LED Strip comparison - 2835 3014 5050 5630 7020

[@rafaurl]

awesome! it's great to find simple videos with usefull information like yours without loud music. thanks for your work!

[@cordescreations536]

might be older but still one of the best i have seen. Thanks for taking the time to make it.

[@ohfrickitspeppers]

so this video is 2 years old now, i'll need to do a new video soon from comments things to improve: show measurement as lux instead of lumen use a specific length (1m) so people can calculate watt/m etc include links to where products were bought measure heat show power supply include link include link sheet with data include clip of plants growing under strip

[@gilang27]

Amazing! My head are getting nuts everytime searching for LED bulb saying SMD xxxx. Don't even know what that means related to the lumen and price.

[@Mike-gg7yb]

Any update on the new video?

[@ohfrickitspeppers]

@@Mike-gg7yb i got side tracked with samsung and bridgelux linear led modules

[@eggplantstar914]

@@ohfrickitspeppers When comparing these to for instance, the bridgelux eb series (bxeb 280mm), the bridgelux produces 1200lm at 7 watts (350ma). Is the 3014 really a stronger and more efficient light or am I missing something in this comparison?

[@christopherstaples6758]

any eta on redo will be interesting to know if 3014 is still best

[@rubyrose49]

I’m into tropical houseplants and there is a huge myth that regular leds are not effective. If peppers can grow using regular leds, I think houseplants can as well. I’ve grown my houseplants using regular led bulbs and they are fine. I will be buying strip lights so this video helps a lot. Thank you.

[@Ahoy123]

did it work?

[@trustnoone3795]

Another good production. As I wrote in a previous comment regarding one of your videos, you keep it simple. Although you added the watt & lux meters, it didn't complicate anything. The extra info. you provided by using the equipment was very helpful. In particular, the lux meter. As I said in my previous comment, I've been an electronic tech for 40 plus years & I'm wanting to change out lighting fixtures in my shop using LED strips. You tested other strips this time, and I thank you for that. Now I need to decide what I'm going to go with. The nice thing about these strips is they can be cut to pretty much any length so a person could make any size or shape of fixture you may need. Thanks again for this informative video, and take care.

[@ab_ab_c]

Well done! Thanks for sharing your findings.

[@Bzyko78]

Very nice test, i was always using 5050, looks like 3014 will be my new choice. More efficient but just to let everyone know I never had a failure of 5050 led strip so reliability is very good, hope 3014 will continue the trend. Thanks for video

[@punityaduvanshi730]

Bartosz Bzyko bro which is best led strip type for home and play with music

[@alvinchan929]

friend,maybe you can consider 2835,it have one led is 26-28lm,so,have more efficient,details,please check the links: alvinbloggeraddress.blogspot.com/2018/07/high-luminous-efficiency-natural-and.html

[@duronboy2]

Thumbs up for the summary at the end

[@doctari1061]

Excellent. Thanks for sharing.

[@dekstaaa]

Very informative, exactly what I was looking for. Thank you!

[@aelshesh]

The best comparison

[@elcocinerofly]

thanks for all this work!

[@pierrex3226]

That's awesome. How about cob strips? How do they generally compare to smd strips?

[@tomjaworskininja]

Great test ,for the future tests could you please do a temperature reading that would be greatly appreciated because using heatsink is not always possible

[@santaclaus9708]

Thanks so much for this. i'm rather illiterate about these, but like their brightness for the dome lights, etc. in my car. I hope you'll do another one of these, as there continues to be more and more on the market. maybe include cree models in some way, as they often claim to be the brightest in the world. Thanks again. Greatly appreciated.

[@dmitriypopov8946]

Спасибо, за тесты лент. Это пригодилось.

[@decem_unosquattro9538]

Very aluminating sir! 🙂👍🏻

[@ledmoonlightcom]

Great! Very nice video!

[@AlhamRana]

I was kinda feeling like a university class room, though I've never been in One.. Anyways thank you for the accurate test ever..awesome video..

[@aadirajput531]

best video till now..

[@josephsmith8448]

Awesome video, thanks.

[@ItsLancePants]

EDIT: Nvm, Then realized you added the source at the end of the vid. Thanks!

[@jaberimran6279]

Thanks mate 👍

[@pcenthusiastbd894]

Thanks. Very informative mate. Which is quite rare these days. Could u tell me what was the length of each strip u were measuring luminance of?

[@erikaboyer4125]

Thanks for doing the homework!!!

[@evenflow711]

Thanks for the test, to clarify you are measuring lux and not lumens and so your table at the end of the video is misleading. At over 200 lumens per watt these Chinese LEDs would be the most efficient in the universe! Big difference between lumens and lux.

