Leaflet Printing by Hamada 600 Mini Offset Printing Machine in New Market

[@CustomPrinting]

overprintcomilla.blogspot.com

[@nancywachira6770]

how much new

[@জিয়াউলফারদিনমিশু]

ঠিকানা কোথায় ভাইয়া ?

[@ssnoc]

Nice work👍

[@마산아재-f5v]

지금 인쇄소 운영하고 있어요~ 25년전에 한국에서 그렇게 인쇄했습니다. 참 감회가 새롭고 손에 잉크 묻어가면서 일하던 추억들이 새록새록 도네요. 항상 수고하십니다! 젊음이 부럽습니다~

[@vighnesh.acharya]

There is so many talented printers who ready to take printing as challenge. Actually a single color machine not a time sensitive for 4 color print. But this man doing with single color machine. Hat's off

[@fernandojvalencia8151]

I remember doing this on a chief 17 back in the 70s . It's not hard at all. Printers in India are not as quality conscious as American printing.

[@fernandovalencia3542]

I also ran a chief- 15 and 17 with a T - head... I ran process on it for the K- Tel music 8 track tape labels. It was so easy let these guys try a 6 color with a coater! 😂😂😂

[@iankearns774]

@@fernandovalencia3542 They called them Gestetners here in Australia, we ran a lot of envelopes on them. I had never heard of a Chief so looked it up but the Gestetner 211 and 213 I remember well. Problem out here, a lot of places made you run silvermaster plates which were no good for any registration work.

[@zunaidkajee4540]

brought back memories. when I started my business 35yrs ago, I started with a Hamada star 700CDN. Today I have a full heidelberg shop, including a 4 colour MO. Love the smell of ink....

[@MrMisanthrope1RBjr]

i used to work on the big 6 COLOR litho presses at james river corporation, SHEET FED litho presses , web fed roto gravre pressses, Zerand, and Bobst ChaMPLAIN.

[@alanweber675]

I was a junior pressman back in the early 90s and they'd put me on the Hamada. I'd come in and see my helper with a big grin and just know... clack clack clack

[@fernandovalencia3542]

So you have the oversized GTO!

[@colinferrell4954]

So impressed with your professionalism and knowledge of your machine....

[@6r4metroman]

I ran a Hamada Star 45 years ago, it didn't have claps then just pin bars, so you had to stop and alter the registration during the run as the printing plate would settle in. The first colour job I printed was a 4 page A4 leaflet for a Tunisian holiday company, I'd never even heard of the country. Those were the days 🙂

[@iankearns774]

Yep you had to run the plate in a bit with setter sheets and stop. Give the grip edge a bit of a tap then tighten the back edge a little and recheck your position Another trick was ink your plate cylinder up before putting the plate on. It didn't pull off the pins as much as when you didn't.

[@nunobarbosa2456]

I work in a 2021 Heidelberg XL 75 6+L Offset UV and see This machine make my day 🤣

[@eliogotti15]

Well well I haven't seen a printing press in a long time grew up in the printing business as a young child smelling that ink and watching this man put the plate on the printing press reminds me of my youth damn I didn't know that they still did that and where they do that at and that's crazy much love to the printing business Pacific Southwest printing Northridge City stand up that's where I learned how to become a printer and a lot of other things too I love that keep it going

[@unitech_digital]

you write amazing

[@jahangirsiddique9522]

ভাই প্রিন্টিং বিষয়ে ভিডিও করার জন্য ধন্যবাদ। আমি দীর্ঘ ৩৯ বছর এই লাইনে আছি, তাই ভিডিও ভালো লাগলো। আমার ধারণা মেশিনম্যান সাহেব এর কারণে ভিডিও প্রাণবন্ত হয়ে উঠেনি। আরও সুন্দর সুন্দর ভিডিও, বিশেষ করে অত্যাধুনিক বায়োকালার-মাল্টিকালার প্রিন্টিং প্রেস থেকে ভিডিও আশাকরি। আবারও ধন্যবাদ।

[@harishasan2042]

ভাই এই কাজ শিখ‌তে কত দিন লাগ‌বে?

[@pavelsagor841]

ভাই আপনার সাথে যোগাযোগ করতে চাই। নাম্বার অথবা ফেসবুক আইডি দেন। বই প্রিন্ট করাতে চাই এই ব্যাপারে তথ্য লাগবে।

[@moisesrobiou]

En este modelo de prensa aprendí a ser impresor, excelente maquina HAMADA 700, igual a la multilight 1250w y la 1650 multigraf, las dos mejores maquinas con excelente sistema de registro de color.

