Learn how to balance tires like a pro in minutes! Must see first step! BikeMaster Balancer 800-256

  Рет қаралды 272,018

How 2 Wrench

How 2 Wrench

Күн бұрын

Пікірлер: 350
@How2Wrench
@How2Wrench 2 жыл бұрын
Bikemaster Wheel Balancer: amzn.to/3UzsPDv Other tools we use! amzn.to/3pIIxOZ
@craiggoldstein2461
@craiggoldstein2461 2 жыл бұрын
Been balancing my own MC tires this way for 25 years.....One top tip I would offer is before mounting new tire, take tire-less wheel on the balancer and find the TRUE heavy spot of the wheel. its not always the valve stem. Mark the wheel this way when you mount a tire with a dot indicating the light spot of tire, you can align the dot with the TRUE heavy spot of the wheel and this usually results in less weight required to get a perfect balance.
@rivec33
@rivec33 2 жыл бұрын
Damn that’s great advice. Doing my first tire change on my motorcycle and will definitely use this tip. Assuming the tire I ordered that hasn’t arrived yet even has a dot.
@craiggoldstein2461
@craiggoldstein2461 2 жыл бұрын
@@rivec33 If you need any help or tips lemme know
@rivec33
@rivec33 2 жыл бұрын
@@craiggoldstein2461 cool thanks. Doing it sometime next week. Looks easy enough.
@rivec33
@rivec33 2 жыл бұрын
@@craiggoldstein2461 think I did ok. My tire did come with the yellow dot. Lined it up with the heavy part of the rim (which wasn’t the valve stem) and had to use 7 quarter oz weights to get it balanced. Decided to break the bead and tried it at with the yellow dot at the valve stem (valve stem ended up being at about 2 o’clock to the heavy part of the rim) and the yellow dot only took 6 weights to balance somehow. Was thinking of breaking the bead and spinning the tire around on the rim on the balancer to see where it landed the best balance without any weights and go from there but the service manual says not to exceed 3 oz and since it is only half that decided to just leave it alone. I would have been good either way I guess. I’m wondering if the yellow dot on the tire was incorrect.
@craiggoldstein2461
@craiggoldstein2461 2 жыл бұрын
@@rivec33 Rivec, you clearly have a solid handle on the process. Well done sir! yes 1.5 ounce is OK and I would have left it alone too. What brand tire was it? I have a buddy who runs Shinkos (I tried talking him out of it) and did the last two for him same model Shinko....First one took 2.5 Ounces no matter what I did...the second one only 1 ounce....I think their quality control isnt the best.
@GibbAsp
@GibbAsp Жыл бұрын
I've been working on bikes for over 40 years but thanks to this channel I am still learning new things. Thanks for everything.
@How2Wrench
@How2Wrench Жыл бұрын
Cool. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@steveh100
@steveh100 Жыл бұрын
Best vid on balancing, that first bit where you got the axle really firm is where i have not been paying attention... thank you
@How2Wrench
@How2Wrench Жыл бұрын
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@pvanwienen
@pvanwienen 3 жыл бұрын
Ive even put the wheel in with no tire and marked the heavy side of the wheel then mounted the tire and checked the balance and as it drops to the heavy side i will spin the tire accordingly and check it again just to use less weights some times they are perfect ! its alot of extra effort though ! Bro you look great your diet worked well !
@How2Wrench
@How2Wrench 3 жыл бұрын
Right on. Not sure if I covered that in the video or just told my my student about the wheel check! You rock... Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@DonDecker-tr3yy
@DonDecker-tr3yy 7 ай бұрын
I have to say this is the best video on balancing I have seen. Very thorough and done well. Well as in keeps you interested. No repeating that isn't needed and one lesson always leads to the next in perfect order. We'll done.
@How2Wrench
@How2Wrench 7 ай бұрын
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@thedahlins
@thedahlins Ай бұрын
Brilliant! I've read through many of the other comments and they all say how well you have presented this. I want to add my voice in appreciation!
@How2Wrench
@How2Wrench Ай бұрын
Glad it was helpful! We love sharing comments like this with Shane. High Fives or making us better are a gift. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@martinhauk1852
@martinhauk1852 2 жыл бұрын
Since a lot of weights are made of steel instead of lead, or if you are using spoke weights, if I need to split the weight, (ie need one and a half weights), I use two weights and spread them apart an equal distance from the light spot of the wheel. This averages out the effect of the weights on the light spot and brings the wheel in balance.
@DannyB-cs9vx
@DannyB-cs9vx Жыл бұрын
I put an orbital sander against my bike frame at the wheel, (side of sander touching, and not the pad), with nothing touching the wheel like a chain, brake caliper. The vibration from the sander will reduce the friction of the bearings and the tire will rotate with the heavy point down. With spoke wheels I have used solder wrapped around the spoke at the rim for weights.