[@ohfrickitspeppers]

yeah sorry about that, next video i'll make sure to use the correct unit.

[@adamek1xd]

1lux = 1lm/m2

[@AznTony360]

I wanted to know the brightness to pick from before realizing that I actually had an extremely limited space for a row of 3 strips. Area only being 15mm total. Found out the 5050/5630 smd total width is between 8-10mm, while the 2835 smd is 6-8mm. Varies from vender to vender. Only way 3 strips will fit is if I ordered the 2835 and overlap them a mm or 2 on each. The only way to go without dropping to a smaller smd, which will further reduce brightness.

[@YannisFyssas]

This is excellent ! I am surprised to find the 3014 is the brightest, but this is from 2017. What are your thoughts on the SMD5730 ?

[@EarthquakeCL]

or the csp chip

[@hotcoffee1068]

you're awesome, this is what I'm looking for. thank you so much

[@rsxen8990]

damn. wish I had seen this video earlier. been wasting my time doing a whole house and workshop replacement. I went from the cheap "2000" lumen plug and play, to 5050, then to the 2835 which for near same wattage pull when doubled up (16ft ea) would pull about the same as 5050 16ft and run way cooler. Now I see that maybe 5630 or 3014 could be better. Thanks for the video!!

[@kelauben]

I must have missed it during the video but where did you buy the lights from? Did I hear AliExpress? -thanks

[@ohfrickitspeppers]

Karl Laubengayer yeah AliExpress is cheap because direct from China. Just search LED strip and whatever model #

[@NYinSD]

great video. thanks for the tips.. did you make a new video? love to see it..

[@tinyhydrogreens1932]

I was trying to decide between the 3014 with 204 led per meter and the 2835 with 240 led per meter. I tested a 1 foot long 2835 led strip and a 30 watts LED driver. I used the same android app that you used last year. I know the app is not as accurate as the Zondaj Lx 1010B. The lux reading I got at 12 inches of distance was 1854 lux versus the 1425 of the 3014 from your test. The watts reading was 10.2 vs the 5.2 of the 3014. The led strip got very hot. The price of the 2835 is twice as expensive as the 3014. Based on the results of the tests, I would pick the 3014 because it consumes less watts and the lux difference is not that much. For future tests please include the 2835 with 240 led per meter. I would like to see if my test was accurate. Thank you for sharing.

[@ohfrickitspeppers]

Engi Coding that's what I thought would happen. Those 2835 240/m are meant to be used with aluminum fixture increasing their cost even more. There are simply too many led and not enough space to get rid of the heat.

[@alvinchan929]

yes,if the led strip work with aluminum profile,than,will reduce the hot,and have more life span. also,for 2835 240led/m,it can make low watta,we can custom the watta and length for our customer. Like,we custom 6w/m 2835 60led/m 10mm pcb,and 10 meters long.

[@revolvingwonder3777]

Thank you thank you! just what i needed to know!

[@brentkelly5445]

That 3014 is .5 amp at 12v? And provides 1400 lumen? my gas camp lantern that I think is pretty good is 500 lumen. I don't understand driver's, protection. Do you need a driver for a strip that has the resistors in the line?

[@appletree5597]

Thanks you so much for uploading.

[@marcinoz48]

Good job 😎

[@francescovalle8678]

Thanks for your test, very useful

[@sergei_dmitrievich_beskishkov]

Excellent! Thank you!

[@imemyself2820]

Thank you so much I was completely in the dark before watching this :) I wonder if the 5730 is brighter than the 5630, why was is not in this test?

[@ohfrickitspeppers]

they are pretty much the same chips.

[@imemyself2820]

Alright, thank you so much for your reply!

[@jacek7178]

thanks, very useful.

[@jtn191]

excellent work! thanks

[@patrickjosephtorres3190]

What LED strips you prefer for hydroponics?

[@thssportingcenter1]

Great stuff Thank you

[@hilaryritchie3447]

Are you confusing the 2835 with the 3528? As our 2835 is 9.60W for 1ft where as our 3528 is 3.2W ft????

[@ArnaldasAugutis]

I've just got 3014 and i see no difference with 5050. Not sure if i've got pour quality 3014 or my 5050 is super bright

[@hamidmostajabi8800]

Thank you very much!

[@Mroswaldo16]

Which do you recommend, i want something that lights up were its pointing.

[@random2059]

Sir if i connect a 3528 led strip ir controller to a 2835 led strip ....will it damage the the 2835 leds.... Because they come with same voltage but different current draw Please reply .....??

