are available in my Shopify store. Head over to insta. And hit the link tree. Or email for a link etc 👍🏻

[@colinprice7062]

@@urbanarkoverland cool cheers for that

[@stuartboyer6356]

Hi mate nice install, noticed you got the 4motion badge back on was that easy enough? Like you, I still want everyone to know it’s not a wimpy 2WD

[@urbanarkoverland]

Ha ha. Got a take a grinder to the back. Just to remove some plastic. Still clips in 👍🏻

[@jackbarker610]

So the question is, do they make these for the Sprinter? As now I've got the monster LEDS on the roof rack with the main beams.... the dips are awful!

[@urbanarkoverland]

I know there is an integration kit for the 907. (2018 +) not sure about the 906. I hope so as I have one ha

[@avinyljunkie]

Very informative video. Do you have the position lights wired in on live from ignition? Trying to find which number wires I need to connect from back of headlight. Thanks

[@urbanarkoverland]

Number 7 mate. That’s the trigger wire. Then live and ground straight to battery.

[@avinyljunkie]

@@urbanarkoverlandbrilliant thanks.. yours are elites right? Do you use the “positioning light” or drl feature where they are on as soon as ignition is live?

[@urbanarkoverland]

@@avinyljunkie these are elites yes. But full beams only. So these work whenever full beam will. As that’s the trigger. Number 7 is full beam 👍🏻

[@urbanarkoverland]

Number 8! Sorry. Number 8. Just checked phew think it was white with black stripe.

[@avinyljunkie]

Thanks for taking the time, that’s very helpful..

[@cool9146]

I have aircon in my van and cannot find any information about removing the aircon cover before cutting the grill. Can you help?

[@urbanarkoverland]

I have air con and don’t know what you mean???

[@cool9146]

@@urbanarkoverland the installation instructions are different for non and A/C. They say you have to take the bumper off to get access to the A/C cover that should be removed. Yours looked great .

[@urbanarkoverland]

@@cool9146 I have a/c. I didn’t do that. Or see that in instructions??? You have t6?

[@cool9146]

@@urbanarkoverland 6.1, that’s probably why. I just cut it out when I did the back frame. Worried about doing the wiring but you explained it in basic terms. Crack on with the wiring now with confidence. Thanks. Great channel by the way

[@hielke2166]

Good video, i have bought them aswell for my T5.1! how far are your cables from the radiator? at mine they are touching straight after the hard connector....

[@urbanarkoverland]

Yes they are pretty close. Don’t think touching though.

[@K7aus2000]

Massive improvement over poor VW lights but how often do you drive with high beam on?? Surely your better off improving the dipped beam so can be used every night rather than green lane blasting.

[@urbanarkoverland]

Yes mate you are right. That upgrade may be in the way. 👍🏻

[@K7aus2000]

@@urbanarkoverland I considered the lazers but ended up spending a little more on T6.1 led lights from well known UK transporter specialist. Miles better than standard but not as epic as the lazers. Great video btw. And nice looking 4motion.

[@urbanarkoverland]

@@K7aus2000 ah mate. That’s a great upgrade. I know what you are talking about. I’m looking to change DRL bulbs. But no headlight is gonna HIT like these. They are Boosh ha ha

[@scopex2749]

600 nicker for 2 lights and some plastic? Now THAT is a rip off. Seeing as you have to do all the installation, Lazer probs produces those kits for around £100 tops for that lot! I certainly cant justify that amount on just LIGHTS when I have a whole camper build to fit out. VERY good video though👍

[@urbanarkoverland]

Not for you then ha.

[@peterhook8033]

Does your van have air con ? - I read on Transporter HQ that if you have air con you need to remove the bumper on a T6.1 - seems a bit strange ?

[@urbanarkoverland]

It does have aircon. But not a 6.1. If that helps.