@How2Wrench
@How2Wrench Жыл бұрын
Wow...thanks wild and detailed Danny! Shane
@niconine268
@niconine268 Жыл бұрын
All your video's are brilliant. I appreciate the fact that you explain everything fully & concisely. Even adding tips as you go. This is like been given experience that I have not earned yet. All that experience & insight makes for really gratifying end results & bikes performing beautifully
@How2Wrench
@How2Wrench Жыл бұрын
Hello nico Nine. So nice of you to take the time to mention. We love sharing these with Shane to encourage him. It's just so wild to see such ridiculous comments on how he "is too detailed" (I'm saying it must nicer than they did) in the last comment and then the next one is like yours (and some others) being supportive...you have to block out a lot of noise on KZbin to stay in it....just wanted to say we welcome fans like you on the channel. Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@rosscoyates
@rosscoyates 9 ай бұрын
Years ago I worked in a tire shop that used bubble balancers. This was before high speed balancers were developed. They worked basically the same as what you are doing here. We would find approximately the amount of weight that was required to balance the heavy spot and then doubled that amount. The two weights were then placed 120 degrees from the heavy spot to make three areas of equal weight. We thought this would reduce the chance of the tire creating a wobble side to side. When you place the two weights you just move them a little one way or the other until the tire is balanced perfectly. This way you don’t have to trim the weights.
@callmeanythingbutlatefordinner
@callmeanythingbutlatefordinner Жыл бұрын
This is a demo of static balancing. It's also a good idea to split your balance weight up, putting 1/2 on each side of the rim, especially with today's wider tires. Adding all of the weight to only one side can result in uneven weight distribution (dynamic balance) causing wobble, shimmy, and excessive tire wear.
@How2Wrench
@How2Wrench Жыл бұрын
Cool. Thanks for the added value. Keep them coming for the community. Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@biteme4338
@biteme4338 8 ай бұрын
I was going to make the same comment, static balancing is adequate when the wheels are relatively narrow. Loading the weights all on one side can exacerbate a dynamic imbalance, splitting them holds that side to side imbalance to a minimum.
@nitramdoow91
@nitramdoow91 10 ай бұрын
What an awesome informative video!
@How2Wrench
@How2Wrench 10 ай бұрын
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@bobcaygeon4533
@bobcaygeon4533 Жыл бұрын
What a great video. Concise, well explained. As a 62 year old rider that will never balance my own wheels/tires. It’s always great to learn.
@How2Wrench
@How2Wrench Жыл бұрын
Thanks Bobcageon! Appreciate the kind note. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@anonimous2451
@anonimous2451 Жыл бұрын
I concur. 63 here
@How2Wrench
@How2Wrench Жыл бұрын
@@anonimous2451 Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@anonimous2451
@anonimous2451 Жыл бұрын
@@How2Wrench It was in my suggested list bruh. I repair bikes as a hobby. I find old forgotten relics and fix em up. 90% of the time it is a easy problem to solve, that someone did not fix and left sittin. But I only do Low Mileage bikes. Higher mileage tends to have other issues with the engine internally. Or Gearbox and as old as they are those parts just are not available. I know how to wrench and thanks for the offer. Think I will pass.
@How2Wrench
@How2Wrench Жыл бұрын
@@anonimous2451 Keep Wrenching as we say...if you ever get stuck on something we are here. Make it a great day. Jenny
@lornetontegode6986
@lornetontegode6986 Жыл бұрын
I don't know if it's been mentioned in the comments yet but I also turn the shaft 180 degrees, relative to the wheel, as a final check to ensure I'm not dealing with a cone to shaft off-centre issue or a slightly bent shaft.
@How2Wrench
@How2Wrench Жыл бұрын
Cool. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@340phil3
@340phil3 Жыл бұрын
I use blue painters tape to mark locations and temporarily hold weghts.
@How2Wrench
@How2Wrench Жыл бұрын
Right on Phil...🙏 Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@thedaydreamer7972
@thedaydreamer7972 Жыл бұрын
What I like about shanes videos is that hes not OK with something 90% perfect, he like to go the extra step in all his videos to ensure tires, carburation, wire routing is about as perfect as you can get, thats the way I like to do things, I find with wrenching if you take the extra time to make things perfect you get a bike that really runs amazing
@How2Wrench
@How2Wrench Жыл бұрын
You rock for commenting! What a compliment....We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@rocknraptor3195
@rocknraptor3195 Жыл бұрын
I agree! Anything worth doing is worth doing right. Not half, not almost, not just good enough, 100% to my ability. Can enjoy seeing someone else do the same, you can tell their care & take pride in their work.
@locci2
@locci2 3 жыл бұрын
A nice tip for racing/trackdays is to also mark the side of rim and tire so you can see if the tire slips on the rim. If you're using the tire/wheel combo for more then one session and it has twisted badly atleast you're able to spot it and have it rebalanced. A 600 has no problem turning the tire about 1/4 on the rim. Even if you're going light on the mounting lube :)
@How2Wrench
@How2Wrench 3 жыл бұрын
Good tip! Always welcome here! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@illhaveanother4365
@illhaveanother4365 Жыл бұрын
Don't beg, sounds pathetic
@Scummy_shovel
@Scummy_shovel 11 ай бұрын
Interesting. I been riding all my life and never knew tire slippage on street bikes was an issue. Happens on motocross bikes often . Even with rim locks. I’m gonna mark my 636 tires and see if they ever have any slippage. I prob don’t ride it hard enough tho.