[@ohfrickitspeppers]

no the leds will only pull the current required, a good 12v power supply (like meanwell) will work for any of these strips.

[@diastoleny]

Great demonstration! Can anyone recommend a popular online supplier for led strip lighting? I'm in need of a 40' run with a single 11' bridge gap. Unfortunately the inexpensive 16'4 won't work for me. Thanks!!

[@abudmajid3183]

pleas i need help i bought led strip lights 5050 5meter x20 which is 100 meters how do concert it withe 5rgb amplifier and 5 power supply plus 2 led controller i want to setup them in my fence

[@dyhawxyde7393]

Are the 3014 not getting too warm ? I want to use them but I fear that without a heatsink, 204/m gets very hot ? Thanks !

[@MyriophyllumTuberculatum]

very very hot, without heatsink it goes up to 100°c, they need a heatsink or they will burn in a short amount of time

[@julus1978rusty]

excelent, regards from argentina.

[@sarshalomin]

Thank you so much

[@inthemerde]

there is no sound during 5 minutes it is like a silent movie! is the watt number per meter? cause the strips look much shorter.

[@xenodf6069]

Which would be good enough to grow plants in. A aquarium?

[@dmoore0079]

I've had good luck with 5630 or 5730 for aquarium lighting. For best results, stick it onto aluminum flat bar stock (1/8" thick and 2 to 3" wide. Can be cut to length to fit your aquarium). An excellent choice is the high CRI LED strip that's marketed toward DIY photography lighting. Very, very bright and plants/fish look fantastic under it. You'll want something in the daylight spectrum (5000 to 7000 kelvin).

[@cooperado1826]

Muito bom, parabéns pelo teste

[@616585htd]

Is there a recommendation on the white color (cool white, warm white, etc) of LED strip for growing vegetables? Is 6500K the best for veggie state?

[@seasidescott]

These aren't the type for growing, those are much brighter often HID, HPS, or MH depending on the spectrum for the type of plant. There are led strips that are infrared-ish and ultraviolet-ish that can help as long as they are very close to the plants, like within 6 inches.

[@mentalpatientMp]

So the 3014 LED produces a whopping 274 lumens per watt, meanwhile Lm301b's produce a lousy 220 lumens per watt? Something seems off here...

[@ohfrickitspeppers]

as pointed out in a comment below i was actually measuring LUX not lumens, i'll have to redo the video soon and i'll correct it.

[@rsxen8990]

@@ohfrickitspeppers however Lux is actually more important IF you want to light an area, usually the point of these high output LED. I had LED bar rated at 2500 lumen but only at about 6 in. away. great video.

[@fatihozcelik8528]

I have a question ..... I bought a new apartment, so I want to install all over with good led Stripes (RGB ones), but I don’t now which one I should pick here ? They are so many models I don’t now which is the best or is recommended. I like install the LEDs under the kitchen cabinets, on the ceiling as cool lighting, behind the tv so I get a really good effects ... and i want to control it over WiFi and use Alexa or Google Home with the Stripes. The Philips Hue lightstripes are my favorite at the moment but they are very expensive, then I need i guess about 30-50m of the LEDs , so I want to ask which one u can recommend here with a really good power supply, so I can go max brightness 👍

[@marounhabche7728]

contact hellofish on aliexpess, i bought all my strips from that store. very gd quality with gd price

[@syaifulumam1980]

thks brother.... i hv trouble with 3014...its so hot if its work at 12v 1,5A..(heatsink installed) there are alot of resistors n led its self...i thinks thats d trouble.. so...which one coldest led from all of them?thkz🙏😅

[@bennyfata1293]

2835

[@hermanhermitz9101]

These are the references: Cool white 5050 SMD 60 LEDS (14.4w p/m) = 1080 lumens per metre Cool white 2835 SMD 60 LEDS (12w p/m) = 1300 lumens per metre Cool white 2835 SMD 120 LEDS (24w p/m) = 2600 lumens per metre Why your results put 5050 above 2835 lumen-wise?

[@harshelectronics8182]

Share purchasing link

[@oleb-1121]

Thanks men. 23-feb-2020

[@kansasgardener5844]

My lights are on the way. I was wondering if you have used them as grow lights and if so how are they performing? Update........... 5/14/18 The lights never came and that website aliexpress is horrible to try to get a refund from! At least I can buy them on eBay. And eBay has never let me down!

[@ohfrickitspeppers]

yes, can check my other vids. or my glog on thp. thehotpepper.com/topic/67273-juantio-grows-2018/

[@kansasgardener5844]

I just watched some of your videos. Cant wait to start experimenting with some of my veg starts. Thank you.

