Leathercraft patterns leather stamping tutorial modified Craftool stamp

Leathercraft patterns leather stamping tutorial modified Craftool stamp. Serpentine leather stamps make unique patterns for your custom leather craft projects. The piece I am putting this serpentine design on is a flank strap for a custom saddle that I am making. The Craftool I am using has been modified so it will fit in a narrow channel.
The marking on this leather stamping tool is CRAFTOOL USA D744400 which is slightly different from some of the others I have seen.
✅ Leather tooling, carving and stamping tools I like and use.
Craftool D444 Leather Stamp amzn.to/2Eo6FP8
Craftool B802 Beveler Tool for Beveling Leather amzn.to/2YZC3gd
Craftool B803 Next Size Bigger Beveler Tool for Beveling Leather amzn.to/2M1BoWj
Maul Master II Leather Stamping Maul amzn.to/2S569O3
Barry King Swivel Knife, 1/2-Inch Barrel amzn.to/2qrJdx1
Barry King Swivel Blade, Straight, 1/4-Inch amzn.to/38efxog
Springfield Leather Company 100pack of 3-1/4" Round Shapes amzn.to/2E7xHud
Affiliate disclaimer - Some of the above links maybe affiliate links, which may generate a sales commission for me. For example gear and leather tools, books, DVD's and videos listed above is in association with the Amazon affiliate program and I’m an amazon associate. Thank You Bruce
I just purchased some new Craftools for this video review and they look good and you can purchase them from Tandy Leather and use them the way they are and I think you will be happy with the results.
If you want to modify your own serpentine tools here are two numbers you will like the Craftool number D444 and D445.
Thanks for watching Leathercraft patterns leather stamping tutorial modified Craftool stamp. • Leathercraft patterns ...
Handbag Makeover with Fringe and Sterling Silver Concho • Refurbished Handbag ⭐...
Leatherworking - Saddle restoration before and after. • Leatherworking - Saddl...
Leather tooling basics tutorial for beginners with Craftools select leathercraft tools • Leather tooling basics...
Tooling and Carving Leather • Tooling and Carving Le...
6 Leather Tooling and Carving Tools for Beginners • 6 Leather Tooling and ...
Thanks a lot for sharing, subscribing, commenting, and thumbs up here at my KZbin Channel.
Bruce Cheaney Leathercraft #brucecheaneyleathercraft
LEATHER BURNING TUTORIAL FOR BEGINNERS - PYROGRAPHY ON LEATHER • LEATHER BURNING TUTORI...
⭐ Metal Working KZbin Videos by Bruce Cheaney
Metal Bending Tool • Metal Bending Tool ✅
Bushcraft Knife Making • Bushcraft Knife Making
Article and Video by Bruce Cheaney, Gainesville, Texas.
The Golden Ratio • The Golden Ratio ⭐ How...

[@donaldmiller3779]

Thank you, Bruce. That serpentine design is really cool. Thank you for demonstrating what that stamp can do. Appreciate your videos.

[@cheaneysaddles]

Glad you enjoyed it Thank You!

[@rbliven]

I recently purchased a starter kit from Tandy and am eager to begin learning this craft. This information is very helpful. Thanks!

[@WeTheArmed]

Very satisfying to watch such a craftsman!

[@CantrellLeatherGoods]

So cool looking. Love this effect. Thank you for making and sharing this video!

[@cheaneysaddles]

Thank You!

[@DeanO]

Always a pleasure to watch you work

[@cheaneysaddles]

+Dean O Thank You Dean O

[@lowcard1]

Thanks for your video's I watch a lot of them and learn even more.

[@cheaneysaddles]

Thank you very much for watching.

[@robertward553]

Very nice, thanks for the close up look.

[@cheaneysaddles]

Thanks for watching!

[@CraigDomingue]

Always a pleasure watching. Could you get a little closer to the mic or turn it up a bit? Can barely hear you talk.

[@horststrassner472]

Sehr schönes Design weiter so👏

[@GypsieT17]

Learning from a master at his work is amazing 👏 🙌 👌 😍

[@cheaneysaddles]

Thank You! Thank You!

[@Blues-man.]

Very very nice ! Thank you..

[@edwarnock4534]

great video!

[@AvionOrr]

Beautiful

[@danehanz]

thank you for this . I have wondered why they don't make one this size!

[@ninesticks]

WOW- i am gonna grind mine off too......this is outstanding...

[@cheaneysaddles]

+ninesticks I think you will like it...Thanks Bruce

[@dwhenryjr]

Love the pattern of the d447. Try a 3/4" wide groove, i prefer the look a bit more and its a little more forgiving with the spacing. Love all your videos

[@cheaneysaddles]

I will give it a try sometime...Thanks Bruce

[@josephharvey5601]

I love your videos and was wondering if you could make a video of making a saddle from start to finish, or a series.

[@cheaneysaddles]

+Joseph Harvey Here is a time lapse video of a custom made saddle I made kzbin.info/www/bejne/iKOYZ42Mh7Sho8k Bruce Cheaney #leathercraft

[@Yevgen6R]

thank you!

[@Playgun10]

Amazing! I would love to see a video about exactly how you case your leather. I just can't seem to get the color you do, but I am getting better!

[@beardedbowhunter6139]

I was thinking the same thing it is amazing how dark his tool marks are

[@nickhdeep6leatherworks338]

I agree a video on your way of casing leather, you always get the rich brown to come out.

