Lectric Service Center | Default Settings

Wondering how to adjust your eBike's default settings? This video will walk you through how to make adjustments, and what function each default setting controls. Check it out!

[@crazyjeeper67]

Now how do we remember which page we want to be at. It would be alot easier with a quick reference guide.

[@MatthewMannhardt]

files.helpdocs.io/djeddasp2e/other/1708379670987/3-0-manual-hydraulic-1.pdf

[@Malachithe90d]

Can we get a updated video explaining P22? Set to 1 you have access to full throttle in all PAL is that correct

[@Tukuklan]

Help! Mine is stuck in class 3 throttle but class 2 speed lmto 20mph and I change it from 32 to 100 and won’t go to 28mph it will stay at 20mph no matter what number p08 is in.

[@donscott8577]

This was helpful but I'm wondering why this information wasn't included in the owner's manual

[@LectriceBikes]

Hey Don! We're stoked that our video was helpful. Our manual is only to go over the safety and guidelines of our product. All of our installation instructions can be found in our KZbin or by giving us a call at 602.715.0907 M - F from 9am to 5pm MST. ⚡

[@VinnyAndSweetPea]

I wish this video explained each setting in more detail.

[@farrukhighlander6047]

I recently bought new control panel M5 with control button from Amazon for lectric. I noticed throttle works, but pedal assistant is not working. Is going to P10 and putting it on 002 will fix it?

[@mmbo1378]

Very helpful 👐

[@LectriceBikes]

We're stoked this video was useful. Let us know if you come across any questions. 🥳

[@DarkroomZombie]

Thank you for sharing

[@LectriceBikes]

Of course!

[@rxolt1]

When I am in mode 1 my bike only goes 8.9 or less. how can I get the full 10 mph? Also only 13.5 to 13.9 in (2).

[@LilFrisk3232]

My XP Lite will not change out of class 2. Is this a restriction since it's a cheaper model

[@rxolt1]

Hello, I have an EXPEAK version bike. Less then 100 miles. Today we went to leave and auto assist when pedaling would not work in any zone. 1,2,3,4 etc. It works with the thumb switch but not auto pedal. I further found that it will work if thumb switch is used 1st time. If you apply brakes, it no longer works unless again I use thumb switch. Update: problem is only when using rear brake. Anyone else have this issue? I've emailed customer support, waiting on reply.

[@corycrawford4524]

How to I adjust my headlight strength? I got an elite headlight and it's super dim but plugged into my grandmas trike it's suuuper bright

[@corycrawford4524]

Just found out its not compatible with the Xpremium

[@davidwollmer8694]

Can you do a video on your new controller and settings please on the 3.0

[@BruceNaszimento]

How do I get an owners Manuel? For my bike and can I leave the battery in the bike when I recharge it or should I take it out when I charge it?

[@kathrynkondrad3170]

You can leave the batteries in the bike. Either or will work...

[@subiesojourner777]

If you change the bike from a Class 2 to a Class 3 will that wear the hub motor out quicker?

[@KaushikThakkar]

Same question

[@LectriceBikes]

No, it should not wear the motor down quicker.

[@lillweez99]

No but drains battery faster that's it, class 3 just unlocks more speed and power usage that's it.

[@LectriceBikes]

This is correct, the trade-off is having more speed but less range! For riders who have shorter commutes/access to charging, this may be the ideal option.

[@ryhu4755]

My charger stays green when plugged into the bike. I wasn't sure if it was charging or not but I realized that it didn't charge after taking it out the following day. I read that it might be a voltage issue or something and I was wondering if this is common. I have about 50 miles on the bike and really enjoy it during my commute in the city. I am worried that it won't charge now and the battery could be damaged as a result.

[@LectriceBikes]

Hey there, we're sorry to learn about this. Thank you for making us aware! To determined if it's a battery issue, we would need to further troubleshoot with you. We ask you please call or text us at 602.715.0907 M - F from 9am to 5pm MST and our team will take care of you. We look forward to your call/text.

[@peggybaird5241]

I have zero miles on this bike and it isn’t working!

[@nighter7881]

How do I set it back to class 2 😩 it won’t let me pedal soft and start motor so basically I’m pushing hard and it’s only throttle now

[@LectriceBikes]

Hey there! Please give our team a call at 602.715.0907 M - F from 9am to 5pm MST and they will be happy to walk you through the changes. Thank you!

[@rjacj]

I'd like to change my tire size on a Lectric XP 1.0 for a more accurate odometer reading, as it's off by 20%. Is this a locked setting? I have tried multiple times and it will not change.