[@revolvingwonder3777]

ive lost less on ailexpress than ebay. £50 on ebay and £10 on aliexpress. yea its more work, and communication can be difficult. pictures and checking all drop down menu options help. in my experience.

[@Regalya]

Would it be possible put 1 meter 5730 (72 led 5w) on a computer usb instead of power supply ?

[@malinirajendran523]

Plz give the watt per LED.

[@kuldeepkumawat356]

Sir 5050 60 led in 1 miter power consum 4 watt

[@andyd3540]

Thanks a bunch

[@cjmccall7879]

Can someone explain me what means of the 2835 5050 etc ? Asap

[@ohfrickitspeppers]

these are different models of led. its the size of the led chip. 5050 = 50mm x 50mm

[@hradrecords5277]

Samsung 561C do you know if these are available as in strips ? i know that a grow fixture with these chips costs about a 1000 dollars

[@hamidmostajabi8800]

I would like to use LED strip on a piece of wood. do you think it is dangerous because they get hot?

[@ohfrickitspeppers]

It will be fine you will need to secure them with better glue or something. the provided adhesive is not sticky for plastic / wood.

[@stargazer_100]

The best lighting strips mostly use 3M 468MP Adhesive Transfer Tape. You can get it at www.amazon.com/3M-Adhesive-Transfer-468MP-Multiple/dp/B00P7K7T84 You probably want to get 1/2 inch wide to fit the lighting strip, in whatever length you need.

[@carlos68830072]

Thanks

[@KM-bj4ju]

How I know the sutible voltages for strip

[@ohfrickitspeppers]

these are all 12v, it will say on the page you buy them

[@mayetpierre-xavier2367]

Hi Many thanks for this test I hesitate between 2835 120led /m and 2835 180led /m to cultivate in a greenhouse 1m20 / 1m20? Your opinion ?

[@ohfrickitspeppers]

180/m are really close together i would worry about heat.

[@mayetpierre-xavier2367]

@@ohfrickitspeppers Thank you for your advice. What do you think of this product which must be excellent quality: fr.aliexpress.com/item/5M-1200LEDS-24V-3014-SMD-LED-Strip-10-12LM-240LED-M-Gold-Line-LED-Ribbon-LED/32811570671.html?spm= a2g0w.search0604.8.4.345833f6q98xAI They say that the product has been optimized and that it heats much less but it is still 24W / m .... Otherwise what do you recommend? The 3014 with 204led / m seems to be the right compromise but I'm afraid the quality is not as good as this product?

[@3choblast3r4]

Hey man, could you please recommend me the brightest best possible RGB led strips I can buy from aliexpress. And what i would need for a good ir/rf or wifi setup. (Power brick/ other cables etc) I want to put LEDs all over my room and behind my TV but I can't pick what to buy. I'm incredibly confused.

[@ohfrickitspeppers]

5050 are pretty standard for rgb. they have kits on amazon that include the remote and everything www.amazon.com/s?k=rgb+led+strip

[@crnizola]

THX

[@kansasgardener5844]

I would like to use the 3014s for vegetable seedling starts. The only ones I can find on eBay are 600 LEDs per 5m. Where do you get yours and could you tell me what power supply I would need per 5m? Thanks

[@ohfrickitspeppers]

they are available direct from china on aliexpress.com, shipping is 3 weeks. like this: www.aliexpress.com/item/5M-Ultra-Bright-SMD-3014-LED-Strip-DC-12V-1020-LEDs-Flexible-Waterproof-Led-Strip-High/32781664404.html per 5m you should use 12V, 5 or 10A power supply.

[@kansasgardener5844]

Juanitos Peppers Thank you.

[@yogydiaz]

Juanitos Peppers I try to purchase the LED strips and pay with PayPal wich didn't work. It's safe to use your credit card?

[@kansasgardener5844]

Edwin Diaz Probably just as safe as PayPal.

[@ohfrickitspeppers]

yes you can use credit card on aliexpress... It's a major company on the stock exchange with 550 million users.

[@mustafa-kamil]

Thanks man good work..💪💪💪💪

[@GuitarLessonCharts]

What length were the strips cut at?

[@huntreiser]

Are you saying that the good 5630 burns 5.2 watts per foot or per meter?

[@alvinchan929]

In my company,it can be 5.5w/per foot. also with UL certoification. could you tell me you need sample?

[@mikedisher30]

why are there 2 5630 and how do you know if its good quality or not?

[@ohfrickitspeppers]

i bought them from different suppliers. I was just showing that power can vary even when using the same model SMD LED. if it is labeled better i think it is better quality. but there is no real way to know without having industry experience / talking to the vendor.

