Learn BEGINNER WOODWORKING making these sawhorses

I've been wanting to make these for years and I wish I hadn't waited so long. These are a great build and when you're done you have a piece of shop furniture that is both functional and looks awesome! The joinery on this piece will either challenge you or help you brush up on your skills. And did I mention they look awesome?
I've made the cut lists available on my website here:
www.coffeycustombuilds.com/sh...
But my paid tier patrons get it free:
/ coffeycustombuilds
Affiliate Links (These help support my channel):
3M Cubitron Sandpaper 775L (my preferred sandpaper): lddy.no/1i4wg
Glue Roller: amzn.to/404WOXs
Starrett Tape Measure: amzn.to/3Rt6SqQ
Festool Kapex: amzn.to/3sWE7Jz
Pantorouter: www.pantorouter.com (Use code COFFEY for 10% off)
Shaper Origin: www.shapertools.com/coffey
Festool Domino DF 500: amzn.to/3GpLwUJ
No. 5 Dominos: lddy.no/1iq3i
Double Sided Tape: lddy.no/1iq3j
Bits & Bits 1/2" Compression Flush Trim: bit.ly/4a2mbOg
Stanley No. 4 Smoothing Plane: amzn.to/3uCJeyR
Festool TS60 Track Saw: amzn.to/3R8DpRg
Festool ETS-EC 150/5: amzn.to/416qkwx
MircoJig Push Stick: bit.ly/47GP2pO
TItebond II Open Extend Time: bit.ly/3t6efuD
Lumber Crayon: amzn.to/3RpFGci
CMT Orange Flat Top Ripping Blade: lddy.no/1iq3h
Totalboat: bit.ly/3IEHrOr
Starbond: bit.ly/3ITPpUy
MircroJig: bit.ly/3XecHbP
Magswitch: bit.ly/3H6uhJl
Bits & Bits: bitsbits.com/ref/6233/
Rustic Lumber Finish: bit.ly/3mZWDxF
Bidwell Wood & Iron: bit.ly/40geRJL (Use code COFFEY10)
Jobber: bit.ly/3iPzZps
Grabo: order.grabo.com/u/Coffey
Coffey Grinds: bit.ly/3GKL6rR
#woodworking #workshop #shopfurniture
00:00 Introduction
00:35 Breakdown
03:25 Mark up and joinery
05:08 Tenons
10:59 Foot reveals
12:19 Draw bore
14:31 Wedged tenons

[@slownsteady100]

Mortise and tenon go together like peas and carrots, or, um, never mind. I enjoy your editing and narration. Cheers.

[@CoffeyCustomBuilds]

Haha!

[@WoodshopOutBack]

Nice job. Love the video and love the design of the sawhorse.

[@CoffeyCustomBuilds]

Thanks dude!

[@jeffforbes3772]

Cool project...good tutorial. Thanks for posting.

[@CoffeyCustomBuilds]

Thanks for watching!

[@scottreynoldsbuilder]

Beautiful saw horses! I really appreciate the knowledge that you share.

[@CoffeyCustomBuilds]

Thanks man! Appreciate you!

[@stefannahuijsen1307]

Great job!! Much better than the metal once

[@CoffeyCustomBuilds]

Makes the shop so much more warm!

[@andrewbrown8148]

Very nice~! I picked up a pair of plastic horses a while back at Harbor Freight, but I'll be replacing them with a pair of these. Love the video~!

[@CoffeyCustomBuilds]

You'll love making these

[@JimEichenberg]

Great build and great video...BUT...You did not mention Krenov once. That guy could have used a shout out.

[@CoffeyCustomBuilds]

I had a long monologue about Krenov and the origins of these in Japan actually but it was going way into the weeds and I thought that it might be off putting for people just want to get it to a beginner woodworking project. He definitely is the god father of modern woodworking.

[@henryworkswoodandmetal]

Great project! Well done……

[@CoffeyCustomBuilds]

Thanks for watching!

[@MAKEITSF]

Plugs have short grain, while dowels have long grain strength. Dowels have more strength for a draw bore situation, and they wouldn’t snap.

[@CoffeyCustomBuilds]

Yup

[@kevinb6102]

Ironically watching this while I’m taking a dump.

[@CoffeyCustomBuilds]

I'm replying while doing the same!

[@diyhuntress]

I'm so happy you didn't 💩 your pants in this video.

[@CoffeyCustomBuilds]

Not on camera

[@deisead1]

This is great, thank you! As someone who has a band saw instead of a table saw, how would you go about doing the tenons? With a sled, or just by hand/eye?

[@CoffeyCustomBuilds]

I use magnetic stops. I remove the bulk of the material and clean up with chiseld and planes.

[@IBIScnc]

Love the video, here is my unsolicited feedback (you said you like it on Self Made). When you are talking to the camera, the depth of field seems too shallow, it looks odd, like you are on a green screen. I like the more casual nature of the voice over, you seem so jovial on the podcast, and that came through more in this video. Saying "why" you wanted the sawhorses made out of wood instead of metal would help add to the story. Keep up the good work, it is no small task doing all the camera work yourself, and you did a great job.

[@CoffeyCustomBuilds]

Thanks for the feedback

[@FrazerCanyonWoodworks]

You’ve made a strong case for shop diapers.

[@CoffeyCustomBuilds]

Go check my store

[@MaxMut.]

For the shop or the museum “

[@CoffeyCustomBuilds]

It's covered in wood right now!

[@kenfloyd430]

Can I please ask what type of plug cutter bit you are using?

[@CoffeyCustomBuilds]

You bet. The set I have is currently out of stock but here's an equitable set: amzn.to/4coE4Y4

[@kenfloyd430]

@@CoffeyCustomBuilds thanks very much! Great video as always.

[@CoffeyCustomBuilds]

@kenfloyd430 appreciate that man

[@Mastercraftspirit]

Nobody got time to poop their pants

[@CoffeyCustomBuilds]

I got stuff to build!

[@RDSWOODWORKING]

It's easier to do all the mortise and the tenons with a pantorouter just sayin 😂

[@CoffeyCustomBuilds]

Oh so much easier lol I made another set this weekend in like an hour.

[@BadAppleWoodwerx]

Not gonna lie, that round over bit on the tenons felt kinda sketchy. Think I’ll stick with just chiseling that off. 😉

[@CoffeyCustomBuilds]

Yeah man get it done however you feel the most safe but roundover bit are made to round over wood and it's perfectly safe.

[@RyanWattersRyanWatters]

I’ve had enough of this! I’ll be that guy who raises an angry, obnoxious technicality. Pooping your pants is better in shorts. Gravity takes care of the majority of the removal. You’re welcome, America.

[@CoffeyCustomBuilds]

You sir, are so brave. And I for one applaud you.

[@RyanWattersRyanWatters]

@@CoffeyCustomBuilds The pay isn’t great, but I’m doing important work. (I mean, I gotta add *some* variety to my standard your-work-and-shop-are-so-rad comments that I put on literally every video of yours that I watch.)

[@BLDbuilds]

Pinch.

[@CoffeyCustomBuilds]

Pinch it off

[@nickyt3269]

pooping your pants in shorts is the worst. glad you decided not to do that

[@CoffeyCustomBuilds]

I cgi'd it out of the video.