[@LectriceBikes]

Hey there! Even though the wheel is 20 inches in diameter, in order for the speedometer and odometer to get an accurate reading the computer needs to think the wheel is 22 inches instead. This setting is locked and can not be unlocked! We do apologies for the inconvenience. ⚡️

[@grenwood53]

​@LectriceBikes If it needs to be at 22 then why did you say default is 20? Are their any other weird situations like this where yhe proper setting isn't the default? I have an xp3.0 long range and tried changing everything to as close to the defaults as possible. This included changing tire size from 22 to 20 and now back to 22. Can you please post a list of all the proper settings for the 3.0 long range and Also what settings to avoid of you don't want to break your bike?

[@jon-_-843]

I noticed my XP 3.0 had a couple of different locked modes and was was wondering if this was normal?

[@LectriceBikes]

Hi Jonathan! There are 10 settings that are locked. 🙌🏼

[@JesseDehart-ou8hp]

Nice

[@SuperLaOfficial]

Does this apply to Lectric XPremium?

[@jeremiahstewart6588]

Will this work for a euy e bike?

[@LectriceBikes]

Hey there, this video is to help with Lectric eBikes only. We recommend reaching out to Euy Bikes for assistance.

[@riseabove3133]

Is there a way to reset all settings back to factory default?

[@LectriceBikes]

No, there is no way to set your eBike's settings back to default with one push. Each setting (P code) has to be reset/changed individually!

[@riseabove3133]

@@LectriceBikes OK. Thank you for the quick reply 👍🏼

[@LectriceBikes]

Of course, have a great day!

[@eugenepaiksr6865]

exactly how many locked (&therefore unchangeable) settings do users\customers (not programmers\ manufacturers) need?

[@LectriceBikes]

Hi there, each display comes with about 25 settings total, with about half of them unlocked. You can learn more about the settings in your user manual!

[@ibinhakimhassan8581]

I'm still having problems

[@CARandDRONE]

Is there a setting to govern the speed

[@LectriceBikes]

Hi there! The PAS MPH are pre set at our manufacturer and can not be changed/modified. Thank you for your understanding. ⚡️

[@pauloespinoza7680]

What is the PSI for tires???

[@LectriceBikes]

Hey there! We recommend going off of the tire wall on your eBike as this will advise the correct PSI needed. ⚡️

[@harlanestes1482]

I have barely even rode my bike yet, the display comes on for half a second and goes off. I waited all night and try it again in the morning and actually it stayed on I rode for about five blocks and it died. And now it's doing that again just comes out for half a second and turns off. If anyone knows with a fix for this please let me know. Thanks

[@LectriceBikes]

Hey Harian! We’re sorry to learn that you’re currently experiencing an issue with your eBike and thank you for making us aware. To assure we can get this taken cared of in a timely manner, please contact our Customer Service team at 602.715.0907 M - F from 9am to 5pm MST or email us at [e-mail] with the current issue and a representative will work with you to get this resolved! We look forward to getting you back on the road.

[@burn1gotbeats]

Hey I would love to install a smaller display screen do you guys have any recommendations for the Lectric lite ?

[@LectriceBikes]

Hello there, we do not have any recommendations besides the default display that comes standard with each of our eBikes! We apologize for the inconvenience.

[@burn1gotbeats]

@@LectriceBikes thanks for the reply.😇😎

[@LectriceBikes]

Of course!

[@elite4916]

Just got my bike and it only goes 16mph brand 3.0 Just got it 2days ago someone help me please because there supposed to go 20mph

[@LectriceBikes]

HI Elite! We'd love to further communicate with you. Please give us a call at 602.715.0907 M - F from 9am to 5pm MST. Thank you! ⚡️

[@jonnysokkoatduckdotcom]

Its to far away and at not a good angle please help

[@Nyhiak]

Talk slower .

[@peggybaird5241]

I didn’t receive an owner’s manual. I’m an old lady. I’ve charged the battery at least 7 hours. The display panel was working Saturday when I got it. It’s not working now. I need this for my business and I’ve watched dozens of KZbin videos. It says to turn the key counter clockwise to start but it only goes clockwise. The customer service will put me on hold for an hour. I’ve sent multiple emails. I don’t know how to check a voltage regulator to send a video. I bought this to use for my business but it’s just sitting like a piece of junk because I can’t ride it. I’m out in the country in a small town with no other means of transportation. It looks like a made a horrible mistake buying this bike!

[@timconners2076]

Did u figure out your issue

[@debbietjerrild9094]

He speaks too fast.

[@debbietjerrild9094]

I did not receive a manual. Is this information in the manual.

[@LectriceBikes]

Hi there, we would suggest using Closed Captioning as well as decreasing the playback speed of the video to 0.75 or even 0.5! This information is in the User manual, which can be accessed and downloaded here: help.lectricebikes.com/article/lzlpwtbyer-lectric-user-manuals

[@debbietjerrild9094]

If I only knew HOW to decrease the speed of the video. I'll try the CC idea. Thanks

[@TheRealJaydenJohnson]

classic debbie