Lectric ONE Bike Front Suspension Fork: Easy Peasy or Total Headache?

[@michaelmainelli6349]

Gary, great video as always. Any rumblings from Lectric about this mod being added in an upgrade to the One in 2025. I really like this bike but the lack of front suspension is a deal breaker for me. Definitely beyond my capabilities to self perform. lol😂😂 One year anniversary of this bike would be late fall. That would be nice. Thx for all you do!

[@ebikenation]

Good 2:00 Video Gary! I like how your garage looks now.

[@Thomas-po3by]

Hey Gary, the truth was I was trying to complement you on your video accomplishments by Insinuating you had a bike shop. That being said you are an asset to the U Tube community and you produce excellent content!! Tc from Nevada

[@GarysE-BikeAdventures]

@@Thomas-po3by thank you I’m trying very nice to hear ❤️

[@pedrofernandez8729]

Is there no limit to this man's talents? Bro, you gotta become an engineering consultant to these ebike companies

[@GarysE-BikeAdventures]

@@pedrofernandez8729 thank my friend, hope all is good for you

[@Twissted998]

Great video sir and thank you for the awesome content. I'm getting the parts together to do mine as well.

[@GarysE-BikeAdventures]

@@Twissted998 this is a link to the fork that I used amzn.to/3VPpRgW

[@DougBlunt]

Gary please keep on doing these self help videos they are really good. Your studio looks better I see it

[@GarysE-BikeAdventures]

@@DougBlunt i’ll keep trying Doug. I do have to put another battery set up on the Wired bike but it should be easier as Electric AllWheel supplied the plug & play wires and battery balancer Matt’s a great guy sent me a huge box of his company’s accessories to show you guys

[@quintonhudson6490]

Great video fantastic work I wish I could have a bike done by Gary's customs.😅

[@GarysE-BikeAdventures]

@@quintonhudson6490 thanks we may end up retiring in Virginia so I’ll be closer 😁

[@terryrccrazy6993]

Great information, thanks

[@GarysE-BikeAdventures]

@@terryrccrazy6993 your welcome Terry and Thank you for watching

[@IMBruceECLECTIC]

Great job!

[@WyomingRider]

Excellent job Gary! BMX bars are always better in my opinion!

[@Mrhyperelectric]

Gary great review again I appreciate i’m about your arrangement myself and I love these bikes and I’ve ridden motorcycles my whole life from motocross bikes to Harley‘s and still ride a dirtbike. But the Z bikes are really fun anyway I have a question for you on the write up one rev one I watched your install on the door battery and the basket I would like to know what battery that was if you could please let me know I appreciate it. I tried using the one that comes with the rev one for Black Friday. They had a good deal so I bought the second battery with the blender itself, but it does not want to fit in the basket! No matter which way you put the battery power strip I tried facing the back like you did then try facing the front won’t work with the stock battery. I raised it up with six washes. If you could let me know which one you is good I appreciate it.. You probably know I see somebody’s power strips like a 30 away almost halfway down the strip is the pin connector. Those kind of batteries basically go straight down and then slide forward. I’m not sure on that because I don’t have a bike with that, but I know you’ve have many bikes and have worked on mini bikes. If you could let me know that too most probably I’ll just buy the battery that you got 30 amp hours and you can’t beat it just might be a little pricey. I don’t know. Let me know if any kind of code for the battery would help me out also thank you my man keep up the informative videos.😊👍👌

[@GarysE-BikeAdventures]

@@Mrhyperelectric hi Robert so you’re saying you have the factory battery that they sold for that bike because I know people that have put that in the cage, you have to shim it up from the bottom cause if you put it directly on the bottom, it will not fit let me know

[@JesseDehart-y8x]

Make a video to show how to take off the back rim and put it back on.

[@Thomas-po3by]

Hey Gary thanks so much, I asked for just this video, unfortunately I think this modification is still over my head. Tell me where your bike shop is, I’d love to be a customer!!! Love the handle bars. Tc from Nevada

[@GarysE-BikeAdventures]

@@Thomas-po3by I actually don’t have a bike shop. I have a full-time job. I do this on the side and enjoy it very much if you lived around here or fix your bike for free I’m up in New Hampshire.

[@ChrisCrossed]

Good mod

[@GarysE-BikeAdventures]

@@ChrisCrossed thanks Chris told you I wasn’t gonna lose the fender and the headlight

[@ChrisCrossed]

@ I’d be curious to see a close up o f the bracket

[@tenncutt]

You need a DavidBrandNew Turtle neck stem. Lose that giraffe stem! I'm sure you have heard of him on KZbin. He has a very nice setup with bmx bars

[@GarysE-BikeAdventures]

@@tenncutt I have met him and he would like to send me a setup and I have one on another bike. Thanks for watching ❤️

[@JesseDehart-y8x]

Jesus is king

[@craig_runs]

I'm sorry Gary, I love your channel but you took a beautiful bike and made it so ugly. Those bars and forks ruined the whole look of that bike.

[@GarysE-BikeAdventures]

@@craig_runs to each his own, the bars on it are definitely beneficial to people who want to share it. But I cannot stand that giraffe bar look. But I respect your opinion. Thanks for watching. 👍❤️

[@craig_runs]

​@@GarysE-BikeAdventuresmy one will be delivered on the 9th. I already have a 30ah battery to add with a balancer. I will be using it to commute to work. 44 mile round trip.

[@IMBruceECLECTIC]

Great skills! 🦵⚡️🚴‍♂️💪🔩⚙️🔧

[@GarysE-BikeAdventures]

@@IMBruceECLECTIC thanks Bruce

[@IMBruceECLECTIC]

@@GarysE-BikeAdventures ....you are so lucky I don't live near you....I would be asking you to do stuff for me all of the time.... ha ha ha

[@GarysE-BikeAdventures]

@ I wouldn’t mind at all Bruce

[@IMBruceECLECTIC]

@@GarysE-BikeAdventures ....I know...you are a good man! I am proud to call you a Brother...a Friend!!

[@JesseDehart-y8x]

Make a video to show how to take off the back rim and put it back on.