Learn Taxidermy: Injecting and Preserving Bird Feet

  Рет қаралды 12,335

Matuska Taxidermy Supply Company

Matuska Taxidermy Supply Company

Күн бұрын

Пікірлер: 10
@wrknhonks
@wrknhonks 4 жыл бұрын
I use the new Matuska MB and store in freezer before I use , definitely thicker but takes much longer to set up ... Also the feet can be bent when dry with heat , especially on a standing bird held down with hot glue .. Messy stuff but works great ... I try to do a few sets of feet at a time ...
@wrknhonks
@wrknhonks 4 жыл бұрын
Also ,you can't paint the feet till the skin is dry ... Paint will crack ..wait until completely dry
@christinamargarita5032
@christinamargarita5032 4 жыл бұрын
@@wrknhonks how long do you wait to paint?
@wrknhonks
@wrknhonks 4 жыл бұрын
@@christinamargarita5032 I wait till they're sold and webs are dry ... Depends on the time of year as to how fast they dry , summer about a week ... Winter 2 to 3 weeks ... I've put them in the oven to help speed up the dry time and it works but it's sketchy and if you used electrical tape it will melt and make a mess ...
@wrknhonks
@wrknhonks 4 жыл бұрын
This stuff works great , its about the best you'll find for quick setting ... My only issue is that I'm messy not on purpose , just have a lot of Bad Luck so if your messy when you work in your shop be prepared for a mess .. Make sure you tye off the joint so the MB dosent squirt out the top and make a real mess .... It's best to remove the feet , inject , dry , and paint . I put them back on when I mount the bird .. I keep them wrapped in plastic while working on the mount till I'm finished so I don't mad the paint ... Wear rubber gloves with this stuff as it's hard to get off your skin ...
@blkrubber1
@blkrubber1 4 жыл бұрын
EXCELLENT video. is it mc mastersblend hard to hear it clearly.
@pricesoutdoors6179
@pricesoutdoors6179 3 жыл бұрын
On a turkey foot thats just going with a fan mount, can u just inject them or do u have to skin and wire them
@wrknhonks
@wrknhonks 2 жыл бұрын
like your MB is setting up a little fast , when you have to put a lot of pressure on the plunger and its not filling the foot , its because your fluid is thickening making it very hard to get through the tip .. Love this stuff but its a PITA and messy .. whatever you get it on .. it stays on .. again the best stuff there is but its a messy priject for me anyways .. thanks for the video
@agtano2811
@agtano2811 2 жыл бұрын
Where do you get the Artificial Feet?
@JGAndrade88
@JGAndrade88 3 жыл бұрын
Too many adds. Couldn’t even finish the video but it sounds interesting.
Learn Taxidermy: Custom Bobcat Table Mount Part 6
57:49
Matuska Taxidermy Supply Company
Рет қаралды 4,1 М.
Learn Taxidermy: Mounting a Blue Winged Teal with Cory Caruthers
1:00:32
Matuska Taxidermy Supply Company
Рет қаралды 16 М.
Bike Vs Tricycle Fast Challenge
00:43
Russo
Рет қаралды 74 МЛН
Angry Sigma Dog 🤣🤣 Aayush #momson #memes #funny #comedy
00:16
ASquare Crew
Рет қаралды 51 МЛН
АЗАРТНИК 4 |СЕЗОН 2 Серия
31:45
Inter Production
Рет қаралды 1,1 МЛН
Learn Taxidermy: Eye Setting
1:16:14
Matuska Taxidermy Supply Company
Рет қаралды 4,5 М.
Shane Smith's instructional guide on the basics of turkey taxidermy.
45:51
Rabid Bird Productions / workshops
Рет қаралды 76 М.
Learn Taxidermy: The Alaska Project
56:49
Matuska Taxidermy Supply Company
Рет қаралды 943
FINISHING a WHITETAIL Mount!
11:05
Second Life Taxidermy
Рет қаралды 4,2 М.
Shane Smith Flying Bird Tutorial SD
1:02:34
McKenzie Taxidermy Supply
Рет қаралды 128 М.
Painting a Artificial Pintail Foot - Bird Taxidermy Supplies
11:22
Rocky Mountain Materials
Рет қаралды 816
Duck Taxidermy Tips, Tricks and FAQ | DU Nation
16:13
Ducks Unlimited
Рет қаралды 22 М.
How to Build a Bird Habitat | Taxidermy Supply | Scenes-n-Nature®
11:54
Learn Taxidermy: Mounting A Flying Widgeon With Wildlife Illusion’s Sculptor, Cory Caruthers
2:15:44
Bike Vs Tricycle Fast Challenge
00:43
Russo
Рет қаралды 74 МЛН