Learn How to Replace Your Fuser Unit in Kyocera TASKalfa 3510i,3212i,4012i Printer

Рет қаралды 2,375

Күн бұрын

This guide will show you step by step how to replace your Kyocera fuser unit, no matter what level of experience you have with printers. After watching this video, you'll be able to fix your printer and get started printing again!
This video we will show you how to replace the fuser unit in Kyocera printers,The fusers have a useful life of 100,000 to 200,000 printed pages, depending on the model.
The Fuser is the piece that fixes the toner on the paper. This, like any other consumable part, wears out with the regular use of prints, since it is one of the components that suffers the most due to its mechanical wear and overheating of its components, due to the high temperatures it must withstand.
The failure of a fuser is usually caused either by its useful life, or by the deterioration or wear of its components.Therefore, it will be necessary to replace it when the machine notifies the need for a change, either by means of a notice on the printer’s panel with an error code, or when we begin to notice its deterioration.
The most common symptoms that indicate fuser deterioration are:
1 The print leaves parallel spots across a sheet.
2 The printer begins to loosen toner and does not stick to the sheet
3 Stains on printed sheets
4 Annoying noise from gear wear
5 No heating due to lamp failure
6 The printer simply stops printing even though the paper goes all the way.
#kyocerataskalfa
#fuserroller
#kyocera_photocopier_machine
#kyoceraprinter
#fuserunit
kyocera fuser unit replacement
kyocera fuser kit
kyocera taskalfa fuser repair
fuser replace kyocera printer
REPLACING FUSER UNIT KYOCERA how to replace fuser unit kyocera
how clear fuser unit paper jam kyocera
How to remove paper jam in heater unit of KYOCERA
Kyocera Paper Jam Removal
Fix Paper JAM in Printer
Kyocera paper jam 3010i
Kyocera paper jam 3010i/3011i/3212i/4012i fuser fixing cleaning fix