@drumskas
@drumskas 2 жыл бұрын
Man best video I've seen on this field so far, no hidden secrets, thank you. Thanks to you I feel like I can attempt to do this myself. My biggest challenge will be replacing the tire, I don't know if I'm capable of doing that without damaging the rim
@How2Wrench
@How2Wrench 2 жыл бұрын
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@GrumbleB
@GrumbleB 2 жыл бұрын
Just get a set of tire spoons/irons and some rim guards, zip ties and of course don't forget to use some slippery stuff, windex will work. Lots of videos on how to do the zip tie method most don't care about their rotors like I do so use some wood blocks if you want to keep your rotors from contacting the ground or bench to keep from damaging them . I am in the process right now and it isn't that hard . My rims are all scratched up from previous owner and they need to be repainted so I didn't use wheel guards now I have a few more scratches to deal with my advice get them and use them ...
@How2Wrench
@How2Wrench 2 жыл бұрын
@@GrumbleB Thanks for helping Brandon! You rock for commenting! Smash to sub button and we welcome your comments! Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@DonDecker-tr3yy
@DonDecker-tr3yy 7 ай бұрын
Dude the most important part about mounting a tire is making sure the seals on both sides of the tire meet in the middle. The hole is smaller then the rim outside and it is not inside the rim. It's physics at work. Watch some vids on that. Some people use zip ties and some just put their knee on the tire opposite the side you are tire tooling on the tire. This dude probably has an excellent video on this going by his balancing video
@SpoolinVR
@SpoolinVR 5 ай бұрын
I have been doing my own tire changes (also many friends) and balancing for 5 years now. I do street tires and slicks. I always remove the old weights and start from scratch. Only time I consider myself getting lucky is a rim needing no weights. That’s a rare occurrence and much appreciated.
@TexasEdition
@TexasEdition Жыл бұрын
does the little bit of duct tape throw off the weight at all when you are testing?
@chugg535
@chugg535 8 ай бұрын
Yeah, I could get lucky! My mantra since I was in high school. I've balanced my motorcycle tires for years now, but I always rewatch your video to make sure I'm not forgetting anything.
@How2Wrench
@How2Wrench 8 ай бұрын
That is awesome! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Want even more? Join the channel. And you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@StreetMotoZ
@StreetMotoZ 5 ай бұрын
Curious, why not use clip on coated lead weights on the center of the rim? Is it because of the spokes?
@karras6239
@karras6239 5 ай бұрын
Something i learned through cranckshaft balancing to help with finding that spot faster and easier is to introduce a tiny amount of vibration, using a tool like a grinder or a drill and place it on the table (or resting at the side of the balancer to make contact if it has thick rubber base) and turing it on. Despite being being very little, that vibration shake things up enough to help to move the wheel (and also the cranckshaft if you are balancing that) to the heavy spot.
@How2Wrench
@How2Wrench 5 ай бұрын
We sent this to Shane and he said thank you. He wants to try is next time! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@James-fk2sb
@James-fk2sb 4 ай бұрын
What are your thoughts on bead weights that are available ?
@BobKramer51
@BobKramer51 Жыл бұрын
I recently started using Ride On balance beads. They seem to work fine . Ive been up to 90 mph with them and no issues. No more weights on my rims.
@How2Wrench
@How2Wrench Жыл бұрын
Thanks for the feedback Robert and the sub! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@sanjosejeff
@sanjosejeff Жыл бұрын
Thank you so much, I’ve always wanted to balance my dirt bike wheels especially after I did the tubliss system which makes the front even more noticeable after 55 mph. Not really mandatory tho but my 890R is about to arrive so now I’m motivated. This is a very good video. I just subscribed to your channel thank you so much
@How2Wrench
@How2Wrench Жыл бұрын
So funny to get such good comments like this yet the last one complained about talking to much...lol We gave them the boot....you get to stay, are welcomed and we will share with Shane in the weekly sync... Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@Soulriderpowder
@Soulriderpowder 2 ай бұрын
What weight should I get for cubic metal weight for balancing tire?
@2bad1
@2bad1 Жыл бұрын
Basically the way I’ve been doing it but not the way I was told to do it. But it works. Very good video.
@How2Wrench
@How2Wrench Жыл бұрын
Glad it helped confirm it for you James! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@paulf9459
@paulf9459 Жыл бұрын
I use balancing beads, cost about $2.00 to do both tires. No equipment necessary and maintains balance thru the life of the tire. ABC balancing beads are statically charged and stays clinged to the inside of the tire and doesn't erode the inside of the tire.
@How2Wrench
@How2Wrench Жыл бұрын
Nice...These are it right? amzn.to/3TdN0qU You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@skxj
@skxj Жыл бұрын
Yes sir I use beads to balance all my tires it is by far the best way. Cheers
@outdooradam
@outdooradam Жыл бұрын
Where do you find the oz. chart for tire size?
@lupuszzz
@lupuszzz 5 ай бұрын
How does a leveled balancer influence the procedure?
@ohwell2790
@ohwell2790 9 ай бұрын
I have been ridding for 64 years and have always just wrapped thick solder around the spokes and has worked for 6 decades. Now that bikes have these tubeless wheels divide the weights for balancing. I think side loading these bearings just add friction to the rotating mass. When using those stick on weights put half on one side and half on the other side. That way there is no dynamic unbalance. That way it eliminates dynamic unbalance if just on one side that is just static balance. Now I just use internal balancing beads.
@GodzillaGoesGaga
@GodzillaGoesGaga 4 ай бұрын
Nicely explained. I learned something from this.
