LED Firework build

How I built my own LED firework using pebble lights.
STRUCTURE
• Porcupine ball- Amazon a.co/d/ep7WGut
• Spokes (tomato cages from local hardware store were used in this video)
• ½ PVC pipe- cut to 2.5” sections- from local hardware store
• ½ PVC pipe caps- from local hardware store
• Some method for the base. I’m using an umbrella stand with a ½ metal conduit running inside a 2” metal conduit.
• Zip ties
• Liquid nails or hot glue
WIRE COMPONENTS
• LED pixels. I used seed, or pebble LEDs. You can use strips or nodes, but I prefer the pebbles because they are cheap and easy to work with. I chose 12v from this site pixelparadiseusa.com/product/... , but they can be ordered anywhere. Make sure you order WS2811 addressable lights. I also was careful to select pebbles that could be cut anywhere within the string. Some pebbles can only be cut at every 3rd string.
• 3 conductor electrical wire- Amazon a.co/d/fZIb3fN
• 3 wire quick-connect (optional)- Amazon a.co/d/exurDTT
• Solder sleeves- www.wiredwatts.com/stred-red-...
ADDITIONAL COMPONENTS TO MAKE IT WORK (NOT SHOWN)
• X-connect pigtails- Amazon, Wired Watts, Your Pixel Store, etc.
• Dig-Quad LED Controller- www.drzzs.com/shop/digquad/
• 12v Power supply- www.wiredwatts.com/ps12v350wm
• WLED software (download free) kno.wled.ge/

[@fredrickbrown1963]

Thank you so much. I was able to steal many of your ideas, and I wasn’t sure how I was going to do what I want to do, but your video gave me many ideas; so again, thank you very much, and great job.

[@therickmarcus]

Amazon 24" yard sticks spray painted. But your rods are super thin. LOVE IT!!

[@manukalias]

very impressive DIY Project 😍😍

[@alexgutierrez5123]

That was brilliant, thanks sharing.

[@user-hf7cg5bx2w]

Would it be possible to get your Wled setup.? Great video

[@andrewm1967]

can I get some more info on the wiring of the groups ? are they in series or parallel?

[@newmexicojoe]

I can't say for sure, but at 13:27 it says "WLED only recognizes one spoke since they are all wired together. Total LEDs to input is 23" To me, this means 25 strips of 23 LEDs wired in parallel.

[@papabrose]

Are these 5v or 12v?