[@manuelillescas9387]

Yo tenia 17 años cuando aprendi a operar la multilit

[@heraldofalcao3059]

Aqui no Brasil trabalhei de 2002 a 2015 com Rotativas

[@antoniososa6676]

La verdad no me gusta la hamada, prefiero la Multilith 1250. ¿ Porque? Porque es mucho rollo tan solo para poner la lámina.

[@rubennaicker576]

Bhai good to see you can print out of Hamada of that quality hats off

[@sahadathussain5107]

Quality is so nice.. great printing skill. One will say that it is printed in four colour million dollar machine👍

[@toniyoussef4362]

Nice machine ,God bless you ! New York.

[@CustomPrinting]

Thanks you so much ❤️❤️❤️

[@normanazeez1816]

The press seems to be in good shape, registration and good inking and dampening rollers, but it's customarily that before the actual printing of the job, that waste paper is used to run up the color which will result in proper ink and water balance. The ink dwell can be regulated by notches on the dwell. Turning the dwell by hand will definitely result in up and down coloration.

[@CustomPrinting]

Thanks ❤️❤️❤️

[@paulcarroll4003]

are you living in cookoo land ijust saw two pigs fly by,full of your bollocks@@CustomPrinting

[@normanazeez1816]

@@paulcarroll4003 Yes two pigs did fly by. They came from your house.

[@paulcarroll4003]

never read such bollocks,can you spell the make of a german printing company who happen to be the best in the world for some reason?

[@paulcarroll4003]

more than yo@@normanazeez1816

[@sskywisp191]

wow...hamada doing full color.....impressive!

[@fernandovalencia3542]

Run it faster! It does go faster you know? Slow production is a money loser. Crank it up rookie!!

[@nguyenloc14]

Wow, such a cute machine but seems effective :D

[@MrBijandeb]

LIKE UR WORKSMANSHIP......NICE

[@iankearns774]

Respect to this bloke, Hamada 600 with a push sidelay is not made to do 4 colour process. I did a lot of this stuff on GTOS and Praktikas back in the 1990's as they had snap drag sidelays but we used these Hamada presses for simple spot colour or relatively tight two colour work. I suppose if you have no other choice you find a way.

[@cristhianbustillos531]

Hasta su taller y su metodo de trabajo son mas limpios que el lugar donde venden o hacen su comida 😅😅😅

[@jerryeinstandig7996]

nice work. ask your boss for a 3302. you should have the ink keys and sweep adjusted so you don't need to spin the fountain roller by hand....ever. the press can run alot faster, you know ? resetting ink keys during a run is a sign of operator error and inexperience or that a pressure adjustment is needed between ink ductor and the fountain roller.

[@josenunes3408]

Parabéns meus companheiros da tinta

[@riteshkakkar7112]

Passbook

[@sergiolourencobgd4623]

Artista gráfico. Parabéns 👏👏👏

[@josenunes3408]

Olha o José Nunes aqui curtindo bastante o cheirinho da nossa tinta, só que a minha tinta é vinílica também, grande abraço para todos os gráficos

[@VICTORYCOPYCENTRE]

Tutorial is very useful for many people 👍

[@geoffreycowl]

Terrible conditions, but still getting the job done.

[@venkatramanj8978]

Talented work 👌👍

[@БобрикЗебрик]

Привет печатникам Индии из России)))

[@kdw75]

I ran one of those for many years at my families print shop. We only use it for envelopes now.

[@wilarguello1598]

La imprenta, Mi oficio Qué lindo!!!

[@shabbirjutt2323]

Buhat acha sar ge 🇵🇰🇵🇰🇵🇰👍👍👍

[@raulmindragon8303]

Tiene buen rejistro la máquina y sobre todo los rodillos de la máquina tienen mucho q ver para q saque un buen trabajo , claro el prensista tiene mucho que ver según su experiencia

[@richardfowler5163]

Class. But why is he continually turning the ink duct wheel by hand?

[@srinivasrao5231]

Superb Printing Bro...

[@mdabunasarfaizurrahman5440]

Please describe in commentary of all the process, that will be more helpful for new entrepreneur like me. Description like: how to make plate, how to adjust paper position, what chemical is used for cleaning drum, the service quality of the machine, available used machines in Bangladesh etc. Thanks for the video.

[@CustomPrinting]

Ok vaiya

[@mohammadsohail1344]

nice one expert .. very good ..