@How2Wrench
@How2Wrench 4 ай бұрын
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@joehiatt1992
@joehiatt1992 Жыл бұрын
I been doin the same, I also move the weight mm sometimes to get it right and yes dont throw old weights out use them & cut them up & weigh on a digital scale to get it perfect,I do mine & friends & works great
@How2Wrench
@How2Wrench Жыл бұрын
Cool. Thanks for the added value. Keep them coming for the community. Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@greentravelingmachine
@greentravelingmachine Жыл бұрын
How do you feel about balancing beads inside the tire?
@manuelmontiel5418
@manuelmontiel5418 Жыл бұрын
If you notice the rotor is not running true when you check with an indicator. Hiw many thousands runout would you find acceptable? .005? .01?
@seekter-kafa
@seekter-kafa 4 ай бұрын
what about splitting pieces on both sides of the rim; say you need 6 pieces, is it better to put all 6 in a row, or put 3 on one side and 3 on other ''inner'' side of the rim???
@sixwheelcarlisle8491
@sixwheelcarlisle8491 Жыл бұрын
I just liked and subscribed because this may have just saved me a few hundred dollars in one tire change, and Thousands in the long run. Thank you!❤👍🏻👍🏻
@How2Wrench
@How2Wrench Жыл бұрын
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@raulcarreon2751
@raulcarreon2751 10 ай бұрын
Not sure if someone already asked, but how do you decide what side of the wheel (sprocket side or rotor side) to put the weighs on? Thanks.
@amanda1500
@amanda1500 7 ай бұрын
I was wondering the same. On my previous original factory tires, the weights were on one side on the outer side of rim. I just had tires replaced at Harley dealership and they put the weights across the entire rim. Not sure what is correct or poor workmanship.
@AffinityInspiration
@AffinityInspiration Жыл бұрын
Thanks for this most excellent video. Very clear. Very detailed. Really suits my attention to detail. Also highlighted the excellent wheel stand. I’ll be getting one. Running an NT650 Honda with bad vibration. Wheels definitely need balancing. Now I know exactly how.
@How2Wrench
@How2Wrench Жыл бұрын
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@Joey.Darkwoods-Studio
@Joey.Darkwoods-Studio 2 жыл бұрын
Best video i've seen so far! Thank you!
@How2Wrench
@How2Wrench 2 жыл бұрын
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@Guy-ky9mc
@Guy-ky9mc Жыл бұрын
Great advice, good demonstration. I change and balance my own tires and balance this way. I bought a cbr1100 with a severely unbalanced front tire and it was scary dangerous beyond a certain *cough* point. I thought it was suspension or something else. After changing and balancing the new tire, it was vastly better (aka right)
@How2Wrench
@How2Wrench Жыл бұрын
Thanks Guy! Good to hear you got it fixed and can ride safe! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@stillfast1
@stillfast1 8 ай бұрын
Excellent description and demonstration.
@How2Wrench
@How2Wrench 8 ай бұрын
Glad you enjoyed it! We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Want even more? Join the channel. And you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@mab0852
@mab0852 Жыл бұрын
To get those cones good and tight, you can put a palm sander (padless) on the end of the rod as you push on the cone. It will line right up and lock up tight with the help of the vibration.
@twisted_void
@twisted_void 2 жыл бұрын
I keep seeing people saying to use tape to secure weights. Did you ever experience weights coming off? I find it that a proper clean/degrease of the spot where you put them on, will ensure they never come off.
@How2Wrench
@How2Wrench 2 жыл бұрын
We asked Shane this one and he wanted to respond..."Yes, we see many wheels without wheel weights coming into the service shop. I also see them in many intersections waiting for a red light...😉 The fact of the matter is, no matter how much you try to get everyone to perfection cleaning and placing on an exact surface curve to fully take advantage of the full tape also while preventing a edge for something to catch and rip it off (even while cleaning), the only way I've ever seen one NEVER come off, is with full tape coverage. I can't help but agree with twisted_void that attention to detail goes along way BUT most people don't have or care about it." Shane You rock for commenting! Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@chipmunkshavenuts
@chipmunkshavenuts Жыл бұрын
Just adding that some race organizations and track day organizations require the tape to pass tech inspection. I don't have any other information though. I believe they do sometimes come off.
@twisted_void
@twisted_void Жыл бұрын
@@chipmunkshavenuts i just don't get it. If the glue on the weights fails, i cannot believe that a bit of tape to will hold weights in place.
@chipmunkshavenuts
@chipmunkshavenuts Жыл бұрын
@@twisted_void Centrifugal force would hold it against the wheel when moving. The tape/glue holds it for when not moving and slow speed. The adhesive on the weights can be mediocre, but it’s fairly consistent on duct tape. Also, as stated, racing and track day tech inspection requires it.
@dna971
@dna971 3 жыл бұрын
That balancer you are using, will it accommodate a 21” rim and tire? A Harley front wheel from a wide glide?
@How2Wrench
@How2Wrench 3 жыл бұрын
Absolutely. Even 21" with big knobbies....Amazon Product Link Bikemaster Balancer: amzn.to/3eNdYTH Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@wauterst23
@wauterst23 Жыл бұрын
Quick question, does it matter where you put the wheel weights? I mean calliper side, sprocket side or middle?
@How2Wrench
@How2Wrench Жыл бұрын
Good question. I try to keep them as close to center as possible mote to "protect" them from getting knocked off. It takes a wheel wider than 6" to seem to really matter (from what I hear). I just have never had a wheel balance problem using this shown method. Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@BrickHouseBuilds
@BrickHouseBuilds 2 жыл бұрын
Great video!
