Excellent, easy-to-follow video! Could you please provide a link to the light fixture and frame that you used?
@its_grimy84422 жыл бұрын
Did your frame come with the panel? Or do you know what I could get the frames?
@cameronprice Жыл бұрын
An excellent tutorial to help refresh my own technique. Pre-COVID I installed several identical units in my basement and although purchased, the last surface mount LED got delayed. Your video not only confirmed my memory, the cardboard template and electrical tips made my final install much easier. Since this was in my basement, over a large TV, I actually played this video while following your own install.
@willscurran Жыл бұрын
I like your tutorials - very clear and easy to follow. I just got some LED panels from pqlighting and realized they were a bit more complicated to install in my home than expected. Happy I found your guide! Unfortunately I already bought dimmers before seeing your tutorial, not realizing they are for commercial wiring.
@ChristiMeyn-yy3gr2 ай бұрын
Thank you for this video! Incredibly helpful and you made it possible to get this project completed in an afternoon!
@BenJohnsonDotNetАй бұрын
Excellent presentation
@josephcimino42032 ай бұрын
My installation is a drop in panel. I have six bulb garage insulation and I’m desiring to install 12 drop in led lights. I’d like to use pigtails and I’m wondering if I could daisy chain from one fissure to another just picking up power at the end of the run? Am I setting myself up for a problem?
@menachemfischer5957 Жыл бұрын
Nice video! Very clear instructions.
@fsj19781124 күн бұрын
very nice, thanks for sharing.
@blackyslash Жыл бұрын
This might be a stupid question but , If the ground cable (green cable ) is not well connected to the ground (solid) cable , can compromise the LED lights?
@karunathilakaabeysekara8642 Жыл бұрын
Thank you
@tbc2102 жыл бұрын
Thanks for your video, this is great. I would like to install 3 LED light panels on a ceiling above a drop ceiling and was hoping there would be a way to wire them in series so I only had to wire the last one to the ceiling box. But I haven’t seen any panels for sale that advertise this feature. Is this anything you’ve come across? Thanks again, this was an excellent tutorial.
@GeorgeConlow Жыл бұрын
Did you find one?? I’m having same issue.
@GothamCenobites11 ай бұрын
Where did you get your panel? Did they have black frames?
@bradjohnson55202 ай бұрын
Thank you, great presentation!
@Applejba2 жыл бұрын
Hi - thanks for the video! I am replacing a number of florescent lights in my 3 car garage. Will the existing wiring (black and white) work with this type of light?
@ToolboxDIY2 жыл бұрын
Yes existing wires will work. The driver has connectors for neutral and hot. Also inside the driver will be a pigtail wire for ground.
@philiphernandez10866 ай бұрын
Is there way to manualy dim these without a dimmer?
@danshearer2689 Жыл бұрын
Thanks wasn't sure how or what to do at the junction box
@brandonpetrilla1731 Жыл бұрын
Quick question what’s the mounting procedure for a drop ceiling? will the led panel just sit like the original fluorescent fixture did?
@joewarrick604311 ай бұрын
Slide the panel in at a 45 degree angle then bend the tabs on the back of the fixture out 180 degrees so they rest on the framing of the drop ceiling
@chronikss Жыл бұрын
“Took a lot of research, and I finally figured it out” What was so hard and mysterious about the wiring? Did I miss something? Appreciate the video!
@ToolboxDIY Жыл бұрын
There's very little documentation out there on these type of fixtures so I had two things to figure out 1) how to safely (i.e. within code) make my splices inside the existing junction box (and make sure they stay there 2) how to wire a long enough pigtail wire going from the panel junction box to to the ceiling junction box. My primary concern with all of this was how to do in a code compliant way. I couldn't even get the LED panel distributor to explain it! It seems most of the applications are using suspended ceilings with armored cable.
@leoread81852 жыл бұрын
Thanks a lot for making the installation video easy to understand and follow.
@ToolboxDIY2 жыл бұрын
You are welcome!
@devotedanaheim1575 Жыл бұрын
@@ToolboxDIYwhat if my led ones has a green ground wire coming in ?
@seano34322 жыл бұрын
Thanks for this- I have 8 of these to do this week. You saved my a**
@ToolboxDIY2 жыл бұрын
Glad I could help!
@ridefitnation Жыл бұрын
Excellent video
@ToolboxDIY Жыл бұрын
Thank you very much!
@frijoli9579 Жыл бұрын
What lights did you use?
@thehawk82952 жыл бұрын
Thanks I wondered how that worked.
@zohnsonlighting-lynjoce82332 жыл бұрын
Very good video
@Aleph-Noll2 ай бұрын
im looking for something like this but that can be hung like a mirror vertically on the wall and has a plug so that i dont need to hardwire it for an art project, but i dont think they make them. i might have to DIY a solution
@arealmaintenanceandrepairl11032 жыл бұрын
Houses that have the recessed boxes for tubes lights they have a 2x4 plastic sheet cover can I use these for that install delete light and clear cover and install this led
@ridefitnation Жыл бұрын
Great video. Thank you
@cliffordhuffman52242 жыл бұрын
Great video. Thank you!! I am replacing my parents kitchen lighting with 2 2x4 LED lights.
@olamled2 жыл бұрын
Thanks very helpful👍
@ay-ayatenkapanget59832 жыл бұрын
Pls installed led panel omni 120 x 30 thanks...
@shawncrogan68682 жыл бұрын
Thanks very helpful
@ToolboxDIY2 жыл бұрын
Glad to hear that!
@ComgrowOfficial2 жыл бұрын
Great video👍👍👍
@kentdavis444610 ай бұрын
I have 3 wires in my ceiling, the fixture has black, green, white, a purple and grey for dimming
@austinartfx Жыл бұрын
Please Provide a Link to the Light Fixture and Frame :)
@ToolboxDIY Жыл бұрын
I'm intentionally omitted it because I'm not pleased with these particular panels. I cannot in good conscience subject my viewers to these!...Still looking for a good alternative.
@WestCoastDP Жыл бұрын
@@ToolboxDIY What's the problem with them? I'm still looking.
@Rogueknowledge2 жыл бұрын
Great stuff bro thanks 🙏🏽
@ToolboxDIY2 жыл бұрын
You bet
@camrynhunter69692 жыл бұрын
This is awesome. Was just watching other videos. How to install panels. This is perfect. 💯 Thanks a bunch
@ToolboxDIY2 жыл бұрын
You're very welcome!
@octolinggamer2.0 Жыл бұрын
Can you make the light any color you want like navy my favorite color
@ToolboxDIY Жыл бұрын
In my experience, you have to choose the color when you purchase the panel. I have not seen any that are navy, but I have seen some where the panel looks a skylight with clouds and a blue sky.
@octolinggamer2.0 Жыл бұрын
@@ToolboxDIY yea but can you replace bulbs when they blow or do you need get a new pannle
@octolinggamer2.0 Жыл бұрын
@@ToolboxDIY I’ve seen a 24 by 24 pannle that was color changing with a remote and I’m kinda interested how to do that
@johnkinsfather642 жыл бұрын
What if you have interior areas with fluorescent and want a warm light not bright white.
@ToolboxDIY2 жыл бұрын
You can find panels in color temperatures ranging from 3000K (warm) to 6000K (bright).
@martinduffy3835 Жыл бұрын
obviously you are not talking about commercial right ?
@kellymoses8566 Жыл бұрын
My office is installing these and they are too bright
@TheDonkee197628 күн бұрын
Many are dimmable. But up to them as to whether they care to tone things down... good luck.
@petethorp41488 ай бұрын
Too much time-wasting and intrusion from advertising so I shall not be back !