[@porimitakuri2731]

Sir, I have Offset printing mechain four color, but not working can u watch

[@unitech_digital]

excellent videos

[@sumarali6603]

Thanks 👍👍👍 for you all about this wonderful print and also I am asking you from which shops you all taken this wonderful Inkis of this machine for printing on 4 Colours if you have sending or Address to buy this item of Ink in best style Thanks 🙏🙏🙏 you all about the good information you can you send Thanks you all again

[@첫페이지맹수]

와 저렇게 해서 언제 다 하지??? 2절 4색기 국전 4색 옵셋 기기 가지고 있으면 신세계이겠다요

[@amitarts2316]

Well done operator

[@heraldofalcao3059]

Trabalhei 13 anos em uma Grande Gráfica a Quebecor Word 1 ano no acabamento e 12 anos na Impressão com Rotativas M850 e M1000, duplex com RGS e CCS

[@Marquês-w9k]

Vendi HAMADA, RIOBY, CHEEF, MULTILITH, SOLNA, DOMINANT, RICOH, CATU, GTO, SORM, SPEED MASTER, ETC, ETC, Pensei que a impressão off Set já tinha acabado, mas ainda tem gráfica em atividade??

[@lucasmandato4910]

to pensando se compro uma kkkk bagulho tem um ppm absurdo em boa resolução...topzera os offset da vida...só o setup que é "complicado"

[@lucasmandato4910]

problema q só mexi com ploter jato de tinta pra lona e impressora a lazer de gráfica rápida...não tenho muita ideia de como operar um trambolho desses

[@kataragraphics]

Nice work single head but job multi colour

[@mcoram3486]

I ran one of those in the 90's with a T-head. 2 color

[@rabins1A]

wow great machine and technician

[@kruttibasmuduli7832]

Good work bhai👍

[@yathirajasivaramprasad9978]

Super good work experience

[@raulmindragon8303]

Para sacar una selección de color blak, magenta , cian y yello la máquina tiene q estar en buenas condiciones y el prensista...

[@raulmindragon8303]

Yo tengo 20 años de prensista manejando Heydelberg solna komory Roland, por lo regular máquinas de 4 colores en adelante , también e trabajado máquinas de un color como Kors , kora Heydelberg m-o y GTO

[@henrycabrera9260]

Yo fui prensista por 15 años y perdone no sé si yo estoy mál o ud pero en una máquina mono color se empieza por negro ,cyan ,magenta y quien le da el realce a la impresión es el amarillo yo he manejado GTO 52 bicolor solna, Roland

[@raulmindragon8303]

@@henrycabrera9260 Bueno la secuencia de una de 4 colores es , Blak, cian , magenta y yello

[@ashokgehlot4393]

excellent.... good job

[@VipulGamer2008]

U have not shown cyan & magenta printing live video

[@christianjayfortuno2150]

Exactly what i look like when dealing with a paper jam 😅

[@kevingordon9192]

Those Hamada’s are like Multilith 1250 with some variations.

[@MiguelRodriguez-ef8dh]

If he is printing on gloss paper, it would offset on the back side, if he is not using power.

[@madebyasia2022]

Excellent printing machine

[@rahulagrawal3272]

So you can print bags in this machine

[@tejudabla6553]

Apki factory kaha par hai sir. Mera ragular kam nikalta hai

[@neelamagra]

Good coverage

[@aryangupta9329]

Bhai mere pass 100-120 dibee ink(sihayi) ke rakhe hai aur kuch chemicals bhi hai hum Kanpur me rahte hai agar leni ho tou batao

[@Hardikdeshmukh99]

Is par master bhi lg jata he kya

[@girliecatalan6623]

Im planning to enter in offset printing business but when I watch the process I think its too tiring

[@abuturabmakandar4306]

I need a multicolour mini offset matchin

[@IyyappanMohan-j8o]

This is bag sheet or poster

[@programmingmindset]

poster

[@reyankhan.1708]

Where are you from

[@jivanlimbu4448]

Is this available in Nepal sir?