@How2Wrench
@How2Wrench 2 жыл бұрын
Glad you enjoyed it! You rock for commenting! Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@cranerigging3604
@cranerigging3604 Жыл бұрын
The places we ride " Close Enough " is good . 😁
@ACommenterOnYouTube
@ACommenterOnYouTube Күн бұрын
Have the No Mar balancing setup, same as this one and i have 3 tires that won't move or budge. I drop all 3 tires on there and they don't even move. I took the weights off all 3 tires and there should be a heavy spot but neither of the tires will shift to the heavy spot. I manually turn the tires 1/2 way, 1/4 way, 3/4 way and wait until the heavy side takes it but nothing .....
@AmbaMerlinson
@AmbaMerlinson Жыл бұрын
at the workshop we have axles with diff diameter. no need for cones. ex. adapter needed for ie vfr 800 or other bikes with one arm rear suspension
@joeybobbie1
@joeybobbie1 Жыл бұрын
Thank You for the Video. Great Job on showing how to Balance the Tire.👍👍
@How2Wrench
@How2Wrench Жыл бұрын
Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@kevinmair7571
@kevinmair7571 Жыл бұрын
Hi, Great video. I normally put the weights on the left and right split 50/50. I also put black duct tape over but only because I bought steel (silver)weights on my black rims 😂
@MultiPleaser
@MultiPleaser Жыл бұрын
What do you do if the bearings were hammered in one whack too much, and the wheel won't turn on the balance stand, but it will turn when torqued onto the bike? And did you ever notice that f it turns on the balance stand just fine, when torqued onto the bike, it squeezes the bearings and the tire won't turn? This makes me WANT to whack the bearings one extra time so it spins free when torqued onto the bike (to reduce rolling resistance, reduce wear on the bearings, save gas, etc).
@JerryHawk250
@JerryHawk250 Жыл бұрын
Good video on how to balance. 👍 Don't need any fancy wheel balancer though. A pair of jack stands and axle bolt will achieve the same results.
@How2Wrench
@How2Wrench Жыл бұрын
Right on Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 800 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@louismartin4446
@louismartin4446 11 ай бұрын
HOw about thoroughly cleaning the wheel? What happens when yo get small stones getting stick in the sipes?
@localenterprisebroadcastin5971
@localenterprisebroadcastin5971 Жыл бұрын
My local shop balances and mounts the tires for free (off the bike) if I buy the set from them…they also offer a deal where if I buy the rear the front is half off. I don’t know how this place stays in business but they’ve been around for 25plus years 🤷🏼‍♂️
@How2Wrench
@How2Wrench Жыл бұрын
That's pretty wild. I don't know how they make it either...You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend... Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@peterjamesmurray1
@peterjamesmurray1 Жыл бұрын
Great video. Thanks. And yes, folks, this os how they balance tires at the top level in MotoGp. 💯👍🏁
@How2Wrench
@How2Wrench Жыл бұрын
Thanks for backing up the content a subbing Peter...shocking a few folks on here struggled with this one...LOL Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@gs-nt6nf
@gs-nt6nf 2 жыл бұрын
would it be possible to balance the tire and the wheel separately and match up the spots where they might balance each other out when the tire is put on the wheel?
@N269
@N269 Жыл бұрын
Absolutely! 1) find the heavy spot of the rim (without tyre). Mark it. 2) Balance the rim WITHOUT tyre. 3) Place tyre on rim, 1 bead ONLY. Find the heavy spot of the tyre. Mark the tyre heavy spot. 4) Rotate tyre so the TYRE HEAVY spot OPPOSITE heavy spot on rim. 5) Complete tyre install. 6) Remove weights from rim balance(2). 7) Balance wheel. I normally balance all wheels with their respective bitz (ie with brake discs and sprocket carrier). I have a junk front rim that is balanced perfectly and use that as my tyre weight finder for both front and rear tyres.
@markpieterse2568
@markpieterse2568 Жыл бұрын
Hello, great video - I'm about to embark on changing my own tyres and this has been superb. Apologies if you've answered this before (I may have missed it) - is there a rule of thumb as to where on the rim you put the weights once you've found the perfect position? By this I mean outer edge of the rim (where the originals were on your demo wheel), closer to the centre of the rim and also does left side/right side make any difference? Many thanks.
@How2Wrench
@How2Wrench Жыл бұрын
Thanks Mark! We grabbed Shane quick and he said always tries to put closest to the center of the rim for less chance road debris would possible knock it off (hence another good reason for the "duct tape") With motorcycle wheels being pretty narrow compared to auto/truck wheels, he said he has never experienced with moving around the weight to see a measurable difference. Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@mrboostification
@mrboostification Жыл бұрын
Is 40 grams too much? i already rotated the tire 180degrees but the heavy spot changed also 180degree. (no balancing dot michelin road 6 tire)
@nickaxe771
@nickaxe771 Жыл бұрын
The stick on weights.....if I pull them off is there any way to re-use them on a spoked bike wheel. Edit....yes I refitted my old weights with a smeam of silicone sealant.
@robertwotring7318
@robertwotring7318 6 ай бұрын
I did my front and was at 3/4 oz. I put gorilla tape over the weights and that became the heavy spot on the wheel. 🤬
@go5582
@go5582 2 жыл бұрын
Hi great tip - on how to center the cones.