[@peterhook8033]

@@urbanarkoverland Aah ok - maybe there is a difference then - thanks

[@urbanarkoverland]

@@peterhook8033 👍🏻

[@dunndag]

Great video.. But £600??.. I was thinking around £150 max before I clicked the link..

[@urbanarkoverland]

Nooooo. Any decent light will be more than that. Big difference between these and an eBay special.

[@camperfam]

@urbanarkoverland - would you recommend/suggest these if you have OEM LED's already? We've got a T6 California Ocean, but the idea of more light....just....*insert Jeremy Clarkson MOAR POWAR GIF*

[@urbanarkoverland]

Yes mate. I would. These are epic. Nothing out of factory will do what these do. 👍🏻

[@camperfam]

@@urbanarkoverland Great, thanks. Might be the next mod! Found you after seeing you on @ChrisSloanes videos. Consider us a subscriber! Great content.

[@urbanarkoverland]

@@camperfam top gear video? That’s a corker. Thanks and hope to see you around in the comments 👍🏻👍🏻

[@camperfam]

@@urbanarkoverland I cant help but think you needed a VW California in tow with two smart-alleck children to compliment the airwaves. Give those two a walkietalkie and you guys wouldn't have gotten a word in edgeways. :D

[@urbanarkoverland]

@@camperfam prob easier to understand than a Geordie and a Scotsman

[@vandox21]

Great vid , might have too invest 🤘🏻

[@urbanarkoverland]

Ah man. You won’t regret

[@steve61098]

Would these fit a VW T6 badgeless grill?….

[@urbanarkoverland]

I doubt it. The mounting kit is shaped around the round grill. Maybe contact laser lamps. Because if you had two fitment kits it would. You want two furthest lefts. And two furthest rights. And use them that way.

[@steve61098]

@@urbanarkoverland Thanks 👍

[@amacmedia3221]

Great looking lights. Did you cut the switch and wire off the loom when wiring directly to your full beams? Also the other lights you mentioned, are they just DRL only, or DRL and full beams?

[@urbanarkoverland]

Hey. I removed the plug. Spliced into it. Then refitted. They do both versions. These are full beams. But they do a drl 👍🏻

[@amacmedia3221]

@@urbanarkoverland thanks very much

[@517piper]

Great Video - Do you think I can make these work on my T4 Eurovan? Many Thx, Cheers'

[@urbanarkoverland]

If you try hard enough ha ha. I genuinely don’t know mate.

[@Chriswoodworker]

Dont know why you are tutting all the time, you did a great job mate.

[@urbanarkoverland]

Tutting?

[@Chriswoodworker]

@@urbanarkoverland smacking you lips as if you have done something wrong. I thought it went perfectly.

[@urbanarkoverland]

@@Chriswoodworker not sure if you are being sarcastic. But all I can say is. That’s the way I obviously talk. Probably doesn’t help I’m wearing a microphone. Mouth can get a big dry talking and talking.

[@Chriswoodworker]

@@urbanarkoverland Not being sarcastic. Just thought you were frustrated in parts and tutting at yourself lol.

[@urbanarkoverland]

@@Chriswoodworker ha ha. Think that’s me starting a new sentence. Mic super sensitive.

[@mcjjordan]

Do they do a t5.1 kit?

[@urbanarkoverland]

Reach out to vw t5 t6 upgrades 👍🏻

[@Homesteader40]

Do they have these California 6.1. 4motion

[@urbanarkoverland]

Yep. Call vwt5 upgrades.

[@amcenteggart]

Mint job thanks for the vid, did you use the on/off switch supplied in the kit?

[@urbanarkoverland]

No mate. Used headlight as switch. Tapped that wire into main beam

[@amcenteggart]

@@urbanarkoverland cheers just contemplating having it in the circuit but not a show stopper - cheers for reply

[@urbanarkoverland]

@@amcenteggart it’s easier to rig to a specific light than it is to take a wire through the bulkhead and trace it to location.

