Learn GhostCode into Keypad from Remote

How to Learn GhostCode into a Ghost Controls AXWK Premium Wireless Keypad from a Remote Transmitter

[@flamitaz]

I purchased a Ghost control keypad from Amazon (where i originally purchased my Ghost control gate opener package), the instructions that came with the control ARE NOWHERE NEAR complete with this step. Thank you so much for making this video! I'm heading over to axon right now and will point people in the direction of this video and also write in there the CORRECT method for this step as you have showed us. In the instructions, they skipped steps 3,4,5. I was getting frustrated thinking i had done something wrong! Thank you for making it super easy and painless! 👍

[@Ghostcontrols2015]

We're so happy to hear this video helped!

[@Lakingitup]

Thank you. We were not comprehending that touch the remote part. Thank you for the video!

[@coreyh55]

This was super helpful. I had accidentally programmed a new remote and couldn’t figure out how to reprogram my keypad. 😅

[@Ghostcontrols2015]

We are so glad the video helped.

[@keta6atl]

What I found was that I had to program my keypad FROM a working remote. Not just any remote, but the remote with the learn and party buttons on it. Step 2 in the "keypad directions" was a must for me to follow before my keypad started to work. In the "keypad directions" it is NOT mentioned that you must do step 2 for the keypad to work.

[@laverdadesmejor]

I purchased a dual gate opened and am satisfied except for one thing and that is the range of the remote controllers; it's terrible! Prior to making my purchase, I was told that the unimpeded range of the remotes would be 1000 feet. Even with the "upgraded antenna", I can't get it to function at 200 feet and no one can tell me why????

[@JoeyAlonzo-rx7ig]

How to do a factory reset on a ghost control keypad green button?

[@jeanettelloyd8898]

Remove one battery for 15 seconds then replace it. There’s a video

[@jamesbrubaker8395]

I have the 10 page manual (plus addendum) from the box in front of me, and nowhere is a "58" code mentioned. The manual has a copyright 2020 and the Addendum has a 2021 date. Yet 6 months ago you state that its still the correct procedure. I still cannot get the keypad to operate my gate.

[@Ghostcontrols2015]

It sounds like you have our V3 keypad. If that is the case, this video is not applicable to your product. You can identify which model you have by Removing one of the C batteries. Wait 10 seconds. Reinsert battery. If it beeps 2 times, it is a V2 keypad. If it initially beeps 3 times, it is a V3 keypad. If you have the V3 keypad, please give us a call at bit.ly/2Qp7Uag for further instructions.

[@bluesmanreturns]

thanks for video can you slow it down some i had to play it ten times just figure out what your saying, question is there a way clear the codes and start over thanks

[@RickLacombe]

Hi there. In order to reset the keypad remove the batteries, wait a few seconds, reinstall the batteries and then hit the program button 3 times in first few seconds.

[@billybogota2233]

Will this keypad work with a mighty mule gate opener? Should have bought a ghost. Looks like better quality.

[@Shookmeister]

@@billybogota2233 Negative.

[@fredcearley704]

I have a problem with my keypad how do I fix it

[@johnclark928]

Am I the only one that just HAD to paste "IT" after the SEND button?