@How2Wrench
@How2Wrench 2 жыл бұрын
Glad it helped! You rock for commenting! We will let Shane know! Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@johnwargo2590
@johnwargo2590 4 ай бұрын
Always remove the old weights when you balance a new tire. Start fresh, same as you do an automobile wheel. You balance the whole thing as a rotating assembly. "Heavy" part of the rim doesn't matter, the end result does.
@justadam1917
@justadam1917 Жыл бұрын
You can improve your dynamic weight distribution by splitting the weight in half and stick one to each side of the rim
@How2Wrench
@How2Wrench Жыл бұрын
Thanks for the added value in the comment section. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@MyllekeBas
@MyllekeBas Жыл бұрын
Like always, very interesting tips! Thank you sir!
@How2Wrench
@How2Wrench Жыл бұрын
Glad you like them Karl! You rock for commenting! We will let Shane know! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@frankstone8930
@frankstone8930 Жыл бұрын
No need to pull up. Push the top cone down and you'll be fine 😂
@Sledheadx27
@Sledheadx27 7 ай бұрын
Not a lot of people understand physics. You’re right though. The weight of the wheel with him pushing on it is doing more then trying to pull it up 😂
@BrattyBiker
@BrattyBiker 3 жыл бұрын
Amazing video! Are you still working at Suzuki ?
@How2Wrench
@How2Wrench 3 жыл бұрын
Not anymore. Check out my about tab for the latest! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@tomupchurch4911
@tomupchurch4911 Жыл бұрын
On the welding stick...soapstone is the term you're looking for.
@How2Wrench
@How2Wrench Жыл бұрын
Thanks Tom. 🙏 Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@PeterBaumgart1a
@PeterBaumgart1a Жыл бұрын
What if the wheel has no axle, like on a BMW R1200, ie shaft drive?
@How2Wrench
@How2Wrench Жыл бұрын
There are single sided adaptors. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@GSXRKID
@GSXRKID Жыл бұрын
great vid
@How2Wrench
@How2Wrench Жыл бұрын
Thanks GSXRKID! Cool. We love tips! Links below. We also love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@digger8180
@digger8180 5 ай бұрын
Fantastic post, thank you.
@How2Wrench
@How2Wrench 5 ай бұрын
You're welcome. We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@colbyscott9822
@colbyscott9822 2 жыл бұрын
This may be a dumb question but seems like all thread would be a better choice for your axle rod, given the need to make sure the cones are properly snugged up. What am I missing?
@How2Wrench
@How2Wrench 2 жыл бұрын
I've been thinking of taking the time to make one and record the difference for years and never do...maybe you've just inspired me to add this to the video list BECAUSE I'm so curious too... You rock for commenting! Grab our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@chipmunkshavenuts
@chipmunkshavenuts Жыл бұрын
All thread would be gamble as far as accuracy of the threads for rolling on the bearings, and also for it being straight. Everything made has tolerances, and threads on all-thread would be looser tolerances than a precision ground rod that would come with nicer balancing stands (not critiquing the one in this video, I wasn't looking at the rod that close and have no interest in being negative). The cones themselves would also be looser, as threads are smaller than the diameter they are called by. A 3/8" thread has a major diameter smaller than 3/8". That said, if a current setup has the cones getting loose or not getting tight enough, then it might still be an improvement. I say all this as a mostly hobby/part time professional manual machinist that's also done some light reading of the machinery handbook for fun.
@AnalogDude_
@AnalogDude_ Жыл бұрын
How you balance a rear wheel for a BMW R100, R1100, R1150, etc or any other single sided?
@How2Wrench
@How2Wrench Жыл бұрын
We grabbed Shane quick and said there are cone adaptors. He just ordered a set for his Ducati and will be making a video. Sub or join to m=not miss it. Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Glad it helped! Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@How2Wrench
@How2Wrench Жыл бұрын
Something like this: amzn.to/3C06Gqs
@How2Wrench
@How2Wrench Жыл бұрын
www.google.com/search?q=single+sided+wheel+adapter+for+motorcycle+balancer&oq=single+sided+wheel+adapter+for+motorcycle+balancer&aqs=chrome.0.69i59j69i60l2.359j0j7&sourceid=chrome&ie=UTF-8
@conservative-proud
@conservative-proud Жыл бұрын
I don’t use cones, I made some spacers that fit snuggly into the bearings, and it’s much better… the cones don’t need to be as tight as you did them, but as long as they don’t slip on the inner bearing race is enough… the harder you press the cones it, that come tighten the bearings to prevent them from turning freely…
@How2Wrench
@How2Wrench Жыл бұрын
We've done that for popular models we did often too. Solid fix to avoid human error. Cool. Thanks for the added value. Keep them coming for the community. Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@ZachGavin1204
@ZachGavin1204 2 жыл бұрын
Hey man. good day. Just a question. What do you call the tool you used to hold the wheels ( where you put the mounting cones )
@How2Wrench
@How2Wrench 2 жыл бұрын
Sorry this may sound silly as I'm just the social media manager but Shane is in Japan training techs for a month. He is answering member questions daily (link below...Best $2 you can do to show support and get him directly daily!) But let me try... Here is a link to the entire tool. Maybe the ad will have what you're looking for or the instructions to download. amzn.to/3A94Tyw If you are talking about the shaft the cones are mounted on, it comes in the kit too. Glad it helped! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@RideWithTheWolf
@RideWithTheWolf 5 ай бұрын
Can I balance the wheel on the bike? I don't have a wheel balancer ... also, how is this going to kill me if I don't balance the wheel?