[@bonvoyage770]

Juanitos Peppers hello, how about CRI? I saw on eBay 5630 led strips with CRI 80+, 95+. But the price of it pretty bigger than usual 5630. Is it just a marketing lie with CRI or the price actually justified? I would to figure out what the difference and how to choose the good strip for less budget. I want to use these strips for camera lights as softbox.

[@БаронфонВатан]

Spector? Kelvins? 6500 Kelvin?

[@БаронфонВатан]

7:44 model 2835 cool 6500 Kelvin?

[@frankshaw2745]

That's the color temperature

[@andersonbruno0201]

what is the temperature 5630 in use?

[@Cre8ionz.]

3014 can`t be the brightest...7020 is, followed by the 5730 and 5630

[@Cre8ionz.]

www.ledkauf24.de/media/image/5b/09/8d/SMD-Unterschiede.jpg

[@o00rain00o]

is that W per second or per hour?

[@ohfrickitspeppers]

Watt is per second.

[@anthonytran9191]

Thx for the share.

[@MrAutomatyk]

Soorry, but I believe these results are not reliable. Multiple measurements from different directions lying on the sphere should be combined, not just one maximum. Diodes have different directional characteristics.

[@fibranijevidra]

Somebody have some reliable supplier of good quality led strips presented here?

[@ohfrickitspeppers]

i buy them on aliexpress. buy from vendor with good reviews / score.

[@chengnico4853]

Hi Sasa Djuric, Welcome to Our Website: www.winlites.com.tw/led-lighting.html If you are interested in these item or any enquiry, please feel free to let us know. We will attend 2018 autumn HKTDC-Hong-Kong-International-Lighting-Fair, and will be pleased to have you visit us.

[@IAmMisterD]

which power supply is needed for the 3014s?

[@lilithh1429]

as long as you get a 12v dc power supply it is ok. How many amps you need depends on how long of strip you have. Generally 5 Amp for 1 normal strip. like this: www.amazon.com/LPV-60-12-Supply-100-264VIn-Sealed-Driver/dp/B00DED2YLI?th=1 or this: www.ebay.com/itm/12VDC-2A-3A-5A-6A-10A-Power-Adapter-Supply-Fr-5050-3528-5630-SMD-LED-Strip-Light/401030373195

[@alvinchan929]

just accoring to the led strip power,if led strip is 12v,so,the power need to be 12v. if 5 meters is 60W,the power must be above 60W,the better suggest is 60/0.8=75w. are you interested in led strip? any question you can send email to me.

[@IAmMisterD]

Thanks Michael :)

[@justizfreund9959]

You have a LUX-Meter. You did not measure lumens but lux. en.wikipedia.org/wiki/Lumen_(unit) en.wikipedia.org/wiki/Lux But this is not important for the result in the present case.

[@darkness1943]

are you sirious? measures with an high voltage wattmeter? and you not compare how many leds per meter.... So, your test says nothing...

[@mamachawngthu95]

Add buy link

[@ohfrickitspeppers]

www.aliexpress.com/w/wholesale-3014-204.html?site=glo&SearchText=3014+204&g=y&brandValueIds=201564099

[@alvinchan929]

if any question about led strip,you can contact us starwire,[e-mail]

[@beesdreams9]

More helpful if you would have pointed them at a wall, perhaps next time!

[@MesutSarikan]

yüksek teknoloji bitki tankım için armatür yapmam lazım, 5630 kodlu 6500 kelvin veya 5730 kodlu 10000 kelvin smd led kullanmam lazım soguk beyaz nereden bulabilirim ve ne kadara patlar görseldekinden yapmam lazım prntscr.com/qqi09b

[@bogdanandrei9619]

Thank you for sharing this test with us. I would like to purchase the 5630 (Good quality) for my investment. However i'm a bit confused right now because a similar test on 5630 was done here ( kzbin.info/www/bejne/i56knoaNjpZsrbs) and it sounds like the light is dim, even if the led profile looks very similar. Could you please post some links from Aliexpress where i can be sure the outcome will be similar with yours? thx

[@tjam4229]

Why do you keep moving the tripod? Just leave it in-place to be more scientific.

[@richardd3663]

Well when you do update it can you just publish the results and not show us the tedious measuring process? I stopped watching after 2 mins it was SO boring!

[@buffyplays2577]

actual moron

[@jonnyc2.047]

if u can i like to speek on than chips that u like in the video lmk i have mad channl for growin madicool lol i no how to spell just massing a roud lol thanks hit me bak thanks

[@OCIAKTechChannel]

thanks