Learn Onshape - Project 12 - Valve Body

View Drawings & Worksheet - drive.google.com/file/d/1xWLu...
View All Onshape Projects - cadvideotutor.com?authuser=1
With these CAD video tutorials, quickly learn 3D CAD sketching and part modeling with Onshape. Watch all of the playlists to see and learn step by step how to create a 3D parts in Onshape. You can get a free Onshape account by using the link listed below. Also, choose the playlist in order that will guide you through the cad video tutorials that demonstrates over 20 projects resulting in your learning to use many of the sketch tools and feature tools available in Onshape for 3D Computer Aided Design and part modeling. All of this for free, free lesson, free software from Onshape. Start learning today
Get a Free account at Onshape: cad.onshape.com
Follow these Playlist Links for all of the Projects:
Lesson 1 - goo.gl/HFGB9e
Lesson 2 - goo.gl/ofPYLv
Lesson 3 - goo.gl/ikGh6E
Lesson 4 - goo.gl/Fc8FQb
Lesson 5 - goo.gl/AWuJjK
Lesson 6 - goo.gl/A88Wew
Lesson 7 - goo.gl/WzHTFS
Lesson 8 - goo.gl/HFGB9e

[@skunkedagain]

excellent training. I like the step by step walktrhough and seeing your methodology. I want more of this stuff. thanks for sharing

[@nahueljo]

This is awesome! You make it look very easy. Just a little tip that I found yesterday: you don't need to create that last axis for the circular pattern. If you just select a circle that would be concentric to the circular pattern (like one of your shaft bosses or the counter-bore hole) and it'll accept that!

[@Onshape.Learning.Projects]

Thanks for the info!

[@fabiozanasi8307]

Thanks

[@squidclothes4578]

thanks

[@ibexproductions9776]

Hi! awesome tutorial. I know i’m really late to this video, but i a, having a lot of trouble with the counterbore hole on sketch 5 of this drawing. Around 9:37. it wont go through the extruded feature on plane 1. Any ideas?

[@Onshape.Learning.Projects]

On the courter Bored hole, make sure that you set the depth of the center hole to 275mm. If this does not cut into the boss on the opposite side, check the diameter of the body, it might be too big and the hole depth does not go all the way across. Hope this helps

[@rajeshjogi5980]

Can you pls share the 2d drawings of particular videos

[@krakatoa1987]

Is there a way to put several THUMBS UP at one single video ?? :P