@edwardmalfroid946
@edwardmalfroid946 3 жыл бұрын
Do you have a source for lead weights? I have HF steel that are more difficult to contour to the rim, I want all the adhesive to make contact with the rim.
@How2Wrench
@How2Wrench 3 жыл бұрын
K&L Supply Dealers! Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@obee69242000
@obee69242000 3 жыл бұрын
do i have to remove the wheel spacers then put the cones up against the wheel bearings
@How2Wrench
@How2Wrench 3 жыл бұрын
Let me try and see I can catch Shane to answer quick. His internet is limited right now until the weekend. Shane is in Africa training students this summer. We are just the social media team. He plans on answering channel MEMBER questions each Sunday! Not a member yet? Here are the details! Want him to drop his wrenches and help you? He loves helping members and it is only $1.99 a month to join (more options if you really want to say thank you too) All member tech questions like this get directly forwarded to him every day! Here is how to get in! * Join here: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin * Just looking to give us a high 5? Click here: www.paypal.me/how2wrench * Is this an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/product/personal-tech-training-phone-facetime/ Note: If you are a new channel member please reply back and we will see your KZbin Member handle in your name. We will have a private member-only FB and web page coming he can directly do Q/A there! Thank you for being patient as our growth has blown up!
@martinhauk1852
@martinhauk1852 2 жыл бұрын
Yes. The cones won't center the smaller axle if not on the bearings.
@tubeonline629
@tubeonline629 3 жыл бұрын
Are the balance beads not any good? Seems like a perfect balance, but I don't know.
@How2Wrench
@How2Wrench 3 жыл бұрын
I don't use them. Not because they don't work as it seems proven in other industry's, but mostly because its a mess for the tech...doing tires all day would create quite the mess and its hard enough to get techs to clean this area...lol Awesome and thanks for commenting! Can you smash that subscribe button and share our channel please? We have over 700 videos in playlists! Even more training and deep dives if ever needed… Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@prmhighflr69
@prmhighflr69 2 жыл бұрын
Hey aren't you with Western Iowa Tech are you still working with them..... does that make sense...lol👍
@How2Wrench
@How2Wrench 2 жыл бұрын
Hi Paul. That program closed the year after Shane left to work for Suzuki USA in 2019. Sad day for sure! You can always find him here at How 2 Wrench! You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@D.Technical.S
@D.Technical.S 2 жыл бұрын
why don't u use a laser on top center op de stand ? this way you have perfect visual reference where to stick ...
@cooldown8175
@cooldown8175 9 ай бұрын
cleaning old weight stickers off is a pain, i like googone the best so far. i wipe rim w isopropyl alcohol before applying weight, and i put half of the weights on each side. in my mind im figuring balanced left n right side is better than all the weight only on one - thoughts?
@pitchforkpeasant6219
@pitchforkpeasant6219 9 ай бұрын
China marker usually works well on marking tires😊
@niconine268
@niconine268 Жыл бұрын
Now i just need to try correct the ding in my dirt bike rear rim
@marklang5169
@marklang5169 Жыл бұрын
Well done!
@DonDecker-tr3yy
@DonDecker-tr3yy 7 ай бұрын
Tip #1 wd 40 will clean the adhesive from the old weights in a snap.
@mikicouch9798
@mikicouch9798 Жыл бұрын
I balance my m/c tires with Dyna Beads. No issues and ez as pie.
@kobayashimaru8114
@kobayashimaru8114 Жыл бұрын
I can't count the number of times my friends and I have been minorly injured from the damn balancing rod slipping off. So I added side plates to each support to keep the rod captive.
@How2Wrench
@How2Wrench Жыл бұрын
Cool. Appreciate you share! Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@alangaudry724
@alangaudry724 3 жыл бұрын
Do you leave the tape?
@How2Wrench
@How2Wrench 3 жыл бұрын
Yes I do! The final cleaned up way at end of the video shows it. Thank you for commenting. Could you spare $2 and support us with even more benefits? Would you consider helping support our work here and help keep us going? We can’t thank you enough for helping us keep making technician training impacting schools all over the world. Smash the subscribe button and bell! Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Just want to say thanks quick to support us for this information and our work saving you money? Give us a high 5 here: www.paypal.me/how2wrench
@normanmatura
@normanmatura 7 ай бұрын
Thank you very much love the video
@How2Wrench
@How2Wrench 7 ай бұрын
🙌
@PaulG.x
@PaulG.x Жыл бұрын
The cones are superfluous. I built a balancer much the same as this , with the support bearings on the uprights. But I use a 19mm straight axle to support the wheel. The 19mm straight axle is undersized for the wheel bearings. The wheel self aligns on the axle because gravity forces the ID of the wheel bearings to do that. The rest of the alignment is normal and is always reproducible which proves the balance is correct. And the wheel never wobbles on the balancer. The use of cones actually eliminates that self alignment under gravity *if the cones are not tight* . So the cones are superfluous.
