Lee Loadmaster Primer on Bottom conversion kit with Tube Feed Primer

[@ohms139]

Andy is brilliant with his mods for the Loadmaster. I've purchased two of the case feeder and primer mods for both my Loadmasters. These upgrades saved me from having to switch to the 6 turret press!!

[@MrTrollHunter]

Wow, now with priming on the bottom you can actually use this press as the five station press it should have been from the start. The way it is set up originally with priming on the top you basically loose one station. Excellent

[@mrsa101]

I am very interested in this. i have recently had two carriers break on my where the primer arm attaches. carriers are getting hard to find. I assume with this i could use any of my broken carriers still. I don't know much about 3d printing. has this held up to extended use?

[@AndyDep]

hi This primer system does not use the original primer arm. Please send a picture of the broken part of carrier to [e-mail] and I will let you know if this can work with your carrier.

[@Paul-dc6sp]

If I had seen all these updates to this press, I would have updated my Loadmaster instead of buying a Lee Pro Six Pack. Excellent work. Curious how many primers fit in the tube?

[@AndyDep]

Thanks Paul, the tube will hold 100 primers.

[@GrumpyBumpy]

My loadmaster carrier was modified by Mike’s Reloading Bench with all his primer feed system mods. Will your system work with my press? My original case feeder works fine if the cases don’t hang up with grit or wrong size cases. What does the top mount case feeder do for the press?

[@AndyDep]

I am not familiar with Mikes modifications to the loadmaster but if the original lee primer and primer pin still fit in your press then this will most likely work. The top mount case feed is easier to adjust vs original lee and keeps all the cases stationary instead of going up and down with the ram

[@GrumpyBumpy]

Yes my carrier still works with rhe primer pin and the side mounted primer arm. What sort of adjusting is necessary with your kit to get it dialed in correctly? Also does it come with rhe primer tubes or do I have to buy those elsewhere. I have some primer tubes that fit my Lyman Rock Crusher single stage press.

[@AndyDep]

@@GrumpyBumpy The kit comes with primer tubes but can use any 5/16 od tubes The main thing that requires set up and adjustment is getting the indexer to work smoothly but this is similar to what you all ready do on loadmaster

[@michaeljacob9614]

Awesome! Can you still use the Lee case feed system with this?

[@AndyDep]

Yes, it works with the original case feed and the new case feeders on my etsy shop

[@zns9595]

Excellent, is the primer sitting depth still adjustable?

[@AndyDep]

The primer depth is set by feel same way Dillon 550 works. If you force press to full down you could crush or dimple the primer. There is no mechanical adjustment for seating depth.

[@tashwillafrika3322]

How do i get the primer system and the indexer system please

[@AndyDep]

The address of Etsy shop is in the video description

[@tashwillafrika3322]

Andy thanx for your hard work I would love to get the whole setup you have but I can't order and have delivered to south africa 🇿🇦 is there a way I could buy the files to print my own thank you

[@AndyDep]

Hi, thank you for the interest. I am undecided on if or when I will offer the files for sale. If you follow my etsy shop you will get updates on new postings when they become available.

[@ZuluAltang]

Also really interested. Here from 🇿🇦

[@AndyDep]

All files are available in n my Etsy shop for the prime on bottom! adepdesigns.etsy.com