[@amcenteggart]

@@urbanarkoverland sure yes will take that signal off the back of the headlight just like you did, was just thinking of leaving the switch in the circuit so I can switch lazers off for times when I just want normal main beam (I’m asking myself why at this point…… but you get the drift?)

[@urbanarkoverland]

@@amcenteggart they passed mot at vw so I don’t see why you would.

[@Normanskie]

Really nice, but the price is a bit hefty though.

[@urbanarkoverland]

Good led’s are mate

[@adiehull]

Looks sweet that! 👍🏻 any plans for a light bar also?

[@urbanarkoverland]

Hi mate. Yeah….. although I have plans for the roof….. which I need to do first to know what I’m left with 👍🏻

[@adiehull]

@@urbanarkoverland look forward to it. Impressed with the look of the Lazer lamps

[@forbiddenracer2056]

I’d love a set but just too pricey for me to consider. 😢

[@urbanarkoverland]

I get that mate. If you did fork out you wouldn’t regret it.

[@jonnyatack6669]

This a manual?

[@urbanarkoverland]

Yes mate. 6 speed

[@focusmicro]

Is that a T6 you have?

[@urbanarkoverland]

Ye

[@focusmicro]

@UrbanArkOverland thanks for replying. Did you upgrade to full led headlights yet or just leds bulbs?

[@urbanarkoverland]

@@focusmicro just the bulbs at mo. 👍🏻

[@focusmicro]

@@urbanarkoverland Did the 4motio0n badge slot starigh back in to orignal place after installing the drivers side lamp? Sorry for the questions! D:

[@urbanarkoverland]

@@focusmicro no mate. Have to shave a bit off the back of it. But does go back in 👍🏻

[@MickSnr]

Stunning mate, this builds going to be right up there. Now where’s that Un-Subscribe button 🤣. Stop it 💰💰💰💰

[@urbanarkoverland]

Don’t you dare ha ha ha

[@yellowbellytravels7943]

All that fancy boxing and documentation must have been given to you as it’s a sponsored video. I recently ordered £600 worth of lights from Lazer and the packaging looked like it was straight from China (cheap & Nasty) with no instructions or certificates. There not all they make out to be especially the stupid prices they charge.

[@urbanarkoverland]

I reckon that was a fake mate???

[@yellowbellytravels7943]

@@urbanarkoverland ordered Direct from lazer lamp website mate

[@urbanarkoverland]

@@yellowbellytravels7943 that’s a toughy. They wouldn’t have made me my own box etc. did you buy lights and integration kit. The branding was awesome. Clear from the box it was for my vehicle. Sent next day so wasn’t like I had pref treatment.

[@yellowbellytravels7943]

@@urbanarkoverland no mate not integration kit it was Triple R I wasn’t impressed, I do need another 6 lights but won’t be going with lazer.

[@urbanarkoverland]

@@yellowbellytravels7943 ah that’s bad to hear. What vehicle you putting them in. And without the kit how did you mount. The lights regardless of packaging are sick. That can’t be argued with surely.

[@cedarcanoe]

not very theft-proof apparently

[@urbanarkoverland]

@@cedarcanoe oh really. I suppose not much is if they really want it

[@jellyd4889]

Pointless lamps. Maybe useful for going to the end-of-garden bogs in the night.

[@urbanarkoverland]

Pointless. Are you kidding. The full beams are shocking on the transporter. If on an unlit road. Especially a country road. These would be perfect.

[@TimH601]

Great video love it that someone is making on SWAMPER T6 videos 😀 I also fitted Lazer Lamps to my T6 much better than the candle bulbs 😂 and plus I’ve wired the little led’s that built in the lamps to my side lights…..more show off when unlocking and driving. Also flashing your mates when sat behide them and they pull in thinking your a police man 🚓👮‍♂️😂 Also what’s your Instagram?

[@urbanarkoverland]

Oooh. That’s a cool idea ha. Insta same name matey thanks for following. 👍🏻