LED dashboard light installation 1998 Toyota Tacoma

[@robertlabastida7332]

Clear, concise, and no fluff.....thank you.

[@yipeekaiye]

Thanks for this, man. At 3:50, when reassembling it seems like the vent connections can get disconnected so it’s good to make sure they’re both together before you screw the first few covers back on.

[@SuperGooberIA]

Paul, Thank You SO MUCH!!!! I have been trying to replace these dash lights for years. I’d make a little progress and then end up putting everything back together. After a few times of doing this I got pretty discouraged and haven’t tried since. I watched your FANTASTIC tutorial and NOW I’m finally confident that I can get this done. You Rock!!!! Best Regards, Jeff Goodson

[@MAO9878]

Great video👍👍👍 I replaced the bulbs in mine and made a big difference. Just a little bit harder, due to the fact I have a automatic. Just had to move the shifter a few time to get the dash out and in. Video was a big help.

[@irregularmana6216]

My light adjustor nob connector was almost impossible to take out. I didn't want to rip it out and the plastic is pretty old so I had to be careful. The cluster was hard to take out because my taco has a the shifter located on the steering wheel since it's an automatic. It took me 1 extra hour to do this job but by God I did it and now I have a blue color to my lights. It's worth it lol

[@LabCoatPaul]

Good job! One of my favorite dashboard tools is a plastic pry bar.

[@kainoa003]

Best video I’ve seen yet, easy step by step detail with arrows, don’t have to look anywhere else, perfect video, thank you very much

[@RMMR-po5xb]

This is the best video well explained perfect images of where the screws are located and perfect description of the led light bulb you are going to need. 👍🏻👍🏻

[@LabCoatPaul]

Thanks! I try to make it as useful as possible.

[@bpspets]

I love the step by step and showing where everything is. Thank you!

[@1slowmugen]

Seen 4 Videos about this and gotta say this is the best one! To the point and also well explained! Thanks now I can do my dads truck

[@morphius747]

that radio trim is the rarest thing on earth

[@manasseh7]

Gotta be one of the best tutorial videos ever

[@LabCoatPaul]

Thanks!

[@rmatt53]

Love your videos. Also I see the headlights are a bit yellowed in the front I just used a Sylvania headlight restore kit on my 03 Camry and it made them look good as new. Great restoration product.

[@sunshineupgrades]

This is amazing for us visual learners! Keep it up!

[@WR_CTorch]

Incredibly helpful. Thank you VERY much!

[@ConnorLee]

You sir, are a legend. Thank you for the perfect video.

[@georgemanteaw]

I put some of this lights in my 1999 western star, my goodness what a difference. Very bright lights.

[@maurolima_]

You save my life ❤!

[@Crayon515]

Hey!!! He’s back!!!! Just bought a clean 2dr rav4 and I love it! Good stuff!

[@joshuatario7752]

Can you do a video changing the light from the ash tray and the storage compartment on the right

[@rodendeguzman5011]

very easy walkthrough step by step🙌🏽

[@hagaloustedmismo536]

Nice job i have 1999 tacoma i like this led

[@naikki]

Hopefully RAV4 video will come out soon!

[@arttorreshopro]

Este es el mejor video en KZbin!

[@RealSteelStreet]

I just did the same upgrade but used white LEDs behind the gauges and they’re 🤌🏼

[@warthhoh]

Awesome how to video 👍

[@josephdoroshchak6676]

Thank you, really helped me out😮‍💨!

[@swato547]

thank you! very well made vid

[@MrXavi77]

Wow awesome video thanks u sir!

[@edmora7662]

Outstanding video.

[@LabCoatPaul]

Thanks!

[@dominik8371]

Why it's peeping when you were testing on dashboard the lights?

[@jedrocero]

Great video, thank you!! By the way do you still have the part # for that AC Heater control panel/bezel? Thanks in advance.

[@chrisjennings1204]

is there anyway to take the glass off the dash cover for cleaning?

[@LabCoatPaul]

It's plastic, not glass. The instrument cluster is sealed, so there shouldn't be any dirt inside it. If you need to clean it, remove the gauges from the truck, and the cover is held on with a few screws.

[@Agus.randoms]

Thanks for the links

[@witekboro5479]

Good job ❤❤❤

[@fastlaneization]

Thank you

[@alejandromc3]

"Passenger airbag" light can be replaced too?

[@anemic4807]

will those dashboard LEDs fit in the slots for the gear indicators/warning lights etc? the D light on my 98 tacoma is out and I want to just make the whole dash LED

[@LabCoatPaul]

I haven't replaced them, so I don't know for sure. My guess is they'll be the smaller T5 size. I don't recommend using LED for indicator lights because the indicators will all be the wrong color.

[@Soiceylukky]

thank u

[@HurricanesZ]

Those bulbs fit a 96 tacoma also?

[@thienngo9858]

You are so great 6:09

[@HS24833]

Do I need to disconnect battery?

[@MAO9878]

I didn't and everything worked out fine.

[@pradolover]

5VZ engine?

[@matiaslizama5035]

what did you press to turn the lights off and on at 3:19

[@jimrossabrena7955]

Probably the headlights on and off toggle on the stalk lever

[@californiabarbertips]

👌

[@sergeysergeev8647]

Когда будет про RAV4 видео?

[@LabCoatPaul]

I'm taking a break from the RAV4 and finishing a few other projects. I should get back to the RAV4 by the end of the year.

[@johnmarquez3807]

When did you get a tacoma?

[@LabCoatPaul]

It's my friend's Tacoma. It''s a nice little truck.

[@Jmoney-db4rp]

NICE VIDEO AND STRAIGHT TO IT. THATS WHY I WILL SUBSCRIBE. But i have a 2001 Tacoma and mines are orange and i like them so i wont be changing mines.

[@portsac]

Thank you

[@Agus.randoms]

❤