Learn LiDAR data processing in 60 minutes | WEBINAR

[@riya_lowsy]

Can I use the software to process the pointcloud frames from VLP16 data?

[@andrewhumirang9067]

Is it possible to first classify ground points and then subsequently execute the removal of outliers from the extracted LAS/LAZ data?

[@CANDRONE]

Hi, please contact us at [e-mail] for training specific to Lidar processing.

[@gracemaina7958]

Very great content. Thank you! Is LiGeoreference a separate Module?

[@CANDRONE]

LiGeoreference is a separate pre-processing software made for the LiAir LiDAR system, it is meant to process the raw LiDAR data into a point cloud. You would then import the point cloud into LiDAR360 for further processing as seen in the video.

[@InspireCam]

Please advise if we can use Lidar L1 and h20T camera at the same time? for example in oblique mission of power line inspection

[@levonlynch]

You can not use both systems at the same time. They both utilize the single skyport on the M300 system.

[@CANDRONE]

This question is a little too specific for us to answer here. Reach out to us at [e-mail] to speak with a team member and we will try and help you.

[@Eduardo-yh3rv]

I did not see any GCP referencing on the Horizontal.There should be a clear way just as you can do an elevation adjustment to do a horizontal adjustment. What is that tool?

[@CANDRONE]

This question is a little too specific for us to answer here. Reach out to us at [e-mail] to speak with a team member and we will try and help you.

[@RuiHernani-yp4yk]

Halo.. what the software that you are using to process the data from DJI Terra. in my Case I use Agisoft Metashape to Continuing process the Data From DJI Terra but unfortunately the accuration of the elevation us not accurate so can u help me???

[@CANDRONE]

Send us an email at [e-mail] and we will try and answer your question.

[@victoriagrima3116]

Which software is being used? The screen showing the step by step exercise is too small to read the steps?

[@CANDRONE]

This is LiDAR 360 from GVI.

[@itzayanacastelan2643]

Does anyone know why when calculating the GCP I get Null under D and Dz? TIA

[@CANDRONE]

This question is a little too specific for us to answer here. Reach out to us at [e-mail] to speak with a team member and we will try and help you.

[@gisdevelopr]

Can you share any dummy data for hands on practice

[@CANDRONE]

This question is a little too specific for us to answer here. Reach out to us at [e-mail] to speak with a team member and we will try and help you.

[@elvinmurtuzayev2532]

which is this app please))

[@CANDRONE]

This is LiDAR360

[@ahmedhamdyahmedhasan1073]

what is the software name please

[@CANDRONE]

LiDAR360: candrone.com/pages/lidar-software Contact our team for a trial key.

[@John_LiDAR]

Great！

[@ajoysekhardatta3847]

yes

[@scratchsatriani]

Im skeptical about "las file from terra does not need to strip align". I test to strip align using LP360 software and saw there is a misalignment.

[@CANDRONE]

Thanks for sharing!