LED Fog lights with DRLs Install & Review - 2017 RAM - Amazon Special!

[@RaymondLamb]

Link to Sealight LED bulb upgrade - kzbin.info/www/bejne/pquYYYZ6iN-ojLs

[@nkf_gh]

I did this upgrade like 2 years ago. The lights are still working fine.

[@RaymondLamb]

That's good to hear. I really like them and hope they hold up for a while still. Mine are still doing just fine!

[@shamar_166]

Nice video man. Installing mine tomorrow

[@RaymondLamb]

Thanks! Hope all goes well, thanks for watching.

[@shamar_166]

@@RaymondLamb Yessir it went very well and I did the same thing as you by leaving the top bolts out to get a better angle of the upper light bar. Looks amazing I must say! Thanks again!

[@RaymondLamb]

@shamar_166 that's great, glad you like them too and went well!

[@mark1756]

Morimotos would go well with that drl foglight . Thats my plans for my blue ram. Great video!!!

[@RaymondLamb]

I agree, but they think very highly of them with that price tag lol. If I had the standard lights I'd definitely do it, but since I have the projectors, I'll probably stick with them. Thanks for watching, good luck with yours.

[@mark1756]

​@RaymondLamb thanks bro!!

[@dtaposse8858]

Beautiful truck sir

[@RaymondLamb]

Really appreciate it! Thank you.

[@martincamacho2559]

Is it possible to splice into your parking light cable with your DRL?

[@RaymondLamb]

I'm sure it would be with no issue. I wanted to make sure mine were on all the time so I went this route. But don't see why not.

[@Wootangtw]

Shoot yeah that looks good I think I’m going to buy some for my Ram…

[@RaymondLamb]

Thanks, they are still holding up great! Thanks for watching.

[@salem4514]

I bought the same ones, great fog lights but the aligns was off, even when you lined up the tabs perfectly the top of the fog light was too high. I ended up swapping the mounting brackets with my factory ones and they lined up perfectly with all 3 bolts.

[@RaymondLamb]

That's a good idea, I didn't think about that. So far I haven't had any issues with them moving or vibrating, so I'm happy about that. They are still doing great and very bright.

[@ClaytonFleming-f4j]

Hey not sure if anyone else tried this but, I had the same issue with the holes not lining up on the light bracket so I actually just removed the bracket from my Amazon ones and put the oem ones on and it fit perfect

[@RaymondLamb]

Thanks for the info, I wish I had tried or thought about that too. Thankfully mine are still hanging in there with no issues or vibrating. Thanks for watching!

[@rotwiler7674]

I have those, but the plastic housing thst bolts up cracked, I zip tied it, cracked in another place, so jiggles around. Seen ones on Amz now that say upgraded, but don't know what was upgraded.

[@RaymondLamb]

Oh no, that sucks. So far mine are holding up, not certain if I got an "upgraded" pair or not or how recent that was released. Hate that yours cracked, I saw a comment on here that someone took the light out of the bracket and put it in the stock bracket. Thought that was a good idea, but I had already thrown mine away.

[@dirkdig3628]

Did you get any bulb out message or issues with the fog lights flickering?

[@RaymondLamb]

Nothing at all so far, everything has been working perfect!

[@walterbwd]

Couldn't you just plug the wire with the fuse on it into any open fuse slot and just make sure the lights stay on when you want?

[@RaymondLamb]

You could definitely try other fuse slots. Problem is a lot of them have power all the time so the DRL would stay on all the time, not just went it was switched on or running. But you could look for another one that works for you, thanks for watching!

[@SchroetterDA24]

Did you upgrade your low beams and if so with what?

[@RaymondLamb]

I did, I'm almost done with that video as well. If you want to check back or subscribe so you'll know when I post it. The short answer is, I upgraded the low and high beams with LED bulbs, found here www.amazon.com/dp/B079KB8J98?psc=1&ref=ppx_yo2ov_dt_b_product_details They worked great, and really light up the night! Because mine has the Sport projector style lights, it takes four of the 9005 style bulbs. I'll have that video finished soon if you want to check it out. Thanks!

[@AMOffRoad]

Hi, I like your content. I'm Elsa from Amoffroad. Do you accept sponsored product?

[@RaymondLamb]

Thank you, feel free to contact me at the email in my profile, I'd be more than happy to talk with you!

[@AMOffRoad]

@@RaymondLamb Hi, have sent you an email.

[@TheDenis675]

Fuse #79

[@dimensionexo.]

Try a washer *