@anthonydendle4768
@anthonydendle4768 2 жыл бұрын
Has anyone tried match balancing the tyre to the wheel , meaning take all weights off and check balance then deflate and rotate tyre on wheel and check balance again and so on , then after you get as close as possible then add smallest weight needed rather than just putting tyre on wheel and adding whatever weight needed big or small
@atvtinker01
@atvtinker01 Жыл бұрын
If you put the tire's light spot mark at the valve stem, you're essentially doing that. That's why the manufacturers mark their tires with a colored dot on the outside or a sticker on the inside of the tire. It surprises me how many dealers don't pay attention to the mark on the tires. 🤦🏻‍♂️
@robertwotring7318
@robertwotring7318 6 ай бұрын
@@atvtinker01unfortunately a lot of tire manufacturers don’t do the dot anymore
@chrisreynolds3204
@chrisreynolds3204 6 ай бұрын
That's the way!
@ph0rd
@ph0rd 5 ай бұрын
Guide says "yes and then all life in that galaxy suddenly teleported to a parallel universe of perfect balance, where nobody ever slipped, even on a banana peel."
@larrynorsworthy8582
@larrynorsworthy8582 11 ай бұрын
Painters tape is lighter and less sticky if you're removing it.
@How2Wrench
@How2Wrench 11 ай бұрын
Cool. We love tips! Links below. We also love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@normanmatura
@normanmatura 7 ай бұрын
I learned a lot thanks
@How2Wrench
@How2Wrench 7 ай бұрын
We love sharing comments like this with Shane. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@Sgtyork488
@Sgtyork488 23 күн бұрын
Thanks
@How2Wrench
@How2Wrench 18 күн бұрын
We love sharing comments like this with Shane. High Fives or making us better are a gift. Thanks for sharing and the added value to our wrenching community. Keep them coming. You rock for commenting! We will let Shane know! Jenny Want even more? Best $$$ you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@WiSeNhEiMeR-1369
@WiSeNhEiMeR-1369 Жыл бұрын
Thanks COOP ...
@How2Wrench
@How2Wrench Жыл бұрын
Thank you!
@feellnfroggy
@feellnfroggy Жыл бұрын
Omg, hands off and let it settle! Driving me nuts.
@How2Wrench
@How2Wrench Жыл бұрын
Glad it helped! Thanks! Join the channel. Best $1.99 you'll spend to access all 800 vids and Shane Daily! Smash the sub and like please. Throw Shane a high five donation, channel membership or merch for saving you $$$$$$$ Links below to support more for this work! 🙏 You rock for commenting! We will let Shane know! Want even more? Best $2 you'll ever spend...Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Ways to support or high five How 2 Wrench! Thank you in advance. YOU MOTIVATE US TO DO MORE! 1. Smash the subscribe button (thank if already a sub!) 2. Have you seen our "KZbin Trained Support Shirts? goodfellasmerch.com/collections/how-2-wrench/products/support-shirt 3. High five donation: www.paypal.me/how2wrench 4. Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
@deweydodo6691
@deweydodo6691 Жыл бұрын
I just used balance beads. No problems.
@How2Wrench
@How2Wrench Жыл бұрын
TY
@robertholmes1366
@robertholmes1366 2 жыл бұрын
Good explanation. You got that down pat
@How2Wrench
@How2Wrench 2 жыл бұрын
Glad it helped. You rock for commenting! We will let Shane know! You can give him a high 5 here: www.paypal.me/how2wrench Another way to help us back is joining or grabbing our T-shirt! Support links and gear below! Awesome and thanks for commenting! Smash the subscribe button (thank if already a sub!) Have you seen our "KZbin Trained Support Shirts? Great way to "high five us" goodfellasmerch.com/collections/how-2-wrench/products/support-shirt Join this channel to get access to perks: kzbin.info/door/BhM8DCKnT3qXwTW0eToyCgjoin -Daily MEMBER FIRST COMMENTS ANSWERED FIRST -Live Q/A video chats -Wonder if we have a video on your need? Members can request content links! -Full Access to the ENTIRE 700 video library -Member-Only FREE tool giveaways Got an emergency and your head is about to explode from frustration or fear? Get Shane’s cell here: how2wrench.com/ols/products/techline-one-on-one
Motorcycle Tire Balance : Myths Busted
13:09
TheMotorcycleMD
Рет қаралды 97 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
Cheerleader Transformation That Left Everyone Speechless! #shorts
00:27
Fabiosa Best Lifehacks
Рет қаралды 16 МЛН
Quando eu quero Sushi (sem desperdiçar) 🍣
00:26
Los Wagners
Рет қаралды 15 МЛН
The Easiest Way To True Motorcycle Wheels!
21:23
Cameron Niemela
Рет қаралды 323 М.
STOP Being afraid of Your Tires
14:35
CanyonChasers
Рет қаралды 425 М.
I discover Honda's wheel balancing trick, it's A+ SMART!!!  by Max McAllister & Traxxion Dynamics
7:37
Say No To Spend Tyre Changing - Chris Birch
13:20
Chris Birch - Off Road Coach
Рет қаралды 181 М.
How To Change & Balance Your Own Motorcycle Tires | MC GARAGE
10:25
Motorcyclist Magazine
Рет қаралды 4 МЛН
How To Balance Motorcycle Tires With Static Wheel Balancer
8:41
Nick Buchanan Racing
Рет қаралды 17 М.
GoPro Inside a Car Tire (With Balance Beads)
9:15
Warped
Рет қаралды 2,6 МЛН
How To Balance a Motorcycle Tire and Wheel from SportbikeTrackGear.com
5:56
Sportbike Track Gear
Рет қаралды 487 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41