[@PrabaAPraba]

GOD BLESS YOU

[@cristocristiani2240]

😀😀 kzbin.info/www/bejne/iXaadXefds99mtE

[@GuhGRAF]

Excelente 👏🏾👏🏾

[@geckosound]

Leaflet printing by Hamada mini Offset

[@Format_Dz]

تلك الآلة تطبع النقود أم لا ؟

[@skyblue-tg4qu]

No need of commentary....all Know about offset. 👍

[@kishankumar-lc5wj]

WHAT IS THE PRICE OF THIS MACHINE

[@hedayatkhan999]

New Market kolkata me yeh press hai kya

[@nandhu3years]

Plate CTP or exposed

[@CustomPrinting]

CTP

[@jamesperezp]

ESA ES LA MEJOR MAQUINA

[@mdmuntasir3107]

Ye hamada me kon sa modal hai Bhai

[@kishorekumarchitturi]

super bro

[@mauriceramos1987]

Esta muy mal que en el camino se regule el tintero no sale todas a un mismo color 🤨🤨😔😔ni modo es la costumbre pero con una calidad yo no le aceptó ese trabajo.

[@rons9197]

What’s Hamada Now?

[@aminurrahmanantim8503]

স্কুলের ভর্তি রেজিস্টার রেডিমেড কিনতে পাওয়া যায় কোথায়?

[@arvindersingh9117]

Roller pressure is very high on plate slender. But still it's good keep it up!

[@jonggringsaloka8452]

Hamada😄😄✌✌

[@sanjay_dhage.]

मैं भी यही काम करता हु, मल्टी कलर, कीर्ती प्रिंटिंग प्रेस, वाशीम

[@mehmetsahin8149]

Dear master, the paint setting is done without the actual printing, otherwise the work will be colorful.

[@toxicgaming5808]

its very hard to print multi colour

[@bodean2000]

Not hard at all just time consuming without a T head which I never liked to use.

[@biyerchithi84]

Plate ki ctp na manual

[@CustomPrinting]

CTP

[@biyerchithi84]

Ctp plate koto korey per plate

[@yravindra1711]

Superr 4 colour Print On single colour machine

[@khokanmanna5475]

Eta te ki 4 color 4 bar print korte hobe, tar full process r ekta video din

[@ryananthony4840]

Yeah, definitely should not be touching the ink controls anymore once the job is running

[@nunobarbosa2456]

Its a Running setup xD

[@sanjaypatel7363]

Is me ink konsi use hoti he

[@pkstudio751]

Bhai Price kya h New machine ka

[@garysouza2240]

Also the fact that your turning on the ink and oppression a few passes before the paper even hits the plate. That will cause the ink to go all over the bottom cylinder cuasing it to go on the wrong side of the paper😂

[@mdmuntasir3107]

Ye konsa modal hai

[@Michel-tf9pv]

Al no pasar una prueba con hartos malos al principio si lo hizo asi con el magenta y cyan dificil que haya quedado la imprension pareja

[@sillypiggy2]

the sheet at 11:58 was missing magenta

[@liveplaygamecrazy8815]

যে প্লেট দিয়ে ছাপাতেছে এই প্লেট কিভাবে তৈরী হয়।তার একটা ভিডিও চাই।

[@indirav.mathpati4299]

Print area or dimension of machine?

[@kaushikgoswamy4080]

কারিগরের ভাব আম্বানি আম্বানি: যেনো প্লেন চালাচ্ছে: আমি জেরক্স অফসেট ১০ বছর কাজ করেছি: পলি মাস্টার প্লেটে ৪ কালার ৫ কালার প্রিন্টিং করেছি; অত ভাব দেখানোর কি আছে:

[@ryananthony4840]

Looks good though!

[@STUDIODHARA]

Nice

[@syedisrarhussain8684]

Mashalla

[@SDesign-qt5gx]

Location

[@ibrahimshaikh7836]

Super printer

[@muthiyahlakshmanan4038]

Rate how much

[@mdsheikhakramhosin439]

ভাই এটা আদিম কালের মেশিন, এখন এইসব মেশিন আছে, আমিও Printing Prss কাজ করি, Abu dhabi আমি নিজেও Printer, G T O মেশিন 52 মেশিন, 2 Color, Lamating Spot Uv, Binding এর কাজ, আলহামদুলিল্লাহ সব কাজ করি, কিন্ত এত পুরানা মেশিনে কেমনে কাজ করেন, আপনারা, একটা নতুন মেশিন কিন্তে পারেন না মিয়া, আদিম জুগের মেশিন, এত টাকা ইনকাম করেন, একটা নতুন মেশিন কিন্তে পারেন না, এই কেমন কথা, এই জন্য আমাদের দেশে এখনো পিচিয়ে আছে, কেউ কি পুরানা মেশিন দিয়ে কাজ করে নাকি, দুর মিয়া, 😡