Learn how to sew an insulated, easy-to-clean lunch bag

[@Qui7422]

I miss her. I watched her as a tiny tot. And she taught me alot. Rest well Nancy

[@laurfincher8137]

Do you know there are her videos and blog still online? my post above gives info on that.

[@CherrylMaree]

I would never have thought of doing this....thank you for such clear and easy to follow directions.

[@dancingdiva90950]

so I just made this and some things that needed to be cleared up are: no matter how you pin the layers together the fabric bunches when you see it using the alternative method to the roller foot. also you need 6/8th of a yard of the insul bright since it typically doesn't come double folded. I found 4mm length stitches to hold better. And when putting the one inch square Velcro tabs in the corners place them 1 inch to 2 inches from the top of the bag and 1.5 to two inches from the side edge. Also the front panel only needs the soft Velcro the back panel should have the rough Velcro. Not the front panel needing both soft and rough. Friendly tip. Get extra fabric to practice stitch length on so you know what to expect on your lunch bag.

[@epriedane]

erica whitchurch You absolutely correct. In order to stitch better to have silicon foot plus layers should be glued to each other. That lady likes to sell , like here so many things you can be avoided using a glue

[@vivinhabrasilusa]

Nancy, you are the best! Thank you so much! This tutorial is well explained, right to the point and it shows the steps throughly !

[@rustydip1]

I forgot! I think I would do all my rotary trimming before sewing to make it easier for me & I would probably make the top flap a little wider too. But I love the lunch bag & your demo of how to do it. You are the best!!

[@KellyDannemann]

Nancy this is a great tutorial. Thank you for posting this. With School coming back in session it came just at the right time.. Just want to make sure you knew how much this was appreciated.

[@JimTMcDaniels1]

Nancy, I wonder if that could be done with insulating bags from blue apron. I’d like to share a Great Recycling Idea for reflective insulated bag from Blue Apron that you might want to share with others! I live in Colorado and I like to make battery heat barrier/insulation blankets(wraps) our of the Blue Apron insulated bags, for all my vehicle batteries. So my batteries last longer protected from engine heat, as anything over 90 degrees Fahrenheit, accelerates the battery’s internal damaging corrosion and water loss. Also the battery can perform better in our bitter cold that greatly reduces their output ability over 50 percent and reduces their charging ability when you need them most. Automotive Batteries are expensive and seem to only last 3-7 years. There aren’t many things we can do to extend our battery's life span. There are just a few sellers of aftermarket battery blankets(like the picture below) and even when you find a seller, they don’t always fit larger batteries and are basically too expensive for most to consider. It’s well known in the automotive industry, that our vehicle’s battery’s life is shortened in temperature extremes of the hot engine compartment and the either or hot and cold climates we live in. Because of this, many automotive manufacturers equip their new vehicles with battery blankets usually made from a cloth exterior and fiberglass like interior. However the vehicles considerate enough to originally equipped with these battery blankets too often loose their blankets during battery replacement. Often because the fragile blanket gets torn during removal, OR the new battery installer does not want to bother with slipping the blanket on the new battery, OR the original blanket does not fit the new battery, OR the installer is unaware what the blanket does OR assumes it is part of the old battery case. Making a battery blanket is so easy with the Blue Apron reflective insulation bag which does not conduct electricity. I place the battery into one of the corners of the bag and cut the bag down so that it wraps around the sides of the battery. I use my screw driver end to punch a hole at each bottom corner so if water ever gets in the bag, it can leak out. Then I fold the sides and use box tape to hold the cut areas, the tape sticks very well. Then I use scissors and cut the bag to the level of the top of the battery. Done! Take care!

[@OhISew2]

This is fabulous! I love this and can't wait to get my hands on some oil cloth or clear vinyl! :)

[@rustydip1]

Thank you Nancy! I love your videos. I always watched your show "Sewing With Nancy" on TV but it isn't on anymore. Very disappointed!! Now everything is 'competition' & so called 'reality' programs. I really miss all the 'how to' programs on PBS. Your show, "Quilt in a Day", "The Carol Duvall Show", etc... There was always something new to learn. I miss "the old days"! That makes me sound old but I'm 60 now so I guess it fits. LOL! How can I get the shows back on air???

[@jasminkreativ]

It's too thick to sew. I got always trouble with the needle when sewing thick corner. Can you show how you sew the corner please?

[@Dani-th6cl]

The pinking rotary blade was exactly what I was looking for!!!

[@jasminkreativ]

Good Tutorial! Thank you!

[@cecil2ify]

Rest in peace!!!

[@johnteel1034]

Hello Nancy, I am curious, what purpose to you see to use the washable stabliizer on the edges? Just curious. All my best to you during this challenging times. I so enjoy watching your videos. Love and blessings John

[@Guyana531]

Very good tutorial - easy to follow and everything is explained

[@NancysNotions]

Hi Goldiedawn 76, We are glad you enjoyed the video. Thank you for watching!

[@IRDeezlSmoke]

My favorite part is "rectangles,....that's all you need to know". d:-) I wonder if it would fit, to install a son or daughter's name tag on the front side of the flap when sewing the velcro clasp strip? Or your own name, depending upon who you are making the lunch bag for. Or would a name tag detract the look?

[@NancysNotions]

+IRDeezlSmoke I think adding a name could only add to the design. :) Everyone loves something made just for them.

[@ewan2734]

I use normal clear tape on top and when finished I just tire them out slovenly

[@sandibeach7291]

LOVE LOVE LOVE YOUR VIDEOS!

[@whymelani]

what are options for an old sewing machine that does not have a roller foot????????????

[@gadgetgirlish]

Dear Nancy, I love watching you create your projects & also the way you explain every detail. The idea of this bag is great. Those clips you used instead of pins are fantastic, ive not seen them before, may i ask, where do you get them? Thank you for sharing your talent & inspiration. Lee-Anne :-)

[@dianadivadiamond]

I luv the Lunch Bag. Have you ever made anything from Leatherette & what size needle did you use, that is if you ever did? Thanks very much again.

[@Sewlady718]

Could you make this with the seams on the inside?

[@NancysNotions]

Sure! It's a little easier to clean with the seam allowance on the outside of the bag, but there shouldn't be any issue reversing it. :)

[@mrsfrd]

How did you finish the blue bag?

[@iamfcon]

Good video, I found this because I bought some insul bright for a non-sewing project. Have you by any chance used Insul Shine instead? I know that's a solid silver on one side, was curious if you have used it and how it would compare to insul bright. I'm assuming it would be more of an inner layer, rather than a batting to be stitched between layers.

[@NancysNotions]

Hi F Con, You can use the Insul Shine instead of the Insul Bright and it would replace the need for a inside lining fabric since the shiny metallic would act as your lining. Both are excellent products to use for a lunch bag and would provide the same amount of insulation for the bag. It just depends upon how you would like your overall project to look on the inside. Let us know if you have any further questions! Thanks for watching. :)

[@dancingcouplevideo]

Thanks for the info about the Insul Shine. I need to replace the cheap vinyl lining on a nice bag, so knowing that info helps with the decision to use that instead of Insul Bright and a lining layer.

[@slavicavucinic4056]

Thanks,sooooo much!:))

[@hasselnc]

Did she have a stroke?

[@niamh-learns]

+Nathan Hassel Yes.