[@ambershwab9303]

I wish you were my grandpa to teach me your cool ways or if my grandparents were alive they would be like you

[@cheaneysaddles]

Amber, Maybe my KZbin videos will help you fill the void...I wish you the best. You can do what ever you put your mind to do... Thanks Bruce

[@conleycustomironwork3227]

Cool great job / 1st

[@cheaneysaddles]

+Fish n guns Thank You...Bruce

[@Rebornmann]

Hi Bruce. I love your videos. I just subscribed to you. I have a question I hope you can answer. how did you make the grooved end? I know how you did the lines but the rounded ends elude me. Thank you.

[@cheaneysaddles]

I am using a Craftool USA tool marked with the number D744400 I modified this tool to suit my needs by reshaping one end of the tool. I recently purchased a new Craftool with the number D444S and it looks very similar to my tool but it needs to be modified by reshaping the end also. Also another factor is the spacing that gives the rounded end effect. Thanks for watching my videos. Bruce

[@Rebornmann]

Thanks Bruce. I appreciate you answering my question. I am curious. Have you ever attempted to make any type of leather armor?

[@cheaneysaddles]

No I have not

[@daliborklusacek2095]

good day to everyone, can anyone advise me how far apart should be the lines when using the D447S punch? thank you for your reply. Dalibor

[@cheaneysaddles]

Try 3/8" and experiment with the spacing on a scrap piece of leather.

[@marioaccardo7217]

nice tutorial video, thanks! I have these tools, necessary to be able to do this type of leather work ... so with pleasure I will follow your video tutorials and I signed up and hit the bell ... thank you very much and I hope I'm up to doing these craft works ... I create textures, designs, seams and more on vegetable cowhide and I use goatskin or handmade raw leather ... raw leather which I then make strips, tientos, of 2 mm 3 mm 4 mm .. .and i want to learn this craft of leather engraving...so i can do great handicrafts...thanks again so much and congratulations. Best regards.

[@cheaneysaddles]

Thank you for your comment and have fun with your leather working.

[@andynuno4036]

Does the leather need to be damp in order to get deep designs with the tools?

[@cheaneysaddles]

Yes the leather needs to be wet but not to wet just damp through and through. If the leather is to wet when you stamp your design some of the crispness will pull out after the piece dries.

[@manolim60mtp]

el maestro nos ebseñafa a hacerlo tan bien que nos haremos los mejores cinturones para nuestros pamtalones....

[@jeffroberts4788]

did i miss where you laid your lines out how wide they are apart?

[@cheaneysaddles]

A 3/8" channel works good with this tool.

[@TheNoobstalker]

Hi Bruce, What is the barrel size and blade size you like the most. I am looking to buy a Barry King Swivel Knife. Thank you

[@cheaneysaddles]

+Mr. Tom 1/2" barrel 1/4" blade straight...

[@TheNoobstalker]

+Bruce Cheaney Thank you Bruce.

[@TheNoobstalker]

+Bruce Cheaney does a "thin" or "thick" blade matter much? I assume the thin blade is better for detailed work.

[@cheaneysaddles]

+Mr. Tom The thin one...

[@TheNoobstalker]

+Bruce Cheaney Thank you Bruce for all you do!

[@11h5p4]

Mr Cheaney. How do you case your leather? Thanks

[@cheaneysaddles]

Here is a link to one of my leather casing videos kzbin.info/www/bejne/qpimp4WgqZWCm5I

[@chancerichards5033]

how thick was that leather?

[@cheaneysaddles]

+Chance Richards 13/15 ounce saddle skirting

[@conleycustomironwork3227]

Where do you get your leather

[@cheaneysaddles]

+Fish n guns Tandy Leather and American Leather Direct... Thanks for asking Bruce #leathercraft

[@louisemissouri4410]

Not sure what happened but could barely hear you on this video. Great demonstration tho. Hope all are well in your world. :D ATB Louise :)

[@cheaneysaddles]

+Louise Florida /Missouri Louise, This was more of a show and tell...I know the audio was a lot low..This was just turn the camera on and go production....Thanks and Good to hear from you. Bruce

[@BillyBlaze7]

how are you getting such a dark burnish from your tool?

[@cheaneysaddles]

The leather is fairly thick 13/15 ounce and is vegetable tanned saddle skirting which results the dark stamping.

[@BillyBlaze7]

@@cheaneysaddles Thanks for the answer, I was curious because I never get that result from any stamping I do. It looked so buttery smooth and like it stamped so easy and the burnish is gorgeous

[@heinzschoch6964]

which number does the stamp have

[@cheaneysaddles]

The marking on this leather stamping tool is CRAFTOOL USA D744400 which is slightly different from some of the others I have seen.

[@sarahwatkins606]

I love your videos but there super hard to HEAR you!😥

[@alvarogeraldo3897]

Do not you need to get wet?

[@cheaneysaddles]

Yes the leather needs to be slightly wet in order to receive a good deep impression.

[@alvarogeraldo3897]

I'm from Brazil, I'm learning, I do not know anything

[@cheaneysaddles]

Just have patience you will learn quickly.

[@alvarogeraldo3897]

Bruce Cheaney God willing, do you have WhatsApp?

[@rgamore]

You need to speak into the mic, sounds like you are down the hall in a tunnel.... :(

[@cheaneysaddles]

Thanks for watching!