When I got my Loadmaster the carriage was out of adjustment, all you have to do is loossen the bolt on the bottom of the ram and pull the carriage towards the frame so there is about 1/8 inch clearance to the indexing rod and it will index perfect.
@NickShootsStuff2 жыл бұрын
yup, been doing it every 3k rounds or so
@zap01502 жыл бұрын
I have a load master I’ve loaded close to 1000 rounds on it I just got the helping hand because it would not index at all now it’s indexing as it shouldBut my shell plate plate is always off it needs to turn counterclockwise just a little bit I have to leave the turret loose so we can move back-and-forth to get it to cycle correctly i’ve adjusted the carrier I don’t know if any other adjustments also the priming rod hits the shell plate
@zap01502 жыл бұрын
Any advice would be appreciated thanks
@NickShootsStuff2 жыл бұрын
@@zap0150 It sounds like you need to adjust the alignment: kzbin.info/www/bejne/sKHNpqKIqtSbnLs
@jakesarneky65692 жыл бұрын
I need to have a convo with you to pick your brain on how to get this project rolling for myself
@NickShootsStuff2 жыл бұрын
Leave a comment with any questions you have and I'll do a video Q&A =)
@Kennyy2122 жыл бұрын
What’s your bullet feed setup for your cast bullets?